Sharif Digital Repository

Packing of cubic particles arises in a variety of problems, ranging from biological materials to colloids and the fabrication of new types of porous materials with controlled morphology. The properties of such packings may also be relevant to problems involving suspensions of cubic zeolites, precipitation of salt crystals during CO2 sequestration in rock, and intrusion of fresh water in aquifers by saline water. Not much is known, however, about the structure and statistical descriptors of such packings. We present a detailed simulation and microstructural characterization of packings of nonoverlapping monodisperse cubic particles, following up on our preliminary results [H. Malmir, Sci.... 

A catalytic membrane reactor was synthesized by coating a 4-5 micron thick Ni/γ-Al2O3 layer on top of a hydrogen selective SiO2/Al2O3 composite membrane using a sol-gel method. Mercury intrusion and BET analysis indicated a uniform size distribution with an average pore size of 285 nm and average surface area of 279 m2 g-1. Single-component permeation tests were carried out for H2, CH4 and CO2 in the temperature range of 650-800 °C and the results showed the same permeance and selectivity values for hydrogen as the composite membrane without a catalytic layer. Performance of the catalytic membrane was evaluated by using as a membrane reactor for the methane steam reforming reaction with a... 

In this study, maleic anhydride grafted polypropylene microporous flat-sheet membranes were prepared via a thermally induced phase separation method with a mixture of dibutyl phthalate and dioctyl phthalate as a diluent. The effects of the polymer composition and coagulation bath temperature on the morphology and performance of the fabricated membranes were investigated. The hydrophilicity results of the membranes demonstrated that membrane modification reduced the water contact angle by about 45°, whereas the pure water flux was enhanced about four times. The antifouling behavior of the fabricated membranes was also investigated in a membrane bioreactor. The results show that the pure water... 

Porous NiTi-shape memory alloy (SMA) is a promising biomaterial with desirable mechanical property and appropriate biocompatibility for human implant manufacturing. In this research, porous NiTi-SMAs have been successfully produced by using thermohydrogen process (THP). This process has capability of production of homogenous structures, appropriate pore-size distributions and short sintering times. The THP-SMA samples produced in this research have a low Young's modulus (19.8 GPa) and a high tensile strength of 255 MPa. These properties are close to those of the natural bone and can meet the mechanical property demands of the hard-tissue implants for heavy load-bearing applications. The... 

Changes of morphological parameters of oil shale under thermal conditions are investigated. Analyses are based on 26 micro-computed tomography (micro-CT) images of Green River immature shale rock available under creative commons license. Several image processing and characterization algorithms are applied to sequential high-resolution micro-CT images of oil shale samples undergoing pyrolysis. Pore-scale morphology is extracted and quantified, providing results for pore size, throat size, grain size, specific surface, coordination number, and fracture aperture. The results demonstrate critical increases of porosity, coordination number and fracture aperture in the temperature range from 390... 

Biocompatible porous polymeric scaffolds provide a suitable environment for proliferation of stem cells in human body. In this research work, porous gelatin–poly(ethylene glycol), PEG, based scaffolds were prepared using combination of freeze-gelation and freeze-extraction methods. Effects of various parameters such as freezing temperature, cross-linking agent, concentrations of gelatin and PEG and their blending ratio on physical and mechanical properties, swelling ratio, porosity, pore size, and degradation rate of scaffolds were investigated. Also, proliferation of fibroblast skin cells on the scaffolds was examined by MTS assay to assess the suitability of the scaffolds in wound healing... 

Petrography and image analysis have been widely used to identify and quantify porous characteristics in carbonate reservoirs. This paper uses the thin section images of 200 carbonate rock samples to predict the absolute permeability using intelligent and empirical methods. For each thin section, several pore network parameters are extracted from thin section images of rocks including the average pore size, average throat size, average throat length and average 2-D coordination number of pore network. A neural-based model successfully predicts the permeability of samples using pore network parameters as the inputs. Second neural network is applied for predicting absolute permeability... 

Starch based scaffolds are considered as promising biomaterials for bone tissue engineering. In this study, a highly porous starch/polyvinyl alcohol (PVA) based nanocomposite scaffold with a gradient pore structure was made by incorporating different bio-additives, including citric acid, cellulose nanofibers, and hydroxyapatite (HA) nanoparticles. The scaffold was prepared by employing unidirectional and cryogenic freeze-casting and subsequently freeze-drying methods. Fourier transform infrared (FTIR) spectroscopy confirmed the cross-linking of starch and PVA molecules through multiple esterification phenomenon in the presence of citric acid as a cross-linking agent. Field emission scanning... 

In the present study, the morphology of asymmetric poly(vinylidene fluoride) blend membranes which were prepared by the phase inversion method is rationalized by comparing two non-dimensional number represent thermodynamic and kinetic properties of the prepared membrane. These two parameters change phase diagram and demixing rate between solvent and nonsolvent. TiO2 nanoparticles and polyvinylpyrrolidone were used as additives. Hansen solubility parameters of the components are calculated by Van Krevelen method. Furthermore, kinetic and thermodynamic properties of the prepared solutions are determined by drawing phase diagrams and controlling mass transfer rate during precipitation of... 

Filtrate and solid invasion from drilling fluids are two key sources of formation damage, and can result in formation permeability impairment. Typically, spurt invasion of mud solids causes the evolution of an external mud cake which tends to reduce further solids and filtrate influx. However, uncontrolled spurt and filtrate invasion are detrimental because they reduce the permeability of the formation. Mud composition, formation rock's permeability and porosity, and temperature can influence both spurt and filtrate invasion. The sizes of mud solids relative to the average pore size of a rock are also important in predicting the extent of mud invasion and permeability impairment. In this... 

A novel combination of discontinuous molecular dynamics and the Langevin equation, together with an intermediate-resolution model of proteins, is used to carry out long (several microsecond) simulations in order to study transport of proteins in nanopores. We simulated single-domain proteins with the α-helical native structure. Both attractive and repulsive interaction potentials between the proteins and the pores' walls are considered. The diffusivity D of the proteins is computed not only under the bulk conditions but also as a function of their "length" (the number of the amino-acid groups), temperature T, pore size, and interaction potentials with the walls. Compared with the... 

In this research, polysulfone (PSf) ultrafiltration (UF) membranes were prepared by a phase inversion method. Surface modification of the PSf membranes was carried out via grafting of acrylic acid as a hydrophilic monomer by free radical graft polymerization initiated by redox reaction. A central composite design (CCD) of response surface methodology (RSM) was applied to design the experiments. The process variables were acrylic acid concentration (CAA), redox system contact time (T1), and acrylic acid polymerization time (T2), while the contact angle (CA), pure water flux (PWF), and flux recovery ratio (FRR) were considered as the responses. Analysis of variance (ANOVA) demonstrated that... 

Novel montmorillonite (Mt) chitosan/poly(vinyl alcohol) (PVA) nanocomposite electrospun nanofibrous membranes (ENM) were prepared and utilized for the treatment of colored wastewater. The Mt. with different mass percentages (0, 1.0, 2.0 and 3.0 mass%) was added to the membrane structure, and its effect on morphology, pore size, porosity, mechanical strength, and permeation properties of ENM were investigated. The fabricated membranes were used as affinity membranes for dye removal with ultrafast permeating adsorption. The results showed that incorporating Mt. as a reinforcing agent improved the nanocomposite ENM resistance to compaction. Young's modulus for the prepared membranes increased... 

Thanks to a wide range of pore sizes by nano/macro composites of SiOC/Al2O3, such composites can serve as different layers of the structure of Packed Bed Reactor Membranes (PBRM). In the present study, the Polymer-Derived Ceramics method (PDC) has been used to synthesize nano/macro structures. Firstly, the effect of toluene as an extra carbon source on structure and microstructure of SiOC glass-ceramics was evaluated, such that, 4% (Vol) toluene was recognized as the proper amount to facilitate the synthesis of β-SiC at 1300 °C proved by XRD, Raman spectroscopy, and HR-TEM. Moreover, the presence of micro/meso-porosities was assessed by BET and TEM, indicating the capability of SiOC to serve... 

In the present study, a bioactive silicate-phosphate glass-ceramic scaffold was fabricated via the polymer-derived ceramics (PDC) method. K2HPO4 phosphate salt was used as the P2O5 precursor in this method. The effect of K2HPO4 wt% and heat treatment temperatures (900–1100 °C) was evaluated. It was observed that although increasing the wt% of K2HPO4 led to the formation of scaffolds with higher densities and strengths, it could also increase the formation of the calcium phase, which could result in improper release behavior of scaffolds. On the other hand, higher heat treatment temperatures enhanced the strength of the scaffolds but eliminated the bioactive octacalcium phosphate (OCP) phase.... 

Systematic delivery of therapeutic agents to specific sites, with a stimulus-responsive drug release profile is currently a rapidly growing area. Mesoporous silica nanoparticles (MSNs) are the useful platforms as drug/gene delivery systems due to their unique properties including the ability to control the pore size, high porosity, and morphology, which can directly affect the mechanism and profile of drug release. The appropriate fabrication strategy can tailor the particle shape and size, leading to enhanced delivery and release mechanisms. The MSN surface can be modified by using either organic or inorganic molecules to induce smart and site-specific drug delivery and release.... 

Activated carbon (AC) is an inert adsorbent material that has widely been used in water treatment or removing of environmental pollutants from water. In order to improve the adsorption of AC, which highly depends on its pore size and surface area, we prepared highly porous adsorbent composites of activated carbon (AC)/chromium-based MOF (MIL-101(Cr)). The composite has a high specific surface area of 2440 m2 g−1 and total pore volume of 1.27 cm3 g−1. To show the efficiency of the composite as an adsorbent, the removal kinetics of anionic dyes (Direct Red 31 and Acid Blue 92) from aqueous solutions dependent on the amount of composite, adsorption time, concentration of dye and pH is... 

Water desalination methods on the basis of newly developed graphene-based membrane have been introduced as a more efficient alternative for the conventional water purification technologies such as classical thermal desalination and reverse osmosis (RO). However, the increase of water permeation rate and ion rejection are still the main subjects in this field. In this study, a new method based on using oscillating electric field is proposed to improve the performance of nanoporous graphene. The effects of the amplitude and oscillation frequency of the electric field and the pore size of the membrane on the water permeation and salt rejection are studied by conducting molecular dynamics... 

In the expanding field of tissue engineering (TE), improvement of biodegradability and osteoconductivity of biomaterials are required. The use of non-toxic reagents during manufacturing processes is also necessary to decrease toxicity and increase cell viability in vivo. Herein, we present a novel approach to prepare hydroxyapatite (HA) nanorods from sea bio-wastes through a green and eco-friendly wet-chemical processing for bone TE. Highly porous natural polymer-ceramic nanocomposites made of HA, gelatin (Ge) and carboxymethyl cellulose (CMC) hydrogels are then introduced. It was found that cross-linking of the hydrogel matrix by glucose as a green reagent affected all characteristics of... 

In this study, a three-dimensional tablet-like porous scaffold, comprising core-shell fibers to host proteins inside the core, was developed. The fabrication method involved the novel combination of coaxial and wet electrospinning in a single setting. Poly (ε-caprolactone) was chosen as the based polymer and bovine serum albumin was used as a model protein. These 3D tablet-like scaffolds exhibited adequate porosity and suitable pore size for cell culture and cell infiltration, in addition to appropriate mechanical properties for cartilage tissue engineering. The effects of different parameters on the behavior of the system have been studied and the 3D scaffold based on the core-shell fiber...