Sharif Digital Repository

Recently, huge attention has been drawn to improve optical sensing devices based on photonic resonators in the presence of graphene. In this paper, based on the transfer matrix approach and TE polarization of the incident electromagnetic waves, we numerically evaluate the transmission and reflection spectra for one-dimensional photonic resonators and surface plasmon resonances with strained graphene, respectively. We proved that a relatively small strain field in graphene can modulate linearly polarized resonant modes within the photonic bandgap of the defective crystal. Moreover, we study the strain effects on the surface plasmon resonances created by the evanescent wave technique at the... 

The current research focuses on suggesting a new potential application of polymeric materials for capacitor applications by focusing on polystyrene (PS)/ethylene-α-octene copolymer (EOC) blends. Polymeric materials have high dielectric strength (≈ 200 for PS), good processability, and flexibility. However, their low dielectric constants make them not suitable for capacitor applications. Therefore, suggesting a method for enhancing their dielectric constant accompanied by low tan δ proposes an excellent substitute for commonly used ceramic dielectrics. The current article investigates the control of the dielectric properties of PS/EOC blends by manipulating the graphene nanoplatelets (GNPs)... 

The presence of nodules on the surface of cathode copper plates was the most important reason for the failure of the punch of mechanical clinching of copper cathode sheets. This study demonstrated a comprehensive investigation into the nodulation growth of copper cathodes in the electrorefining plant based on metallographic analysis. More than 15 random samples were selected from the top, middle, and bottom of the cathodes produced in the Khatoon Abad copper refinery, Iran. Studies were carried out based on the determination of growth modes including field oriented isolated crystal (FT), basis-oriented reproduction (BR), field-oriented texture (FT), and unoriented dispersion (UD). A scanning... 

The recently proposed concept of metagrating enables wavefront manipulation of electromagnetic (EM) waves with unitary efficiency and relatively simple fabrication requirements. Herein, two-dimensional (2D) metagratings composed of a 2D periodic array of rectangular holes in a metallic medium are proposed for diffraction pattern control. We first present an analytical method for diffraction analysis of 2D compound metallic metagrating (a periodic metallic structure with more than one rectangular hole in each period). Closed-form and analytical expressions are presented for the reflection coefficients of diffracted orders for the first time. Next, we verify the proposed method's results... 

Free-energy calculations are crucial for investigating biomolecular interactions. However, in theoretical studies, the neglect of electronic polarization can reduce predictive capabilities, specifically for free-energy calculations. To effectively mimick polarization, we explore a Charge Switching (CS) model, aiming to narrow the gap between computational and experimental results. The model requires quantum-level partial charge calculations of the molecule in different environments, combined with atomistic MD simulations. Studying three different anti-cancer drug molecules with three different phospholipid membranes, we show that the method significantly improves agreement with available... 

In this paper, we propose a plasmonic structure based on Kretschmann configuration capable of performing various computational tasks, i.e. two dimensional isotropic differentiation, gradient and divergence computation. By means of two polarizers, a non-trivial topological charge can be generated in the transfer function of the structure thereby implementing a two dimensional differentiator. By using only one polarizer, on the other hand, the structure is able to compute either the gradient of the field distribution of a polarized light beam or the divergence of the field of an unpolarized light beam. The performance of the proposed structure in two dimensional differentiation has been... 

Induced Polarization (IP) is a non-intrusive geophysical method to monitor Dense Non-Aqueous Phase Liquid (DNAPL) contamination and remediation processes underground. In this study, an advanced numerical code simulating DNAPL flow and complex electrical resistivity is presented. The model was validated against existing IP results and image measurements that were carried out previously in a series of 2D tank experiment. Multiphase flow modeling in porous media is coupled with electrical current modeling to simulate the process of DNAPL migration and the associated IP response. This brings a broader view of the contamination in space and time compared to surface and borehole measurements,... 

In this paper, a single-fed, circularly-polarized printed antenna with an elliptical slot for S-band application is suggested. The antenna structure includes a circular patch radiator having one rotated elliptical slot which feeds through a microstrip line. The circular polarization is obtained by adjusting the major axis of the elliptical slot. A metallic circular ground and four 80° slices of a wide ring-shaped patch surrounding the main radiator improve impedance matching bandwidth and circular polarization performance. The suggested antenna has a left-handed circularly polarized (LHCP) with an acceptable axial ratio that is in agreement with S-band applications. For verification of the... 

We propose and analyze a circularly polarized slot antenna built on a ferrite substrate which is saturated normal to its plane and metalized on both sides. The antenna is built by etching a circular slot in the top metal layer. The antenna operates in the frequency range where the effective permeability of ferrite is negative. An accurate analytical model is derived for the antenna by solving the integral equation for the electric field on the circular slot. The results obtained are in good agreement with numerical simulations. Using the analytical results, a practical antenna is designed that uses a microstrip feed line. For an antenna with inner and outer radii of 4.9 and 5.9 mm, the... 

Oil polarity is an important property impacting the efficiency of low salinity waterflooding (LSWF). It directly affects fluid/fluid and rock/fluid interactions, controlling the interfacial properties and forces. However, the current findings in the literature on the effect of concentration of polar components on oil recovery by LSWF are contradictory. Therefore, the main objective of this paper is to investigate how the type of non-polar fractions and the concentration of acidic polar oil constituents change the trapped oil saturation at the pore-scale during LSWF. In this regard, we conducted a series of microfluidics LSWF experiments in both secondary and tertiary modes, using clay-free... 

In this study, antibacterial activity, biocompatibility, and corrosion resistance of 316 LVM implants were improved using the development of HAp/GO/Ag nanocomposite coatings by the dip-coating method. The XRD and FTIR results confirmed the synthesis of HAp/GO/Ag nanocomposites. HAp/Ag nanoparticles (68 nm) bound to epoxy, hydroxyl, and carboxyl functional groups on GO sheets (size of GO sheets varies from 255 to 1480 nm) by electrostatic interaction. FESEM images showed that HAp/GO/Ag coatings had higher density and fewer micro-cracks than pure HAp coatings. In addition, HAp/GO/Ag coatings showed optimized nano-hardness (4.5 GPa) and elasticity modulus (123 GPa). The results of... 

Bipolar Plates (BPPs) are the most crucial component of the Polymer Electrolyte Membrane (PEM) fuel cell system. To improve fuel cell stack performance and lifetime, corrosion resistance and Interfacial Contact Resistance (ICR) enhancement are two essential factors for metallic BPPs. One of the most effective methods to achieve this purpose is adding a thin solid film of conductive coating on the surfaces of these plates. In the present study, 410 Stainless Steel (SS) was selected as a metallic bipolar plate. The coating process was performed using titanium nitride and chromium nitride by the Cathodic Arc Evaporation (CAE) method. The main focus of this study was to select the best coating... 

Ca-doped Ni–Mg–Mn spinel ferrites with compositions of Ni0·5Mg0·3Mn0.2CaxFe2-xO4 (x = 0, 0.1, 0.2, 0.3, 0.4, 0.5) were prepared via sol-gel auto-ignition technique. TGA/DTA, FTIR, XRD, FESEM, and VSM were employed to evaluate the thermal, spectral, structural, morphological, and magnetic features of Ca-doped Ni–Mg–Mn spinel ferrites. TGA/DTA curves show the weight loss in the sample. This weight loss was attributed to the oxidation and decomposition of the sample contents at a temperature of 500 °C. XRD reveals a single-phase structure of the Ni–Mg–Mn nano ferrites. A single-phase orthorhombic structure was confirmed for Ca-doped Ni–Mg–Mn ferrites. Structural parameters such as lattice... 

In this work, synthesis of CuIn0.75Ga0.25S2 (CIGS) nanoparticles, the formation of stable dispersion, deposition of high-quality films and, fabrication of thin-film Perovskite solar cells are reported. The stability of nanoparticle ink is crucial in the formation of device-quality films. The chalcogenide-based materials are widely used in thin-film solar cells; in particular, Cu(In,Ga)S2 are used as an absorber and hole transporting layer. In the present study, the nanoparticles of about 20 nm size and bandgap of 1.5 eV are synthesized using a heat-up method. A variety of solvents are used as dispersing media and the stability of the inks is evaluated by precise optical monitoring. We...