Sharif Digital Repository

A supramolecular linear-dendritic copolymer consisting of a polystyrene backbone and hanging hyperbranched polyglycerols was prepared and characterized. Host-guest interactions between β-cyclodextrin incorporated in the core of polyglycerol as a host and aromatic rings of polystyrene as guests lead to the formation of a supramolecular linear-dendritic copolymer. Supramolecules formed micelles in aqueous solutions which were able to encapsulate and transfer paclitaxel with a high loading capacity  

A new sensor for simultaneous determination of peroxyacetic acid and hydrogen peroxide using silver nanoparticles (Ag-NPs) as a chromogenic reagent is introduced. The silver nanoparticles have the catalytic ability for the decomposition of peroxyacetic acid and hydrogen peroxide; then the decomposition of them induces the degradation of silver nanoparticles. Hence, a remarkable change in the localized surface plasmon resonance absorbance strength could be observed. Spectra-kinetic approach and artificial neural network was applied for the simultaneous determination of peroxyacetic acid and hydrogen peroxide. Linear calibration graphs were obtained in the concentration range of (8.20×10-5 to... 

This study was designed to investigate the effect of changing the location of the center of mass (COM) of transfemoral prostheses on the spatiotemporal and kinematical characteristics of the amputee gait, while maintaining the prosthetic mass fixed. Ten men with unilateral traumatic transfemoral amputation participated in gait analysis, 2-min walk and subject preference tests. Weights were added to the original prosthetic legs in three conditions: 600. g added to the ankle, 600. g added at 10. cm distal to the prosthetic knee, and 300. g added to the ankle, and 300. g at 10. cm distal to the knee. For each prosthetic mass condition, the stride and step lengths, stepping speed, stance, swing... 

Azlactones have been prepared via Erlenmeyer synthesis from aromatic aldehydes and hippuric acid using Fe 2O 3 nanoparticles under ultrasonic irradiation. Short reaction times, easy and quick isolation of the products, and excellent yields are the main advantages of this procedure  

A previous review concluded that postural sway is increased in patients with low back pain (LBP). However, more detailed analysis of the literature shows that postural deficit may be dependent on experimental conditions in which patients with LBP have been assessed. The research question to be answered in this review was: " Is there any difference in postural sway between subjects with and without LBP across several sensory manipulation conditions?" A literature search in Pubmed, Scopus, Embase and PsychInfo was performed followed by hand search and contact with authors. Studies investigating postural sway during bipedal stance without applying external forces in patients with specific and... 

This work focused on the design of new pH-responsive nanoparticles for controlled delivery of anticancer drug doxorubicin (Dox). Nanoparticles of poly(methacrylic acid)-polysorbate 80-grafted starch (PMAA-PS 80-g-St) were synthesized by using a one-pot method that enabled simultaneous grafting of PMAA and PS 80 onto starch and nanoparticle formation in an aqueous medium. The particles were characterized by FTIR, 1H NMR, TEM, DLS, and potentiometric titration. Dox loading and in vitro release from the nanoparticles were investigated. The FTIR and 1H NMR confirmed the chemical composition of the graft terpolymer. The nanoparticles were relatively spherical with narrow size distribution and... 

Automatic extraction of the varying regions of magnetic resonance images is required as a prior step in a diagnostic intelligent system. The sparsest representation and high-dimensional feature are provided based on learned dictionary. The classification is done by employing the technique that computes the reconstruction error locally and non-locally of each pixel. The acquired results from the real and simulated images are superior to the best MRI segmentation method with regard to the stability advantages. In addition, it is segmented exactly through a formula taken from the distance and sparse factors. Also, it is done automatically taking sparse factor in unsupervised clustering methods... 

The Higgs boson was postulated nearly five decades ago within the framework of the standard model of particle physics and has been the subject of numerous searches at accelerators around the world. Its discovery would verify the existence of a complex scalar field thought to give mass to three of the carriers of the electroweak force-the W+, W-, and Z 0 bosons-as well as to the fundamental quarks and leptons. The CMS Collaboration has observed, with a statistical significance of five standard deviations, a new particle produced in proton-proton collisions at the Large Hadron Collider at CERN. The evidence is strongest in the diphoton and four-lepton (electrons and/or muons) final states,... 

To efficiently enhance the contrast obtaining from magnetic resonance imaging (MRI), pharmaceutical grade colloidal dispersions of PEG coated iron-based nanoparticles were prepared and compared to conventional pure iron oxide contrast agent. In this study, we synthesized ∼14 nm iron nanoparticles via NaBH4 reduction of iron(III) chloride in an aqueous medium. The resulting nanoparticles were further oxidized by two different methods via (CH3)3NO oxygen transferring agent and exposure to oxygen flow. XRD and electron microscopy analyses confirmed the formation of a second layer on the surface of α-Fe core. As magnetic measurements and Mössbauer spectra of 4-months post prepared nanoparticles... 

Tubular ceramic membranes were synthesized by depositing a dense layer of silica-alumina on top of a multilayer substrate using co-current chemical vapor deposition (CVD) method. The multilayer substrate was prepared by coating with a series of bohemite sols with certain particle sizes. Cross-sectional and surface images obtained from high resolution FESEM showed that the intermediate layer had a thickness of about 1μm and the top selective layer was uniform and dense with a thickness of less than 100nm. Permeance tests, which were carried out with H 2, CO 2, N 2 and CH 4 at a high temperature range of 923-1073K, indicated that gas permeation took place via different mechanisms through... 

A simple method for synthesising W17O47 nanowires on tungsten oxide thin films deposited by sol-gel method on mica substrate has been reported. After thermally annealing thin films at 700 C in H2 ambient for different durations and subsequently in N2 ambient for 60 min, single-crystalline W17O47 nanowires along h0 01i direction were formed on the surface. Experimental results revealed that annealing under H2 ambient has an important effect on the growth of W17O47 nanowires. According to scanning electron microscopic observations, the synthesised nanowires have ∼70 nm in width and a few microns in length after annealing under H2 ambient for 30min and subsequently under N2 ambient for 60min. A... 

The reaction of thiooxindoles with various 2- and 3-substituted pyridinium salts afforded a variety of functionalized thiazocinoindoles. The products have been prepared in good to excellent yields by regioselective dinucleophilic C/S-cyclocondensation of thiooxindoles with pyridinium salts  

Electroosmosis is the predominant mechanism for flow generation in lab-on-chip devices. Since most biofluids encountered in these devices are considered to be non-Newtonian, it is vital to study the flow characteristics of common non-Newtonian models under electroosmotic body force. In this paper, the hydrodynamically fully developed electroosmotic flow of power-law fluids in rectangular microchannels is analyzed. The electrical potential and momentum equations are numerically solved through a finite difference procedure for a non-uniform grid. A thoroughgoing parametric study reveals that the Poiseuille number is an increasing function of the channel aspect ratio, the zeta potential, the... 

The performance of cellular solids in biomedical applications relies strongly on a detailed understanding of the effects of pore topology on mechanical properties. This study aims at characterizing the failure mechanism of scaffolds based on nodal connectivity (number of struts that meet in joints) and geometry of the pores. Plastic models of scaffolds having the same relative density but different cubic and trigonal unit cells were designed and then fabricated via three dimensional (3-D) printing. Unit cells were repeated in different arrangements in 3-D space. An in-situ imaging technique was utilized to study the progressive deformation of the scaffold models. Different nodal... 

Profile analysis tensiometry (PAT) is presently the most frequently used technique for measuring surface tensions of liquids. The basis of this methodology is however an equilibrium force balance as given by the Gauss-Laplace equation. Therefore, its application under dynamic conditions, i.e. for growing drops or bubbles, is questionable. We discuss the limits of the applicability of PAT under dynamic conditions by using a growing drop configuration equipped with a high speed video camera. The systems studied are the water/air and water/hexane interface. The obtained "dynamic" drop profiles are analyzed by fitting the classical Gauss-Laplace equation. The results are additionally compared... 

Reduced graphene oxide nanoplatelets (rGONPs) were synthesized by sonication of covalently PEGylated GO sheets followed by a chemical reduction using hydrazine and bovine serum albumin. Human mesenchymal stem cells (hMSCs), as a fundamental factor in tissue engineering, were isolated from umbilical cord blood (as a recently proposed source for extracting fresh hMSCs) to investigate, for the first time, the size-dependent cyto- and geno-toxic effects of the rGONPs on the cells. The cell viability test showed significant cell destructions by 1.0 μg/mL rGONPs with average lateral dimensions (ALDs) of 11±4 nm, while the rGO sheets with ALDs of 3.8±0.4 μm could exhibit a significant cytotoxic... 

Open-pore titanium scaffolds were fabricated by sintering of compressed mixtures of TiH1.924 and urea. Spherical and irregular shaped space holders were used to investigate the effect of pore shape on cellular behavior. After removal of the space holder, the shape of the spacers was replicated to the pores. Average diameter of the pores was in the range of 300-600 lm. SEM images showed that titanium hydride resulted in higher surface roughness and larger micro porosities than pure titanium. In vitro evaluationswere carried out by using MTT assay, measuring alkaline phosphatase activity and alizarin red staining in flow perfusion bioreactor for cell culture. Observations revealed excellent... 

To evaluate the selectivity and efficiency of solid phase microextraction (SPME) fiber coatings, synthesized by sol-gel technology, roles of precursors and coating polymers were extensively investigated. An on-line combination of capillary microextraction (CME) technique and high performance liquid chromatography (HPLC) was set up to perform the investigation. Ten different fiber coatings were synthesized in which five of them contained only the precursor and the rests were prepared using both the precursor and coating polymer. All the coatings were chemically bonded to the inner surface of copper tubes, intended to be used as the CME device and already functionalized by self-assembly... 

A method based on solid-phase microextraction (SPME) followed by on-fiber derivatization and gas chromatography-mass spectrometry detection (GC-MS) for determination of phenol in air was developed. Three different types of SPME fibers, polar and non-polar poly(dimethylsiloxane) (PDMS) and polyethylene glycol (PEG) were synthesized using sol-gel technology and their feasibility to the sampling of phenol were investigated. Different derivatization reagents for post on-fiber derivatization of phenol were studied. Important parameters influencing the extraction and derivatization process such as type of fiber coating, type and volume of derivatizing reagent, derivatization time and temperature,... 

Crossflow microfiltration of non-alcoholic beer is investigated numerically and it has been verified by experimental data. Due to the presence of particles with different sizes in feed suspension, a modified combination of three mechanisms of particle back-diffusion is developed to predict particle deposition and cake layer buildup during the process. The simulation results show that smaller particles (about 1μm) are the main contributor to the cake layer due to a minimum in back transport and are the main reason of the flux decline. On the other hand, larger particles (a p>20μm) are swept away along the membrane during the filtration process and move toward the membrane exit due to the...