Sharif Digital Repository

In the present study, the tri-layer nanofibers were synthesized via triaxial electrospinning process to control the sustained delivery of Doxorubicin (DOX), Paclitaxel (PTX) and 5- fluorouracil (5-FU) anticancer drugs from nanofibers. The 5-FU molecules were incorporated into the core solution (chitosan/polyvinyl alcohol (CS/PVA)) to fabricate the CS/PVA/5-FU inner layer of nanofibers. The intermediate layer was prepared from poly(lactic acid)/chitosan (PLA/CS) nanofibers. The DOX and PTX molecules were initially loaded into the g-C3N4 nanosheets and following were incorporated into the PLA/CS solution to fabricate the outer layer of nanofibers. The synthesized nanosheets and nanofibers were... 

Transdermal drug delivery systems have overcome many limitations of other drug administration routes, such as injection pain and first-pass metabolism following oral route, although transdermal drug delivery systems are limited to drugs with low molecular weight. Hence, new emerging technology allowing high molecular weight drug delivery across the skin—known as ‘microneedles’—has been developed, which creates microchannels that facilitate drug delivery. In this report, drug-loaded degradable conic microneedles are modeled to characterize the degradation rate and drug release profile. Since a lot of data are available for polylactic acid-co-glycolic acid (PLGA) degradation in the literature,... 

Nanofibrous structures mimicking the native extracellular matrix have attracted considerable attention for biomedical applications. The present study aims to design and produce drug-eluting core-shell fibrous scaffolds for wound healing and skin tissue engineering. Aloe vera extracts were encapsulated inside polymer fibers containing chitosan, polycaprolactone, and keratin using the co-axial electrospinning technique. Electron microscopic studies show that continuous and uniform fibers with an average diameter of 209 ± 47 nm were successfully fabricated. The fibers have a core-shell structure with a shell thickness of about 90 nm, as confirmed by transmission electron microscopy. By... 

Organ-on-a-chip technology tries to mimic the complexity of native tissues in vitro. Important progress has recently been made in using this technology to study the gut with and without microbiota. These in vitro models can serve as an alternative to animal models for studying physiology, pathology, and pharmacology. While these models have greater physiological relevance than two-dimensional (2D) cell systems in vitro, endocrine and immunological functions in gut-on-a-chip models are still poorly represented. Furthermore, the construction of complex models, in which different cell types and structures interact, remains a challenge. Generally, gut-on-a-chip models have the potential to... 

In this study, polyaniline nanoparticles (PANI NPs) in emeraldine base (EB) form were prepared by a modified method and characterized by FTIR and UV–vis spectroscopies. The average size of the nanoparticles was 140 nm measured by DLS method. The nanoparticles were embedded into polylactic acid (PLA) nanofibers prepared by electrospinning method. It was found that inclusion of PANI NPs in PLA resulted in reduced diameter of the fibers during the electrospinning process. Also, the surface of nanofibers appeared smooth in FE-SEM images without formation of beads. Improvement in mechanical and electrical properties of PLA/PANI nanofibers over the neat PLA nanofibers implied a good dispersion of... 

Background: Researchers are trying to study the mechanism of neural stem cells (NSCs) differentiation to oligodendrocyte-like cells (OLCs) as well as to enhance the selective differentiation of NSCs to oligodendrocytes. However, the limitation in nerve tissue acces-sibility to isolate the NSCs as well as their differentiation toward oligodendrocytes is still challenging. Purpose: In the present study, a hybrid polycaprolactone (PCL)-gelatin nanofiber scaffold mimicking the native extracellular matrix and axon morphology to direct the differentiation of bone marrow-derived NSCs to OLCs was introduced. Materials and Methods: In order to achieve a sustained release of T3, this factor was... 

This study presents a bilayer structure as a skin scaffold comprised of an electrospun sheet layer made of polycaprolactone and polyvinil alcohol and a porous hydrogel layer made of chitosan and gelatin. The hydrogel layer was fabricated by employing the freeze-gelation technique. The bilayer structure was achieved by pouring the hydrogel solution on the electrospun sheet at the bottom of a mold followed by the freeze-gelation technique to obtain a porous structure in the hydrogel. The hydrogel and hydrogel-electrospun samples were characterized by scanning electron microscopy, swelling, tensile strength, in vitro and in vivo analyses. From a mechanical strength standpoint, the combination... 

Following our previous work on morphology, corrosion resistance and thermal properties of unsaturated polyester (UP)/nanoclay composites, the effect of electron beam (EB) irradiation on mechanical properties of UP/nanoclay composites with various nanoclay contents is investigated in this work. Moreover, influence of EB irradiation with doses of 100, 500 and 1000 kGy on tensile properties and hardness of nanocomposite was examined. FTIR spectroscopy was employed to examine the effect of irradiation on chemical structure of polymer. EB irradiation up to 500 kGy led to the improvement of tensile strength and hardness of the samples. The best mechanical properties were observed for the... 

Commercially available track-etched polyester membranes were used as templates to electrodeposit Co-Ni-Cu/Cu multilayered nanowires, giving room-temperature current perpendicular to plane (CPP) giant magnetoresistance (GMR) values of up to ∼12%. In contrast to similar nanowires electrodeposited in track-etched polycarbonate membranes, the GMR obtained in multilayered nanowires electrodeposited in the polyester membranes increased with decreasing Cu-layer thickness tCu, for tCu in the 2-7 nm range, indicating a lack of ferromagnetic coupling through pinholes, etc. Transmission electron micrographs showed clear evidence for smooth, parallel layer interfaces in the nanowires. © 2006 Elsevier... 

Tailoring the properties of electrospun fibers requires a detailed understanding and control of their microstructure. We investigate the structure/property relationships in fabrics of randomly aligned fibers of polylactide, a prevalent biopolymer, either as-spun or after annealing and solvent-induced crystallization. In-depth characterization by field-emission scanning electron microscope (FESEM), wide-angle X-ray diffraction (WAXD), attenuated total reflection Fourier transform infrared (ATR-FTIR), and modulated temperature differential scanning calorimetry (MT-DSC) reveals that the as-spun fibers comprise crystalline and mesomorphic phases, as well as oriented but mobile amorphous chain... 

The coaxial electrospinning for producing core-shell nanofibers due to control the release profile of drug by the shell layer has been developed. N-carboxymethyl chitosan (CMC)-polyvinyl alcohol (core)/poly(ε-caprolactone) (PCL) (shell) nanofibers were produced via coaxial electrospinning. Doxorubicin (DOX) and nickel ferrite nanoparticles were incorporated into the nanofibers for controlled release of DOX against MCF-7 breast cancer. The minimum CMC/PCL fiber diameter was found to be 300 nm by optimizing of three variables including voltage to distance ratio (1.5–2.5 kV/cm), CMC concentration (4−6 wt.%) and PCL concentration (8−12 wt.%). The synthesized core-shell fibers were characterized... 

The coaxial electrospinning for producing core-shell nanofibers due to control the release profile of drug by the shell layer has been developed. N-carboxymethyl chitosan (CMC)-polyvinyl alcohol (core)/poly(ε-caprolactone) (PCL) (shell) nanofibers were produced via coaxial electrospinning. Doxorubicin (DOX) and nickel ferrite nanoparticles were incorporated into the nanofibers for controlled release of DOX against MCF-7 breast cancer. The minimum CMC/PCL fiber diameter was found to be 300 nm by optimizing of three variables including voltage to distance ratio (1.5–2.5 kV/cm), CMC concentration (4−6 wt.%) and PCL concentration (8−12 wt.%). The synthesized core-shell fibers were characterized... 

In this work, flexible thermoelectric fabrics, polyester/yarn fabrics coated with polyaniline/carbon nanotube (PANI/CNT) nanocomposite, were fabricated by sequential processing: (I) polyaniline/carbon nanotube nanocomposites preparation by a one-step in-situ polymerization and (II) dip coating of a mixture solution of CNT-doped PANI on a polyester/yarn fabric. Nanocomposites were synthesized with various CNT content (0.5, 2.5, 5, and 10 wt%) and characterized using different methods. The Seebeck coefficient and electrical conductivity measurements were used to determine their thermoelectric properties. The results revealed significant improvement in both electrical conductivity and the... 

Fabrication of well-ordered and bio-mimetic scaffolds is one of the most important research lines in tissue engineering. Different techniques have been utilized to achieve this goal, however, each method has its own disadvantages. Recently, melt electrowriting (MEW) as a technique for fabrication of well-organized scaffolds has attracted the researchers’ attention due to simultaneous use of principles of additive manufacturing and electrohydrodynamic phenomena. In previous research studies, polycaprolactone (PCL) has been mostly used in MEW process. PCL is a biocompatible polymer with characteristics that make it easy to fabricate well-arranged structures using MEW device. However, the... 

Incorporating titanium dioxide (TiO2) nanoparticles into the polymeric matrix offers an opportunity to obtain nanocomposites with improved functionality. In this study, the commercial TiO2 nanoparticles (TNP) were surface treated by different concentrations of aminopropyl triethoxy silane (APTS) as a coupling agent and triethylamine (Et3N) as a surface grafting catalyst by an aqueous process to prepare a nanocomposite with superior properties. Fourier transform infrared spectroscopy (FTIR) and thermogravimetric analysis (TGA) were performed to confirm the successful surface modification of TNP. The prepared modified TiO2 nanoparticles (mTNP) with different weight fractions were used as... 

Background: This research follows some investigations through neural tissue engineering, including fabrication, surface treatment, and evaluation of novel self-stimuli conductive biocompatible and degradable nanocomposite scaffolds. Methods: Gelatin as a biobased material and polyvinylidene fluoride (PVDF) as a mechanical, electrical, and piezoelectric improvement agent were co-electrospun. In addition, polyaniline/graphene (PAG) nanoparticles were synthesized and added to gelatin solutions in different percentages to induce electrical conductivity. After obtaining optimum PAG percentage, cold atmospheric plasma (CAP) treatment was applied over the best samples by different plasma variable... 

In this work, flexible thermoelectric fabrics, polyester/yarn fabrics coated with polyaniline/carbon nanotube (PANI/CNT) nanocomposite, were fabricated by sequential processing: (I) polyaniline/carbon nanotube nanocomposites preparation by a one-step in-situ polymerization and (II) dip coating of a mixture solution of CNT-doped PANI on a polyester/yarn fabric. Nanocomposites were synthesized with various CNT content (0.5, 2.5, 5, and 10 wt%) and characterized using different methods. The Seebeck coefficient and electrical conductivity measurements were used to determine their thermoelectric properties. The results revealed significant improvement in both electrical conductivity and the...