Sharif Digital Repository

In this paper, three metal-organic frameworks (Materials of Institut Lavoisier: MILs-100 (Fe)) as porous nanomaterials were synthesized using FeCl3, Fe(NO3)3 and Fe2(SO4)3 and denoted as MIL-100-1, MIL-100-2 and MIL-100-3, respectively. The synthesized MILs-100 (Fe) were characterized by FTIR, SEM, TEM, XRD, UV–vis DRS and zeta potential. Basic Blue 41 (BB41) was used as a model dye to study the photocatalytic dye degradation ability of the synthesized metal organic frameworks. The results showed that the synthesized nanomaterials decolorized BB41. The decolorization kinetics followed first-order kinetic model. The rate constant was 0.0034, 0.0041, 0.0091 and 0.0289 (1/min) for 0.01, 0.02,... 

The major purpose of this research is increasing the photocatalytic activity of TiO2 nanotube arrays by doping with sodium and carbon for using in water splitting as photoanode. The synthesized TiO2 nanotubes (TNA) were characterized using FESEM (Field Emission Scanning Electron Microscope), XRD (X-ray Diffraction), DRS (Diffraction Reflection Spectroscopy) and XPS test (X-ray Photoelectron Spectroscopy) analyses. The results of FTIR and XPS confirmed the presence of sodium and carbon in the lattice of TNA as dopants. Moreover, the DRS test showed the decrease in the band gap energy of TNA from 3.20 to ∼2.88 eV; uv-visible test exhibited extension in the absorption edge of pure TiO2... 

Au@TiO2-Graphene (GR) nanocomposite was prepared using photocatalytic reduction method. TiO2-GR nanocomposite was synthesized under UV irradiation of deaerated ethanolic suspension of TiO2. The nanocomposite was calcined at 400∘C followed by loading of highly dispersed Au nanoparticles throughout the deposition-precipitation method. The Au@TiO2/GR was characterized by X-ray diffraction, X-ray photoelectron spectroscopy, diffuse reflectance spectroscopy, transmission electron microscope and the BET surface area measurements. It was found that Au-TiO2-GR and TiO2-GR nanoparticles have smaller crystalline size and higher surface area than pure TiO2. Presence of highly dispersed Au nanoparticles... 

Herein, a novel quaternary Ag3PO4/BiPO4@MIL-88B(Fe)@g-C3N4 (AB@MIL-88B(Fe)@g-CN) nanocomposite with a core@shell structure is successfully fabricated in two simple steps. The prepared samples are characterized via various techniques. The photocatalytic activity of the prepared samples is evaluated by the degradation of navy Acid Blue 92 (AB92) dye as an organic pollutant under visible light irradiation. Highly enhanced photocatalytic efficiency is observed for the quaternary AB@MIL-88B(Fe)@g-CN nanocomposite compared to that for the other samples. The experimental results indicate that the photocatalytic activity enhancement is mainly attributed to the strong visible light absorption and... 

In this study, MoS2/reduced graphene oxide (rGO) was used as a cocatalyst to synthesize very highly efficient Cu2O/MoS2/rGO for cooperative catalytic applications. The resulting nanocomposite was characterized by various analytical techniques and applied for catalytic reduction of 4-nitrophenol (4-NP) to 4-aminophenol and photocatalytic degradation of Acid blue 92. Cu2O/MoS2/rGO composite presents superior performance to pure Cu2O particles in both catalytic and photocatalytic reactions. This excellent activity demonstrates synergistic effect of MoS2/rGO as a cocatalyst in the nanocomposite. The role of the active sites in the reduction of 4-NP and degradation of dye was discussed and... 

The main aim of this research is to improve the photocatalytic activity of TiO2 nanotubes by co-doping with copper and sodium for application in the water splitting process as a photoanode. The doping was performed simultaneously to the anodizing process through a single-step treatment. The synthesized TiO2 nanotube array (TNA) was characterized by applying FESEM (Field Emission Scanning Electron Microscopy), XRD (X-ray Diffraction), DRS (Diffraction Reflection Spectroscopy) and XPS (X-ray Photoelectron Spectroscopy) analyses. The results of XPS analysis proved the presence of copper with valence (2+) and carbon and sodium with valence (1+). Moreover, DRS tests showed a reduction in the band... 

Sol-gel technique was used to coat multiwall carbon nanotubes (MWCNTs) with anatase titania to increasing the surface area and improve the photocatalytic activity of TiO2. Room temperature ballistic conduct of MWCNT combined with semiconducting behavior of anatase brought about a photocatalytic improvement of ∼37 % with respect to the highest methyl orange decolorization flair. For characterization and photocatalytic efficiency determination, X-ray diffraction (XRD), field emission (FE) scanning electron microscopy (SEM), x-ray photoelectron spectroscopy (XPS), diffuse reflectance spectroscopy (DRS) and ultraviolet visible (UV-vis) spectroscopy were rehearsed. Attachment of anatase... 

The photocatalytic activity of mesoporous TiO2 modified by the addition of carbon nanotubes (CNTs) and Cu is reported. Nanocomposites of carbon nanotubes (CNTs) containing varying amounts of Cu were formed by treatment with Cu2+ then reduced to Cu0 using NaBH4 as the reducing agent. The mesoporous TiO2, synthesized by a sol-gel method from titanium isopropoxide, was combined with the CNT/Cu nanocomposites to form the photocatalysts which were characterized by XRD, SEM, TEM, FTIR, XPS and BET surface area analysis. The photocatalytic properties of the mesoporous TiO2 composites were studied by measuring the degradation of methyl orange (MO) which was optimal in the sample containing 20wt% of... 

Visible light-active BiOCl/BiVO4/mordenite and Ag/BiOCl/BiVO4 nanocomposite with a p–n heterojunction structure were prepared. Mordenite nanocrystals were synthesised using the hydrothermal method. Deposition and reduction methods were utilised to modify the Zeolite surface. The photocatalytic activities of the heterojunctions were investigated by scanning the change of Acid blue 92 (AB92) concentration under visible irradiation. The nanocomposites demonstrated improved efficiency for dye photodegradation. The activities are due to strong oxidative ability and efficient charge separation and transfer through the BiOCl/BiVO4 p–n junction. The photogenerated electron-holes react with species... 

CuO flower-like microcrystals, prepared by a facile template-free thermal method, showed incredible photocatalytic activity towards degradation of Acid Blue 92 (AB92), an organic wastewater, Escherichia coli and Staphylococcus aureus pathogenic bacteria under visible light. The products were well characterised by X-ray diffraction (XRD), Brunauer–Emmett–Teller (BET), scanning electron microscope (SEM), Fourier transform infrared (FTIR), photoluminescence spectroscopy (PL) and diffuse reflectance spectra (DRS) analysis methods. The XRD pattern of the products well confirmed the formation of copper oxide crystalline phase without any other impurities. The results of the photocatalytic... 

A novel visible-light-driven Ag3VO4/Ag3PO4/Ag photocatalyst was successfully synthesized via an anion-exchange reaction and characterized by X-ray diffraction, field emission scanning electron microscopy, X-ray photoelectron spectroscopy, UV-vis diffuse-reflectance spectroscopy and Fourier transform infrared spectroscopy. The photocatalytic activities of prepared catalysts were evaluated by degradation of acid blue 92 (AB92) aqueous solutions under visible light irradiation. The photocatalytic results indicated that the synthesized Ag3VO4/Ag3PO4/Ag hybrid displays a significantly enhanced activity in degradation of acid blue 92 under visible light compared with pure Ag3VO4. The improved... 

The main aim of the present study was to enhance the degradation capacity of Acid Blue 92 (AB92) by visible-light-active Ag3PO4 nanocomposites based on g-C3N4 and Multiwalled Carbon Nanotubes (MWCNTs). The nanocomposites were fabricated through a tunable in situ deposition method. The properties of the resulting samples were investigated by X-ray diffraction, scanning electron microscopy and Fourier transform infrared (FTIR) spectroscopy. The photocatalytic activity results revealed that the Ag3PO4/g-C3N4 heterojunction inorganic/organic composite exhibited an improvement in both efficiency and the rate of AB92 photodegradation in comparison with the others. The enhanced photocatalytic... 

A green mechanochemical technique has been developed for the synthesis of mixed ammonium silver phosphomolybdate salt, (NH4)1.6Ag1.4PMo12O40.4H2O with sheet-like nanostructure. The reaction was prompted using acetamide/NH4NO3 at room temperature. The change of driving agent to urea at the same conditions led to an epitaxial growth of hierarchical microstructure of this polyoxoanion. The morphological and structural features of the prepared specimens were discussed in detail. The photocatalytic performance of the resulting nanosheets for removing 4-nitrophenol (4-NP) in water under visible light... 

Global environmental pollution and energy supply demand have been regarded as important concerns in recent years. Metal oxide semiconductor photocatalysts is a promising approach to apply environmental remediation as well as fuel generation from water splitting and carbon dioxide reduction. ZnO nanostructures have been shown promising photocatalytic activities due to their non-toxic, inexpensive, and highly efficient nature. However, its wide band gap hinders photo-excitation for practical photocatalytic applications under solar light as an abundant, clean and safe energy source. To overcome this barrier, many strategies have been developed in the last decade to apply ZnO nanostructured... 

Abstract A visible light active Ag2CO3/TiO2/2-hydroxylethylammonium formate (RTIL) nanocomposite has been synthesized via loading Ag2CO3 flower-like particles on TiO2/RTIL by a simple precipitation method. TiO2 nanoparticles were prepared by the modified sol-gel method using 2-hydroxylethylammonium formate (RTIL) as an ionic liquid. The prepared photocatalysts were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier transform-infra red spectroscopy (FTIR) and Diffuse reflectance UV-vis spectroscopy (DRS) techniques. The photocatalytic performance of the synthesized photocatalysts... 

Inclusion of carbon nanotubes (CNTs) into the titanium dioxide coating on 1050 aluminium alloy was studied with the aim at enhancing the corrosion resistance of the surface. Composite coatings with various contents of CNTs were prepared via the sol-gel method and dip coating. XRD and FTIR phase and structural evaluations showed the presence of anatase phase in all thin films. Concomitant enhanced corrosion behaviour in the presence of CNTs was resulted from polarization potentiodynamic test. Band-gap evaluation was performed using absorbance spectra of coatings and showed considerable decrease of band-gap energy in the presence of CNTs. Photocatalytic properties and hydrophilicity of... 

To overcome the drawback of poor solar light utilization brought about by the narrow photoresponse range of TiO2, a silver and sulfur co-doped TiO2 was synthesized. Using the prepared catalyst, solar photocatalytic degradation of 2-nitrophenol (2-NP) by a TiO2-based catalyst was studied for the first time. Effects of the co-doping on the structural, optical and morphological properties of the synthesized nanoparticles were investigated by different characterization methods: X-ray diffraction, N2 adsorption-desorption measurements, scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy, UV-visible diffuse reflectance spectroscopy and Fourier... 

Hollow microblocks of [Zn(anic)2], as a novel coordination compound, were synthesized using 2-aminonicotinic acid (Hanic) and zinc (II) nitrate tetrahydrate. The chemical composition of the zinc complex, ZnC12H10N4O4, was determined by Fourier transform infrared (FTIR) spectroscopy and elemental analysis. The synthesized zinc complex was used as a precursor to produce ZnO nanostructures by calcination at 550 °C for 4 h. Morphological studies by scanning electron microscopy and transmission electron microscopy revealed the formation of porous microbricks of ZnO nanoparticles. N2 adsorption-desorption analysis showed that the... 

The objective of this study was to model the extent of improvement in the degradability of phenol dyes by SnO2/Fe3O4 nanoparticles using a photocatalytic reactor. The effect of operative parameters including catalyst concentration, initial dye concentration, stirring intensity, and UV radiation intensity on the photocatalytic batch reactor during removal of phenol red was investigated. Fractional factorial design and response surface methodology were used to design the experiment layout. The SnO2/Fe3O4 nanoparticles were synthesized using the core-shell method. The results of x-ray diffraction and transmission electron microscopy showed the successful synthesis of these nanoparticles. The... 

ZnO was grown on mordenite zeolite, activated carbon and alumina substrates by a liquid deposition method. The photocatalytic activity of the synthesised samples was elucidated using the photodegradation of Acid Blue 92 (AB92) dyes as a test pollutant under UV light irradiation. Supports play a key role in AB92 photodegradation and significantly improve the photocatalytic activity of ZnO. Different supports form additional transport channels and provide an effective pathway for the charge carriers. The supports effectively construct porous structures with more active sites. Hence, the higher photocatalytic activity of supported catalysts is attributed to the large surface area and charge...