Sharif Digital Repository

One of the basic assumptions of classical production-inventory models is that all products are of perfect quality. However, in real manufacturing situations, the production of defective items is inevitable, and a fraction of the items produced may be naturally imperfect. In fact, items may be damaged due to production and/or transportation conditions in the manufacturing process. On the other hand, some reworkable items exist among imperfect items that can be made perfect by additional processing. In addition, the classical production-inventory models assume that there is only one product in the system and that there is an unlimited amount of resources. However, in many practical situations,... 

This paper designs a Scenario analysis approach to determine the joint production policy for two products under possible substitution. The Scenario analysis is designed to improve decision-making by considering possible outcomes and their implications. The traditional multi-product production models assume that there is no possible substitution between products. However, in real-world cases, there are many substitutable products where substitution may occur in the event of a product stock-out. The proposed model optimizes production quantities for two products under substitution with the aim of minimizing the total cost of the inventory system, including setup and holding costs, subject to a... 

In this paper, we envision a solution to the problem of capturing an intruder in a product network. This solution is derived based on the assumed existing algorithms for basic member graphs of a graph product. In this problem, a team of cleaner agents are responsible for capturing a hostile intruder in the network. While the agents can move in the network one hop at a time, the intruder is assumed to be arbitrarily fast in a way that it can traverse any number of nodes contiguously as far as no agents reside in those nodes. Here, we consider a version of the problem where each agent can replicate new agents. Hence, the algorithm start with a single agent and new agents are created on demand.... 

Ultra-small and highly dispersive (< 10 nm) iron oxide hydroxide is characterized by some methods. The compound is an efficient and stable catalyst for alcohol oxidation, organic sulfide oxidation, and epoxidation of alkenes in the presence of H2O2. The electrochemical oxygen-evolution reaction of the iron oxide hydroxide is also tested under acidic, neutral, and alkaline conditions. In the presence of the iron oxide hydroxide, excellent conversions (75–100%) and selectivities of substrates (92–97%), depending on the nature of the sulfide, were obtained. Benzylalcohols having electron-donating and-withdrawing substituents in the aromatic ring were oxidized to produce the corresponding... 

A measurement of the forward-backward asymmetry of pairs of oppositely charged leptons (dimuons and dielectrons) produced by the Drell-Yan process in proton-proton collisions is presented. The data sample corresponds to an integrated luminosity of 138 fb−1 collected with the CMS detector at the LHC at a center-of-mass energy of 13 TeV. The asymmetry is measured as a function of lepton pair mass for masses larger than 170 GeV and compared with standard model predictions. An inclusive measurement across both channels and the full mass range yields an asymmetry of 0.612 ± 0.005 (stat) ± 0.007 (syst). As a test of lepton flavor universality, the difference between the dimuon and dielectron... 

In this paper we intend to obtain the economic batch quantity (EBQ) for an imperfect production system in which defective items are produced in each cycle of production. In the litrature of inventory control when the rework is done on defective items it is assumed that the production rate of the rework process is constant and the setup time for rework is ignored. Here we assume that due to the nature of the rework process its production rate is different from the normal production rate and is stochastic. We also assume that after each production run the rework process starts immediately after a non-zero setup time for the rework. Further we assume that the inspection costs during the normal... 

Exploitation of distributed resources spread in diverse enterprises is a new and critical issue in the course of product development cycles. Although the development of IT technology has provided a base for realisation of this paradigm and assisted different CAx agents, such as designers and engineers, to exchange their ideas and design information, but still many CAx software agents are working separately and locally in manufacturing environments and most of the current CAx software suites have been known to be inconvenient for enabling collaboration among manufacturing agents in distributed manufacturing enterprises. The distributed CAx collaboration and data integrity play a major role in... 

Production systems with scrapped and rework items have recently become an interesting subject of research. While most attempts have been focused on finding the optimal production quantity in a simple production system, little work appears on a joint production environment. In this research, two joint production systems in a form of multiproduct single machine with and without rework are studied where shortage is allowed and backordered. For each system, the optimal cycle length, the backordered and production quantities of each product are determined such that the cost function is minimised. Proof of the convexity of the involved objective functions of each model is provided and numerical... 

In today competitive world, productivity or lack of it is a major challenge facing the construction industry. The term "productivity" is defined as the amount of output per unit of input. In order to boost productivity in the construction industry, influencing factors should be recognized and improved. Researchers have identified a myriad of factors affecting construction productivity that can be broadly classified as "external" and "internal" factors. In this paper it has been tried to identify and categorize different factors influencing construction productivity. As a result the intended audience is practitioners in the construction industry and project managers who are eager to improve... 

Let G and H be two graphs. A proper vertex coloring of G is called a dynamic coloring, if for every vertex v with degree at least 2, the neighbors of v receive at least two different colors. The smallest integer k such that G has a dynamic coloring with k colors denoted by χ2(G). We denote the cartesian product of G and H by G□H. In this paper, we prove that if G and H are two graphs and δ(G) ≥ 2, then χ2(G□H) ≤ max(χ2(G),x(H)). We show that for every two natural numbers m and n, m,n ≥ 2, χ2(Pm□Pn) = 4. Also, among other results it is shown that if 3|mn, then χ2(C m□Cn) = 3 and otherwise χ2(C m□Cn) = 4  

The Zagreb indices have been introduced by Gutman and Trinajstić as M1(G) = ∑ v∈V (G) (dG(v))2 and M2(G) = ∑ uv∈E(G) dG(u)dG(v), where dG(u) denotes the degree of vertex u. We now define a new version of Zagreb indices as M1 *(G) = ∑ uv∈E(G) [εG(u) + εG(v)] and M2 * (G) = ∑ uv∈E(G) εG(u)εG(v), where εG(u) is the largest distance between u and any other vertex v of G. The goal of this paper is to further the study of these new topological index  

A measurement of the production cross section ratio σ(χb2(1P))/σ(χb1(1P)) is presented. The χb1(1P) and χb2(1P) bottomonium states, promptly produced in pp collisions at s=8TeV, are detected by the CMS experiment at the CERN LHC through their radiative decays χb1,2(1P)→ϒ(1S)+γ. The emitted photons are measured through their conversion to e+e- pairs, whose reconstruction allows the two states to be resolved. The ϒ(1S) is measured through its decay to two muons. An event sample corresponding to an integrated luminosity of 20.7fb-1 is used to measure the cross section ratio in a phase-space region defined by the photon pseudorapidity, |ηγ|<1.0; the ϒ(1S) rapidity, |yϒ|<1.5; and the ϒ(1S)... 

Ornamental stone sawability is important in predicting the prime cost of production and planning of the stone quarries and factories. Ornamental stone sawability with two standard methods, wire and circular sawing, is dependent on many parameters including; the stone that be sawn and machine characteristics and saw operating characteristic. The investigation of these parameters and the determination of the optimum working conditions for sawing machines in the stone industry is significant for establishing the most suitable and economic usage of the sawing method in the future. Up to now, various attempts have been made to determine these parameters. In this review paper, the important... 

The quantity and quality of scientific output of the topmost 50 countries in the four basic sciences (agricultural & biological sciences, chemistry, mathematics, and physics & astronomy) are studied in the period of the recent 12 years (1996-2007). In order to rank the countries, a novel two-dimensional method is proposed, which is inspired by the H-index and other methods based on quality and quantity measures. The countries data are represented in a "quantity-quality diagram", and partitioned by a conventional statistical algorithm into three clusters, members of which are rather the same in all of the basic sciences. The results offer a new perspective on the global positions of countries... 

The square of a graph G denoted by G2, is the graph with the same vertex set as G and edges linking pairs of vertices at distance at most 2 in G. The chromatic number of the square of the Cartesian product of two cycles was previously determined for some cases. In this paper, we determine the precise value of χ((Cm□Cn)2) for all the remaining cases. We show that for all ordered pairs (m,n) except for (7,11) we have χ(Cm□Cn)2)=γV((Cm□Cn)2)|α((Cm□Cn)2), where α(G) denotes the independent number of G. This settles a conjecture of Sopena and Wu (2010). We also show that the smallest integer k such that χ(Cm□Cn2)≤6 for every m,≥k is 10. This answers a question of Shao and Vesel (2013)  

Software product line (SPL) is an approach used to develop a range of software products with a high degree of similarity. In this approach, a feature model is usually used to keep track of similarities and differences. Over time, as modifications are made to the SPL, inconsistencies with the feature model could arise. The first approach to dealing with these inconsistencies is refactoring. Refactoring consists of small steps which, when accumulated, may lead to large-scale changes in the SPL, resulting in features being added to or eliminated from the SPL. In this paper, we propose a framework for refactoring SPLs, which helps keep SPLs consistent with the feature model. After some... 

Selling correlated products faces the sellers with the cross-selling, which is a key factor in managing revenue and costs of the sellers. Cross-selling is a phenomenon which happens when the demands of products are correlated so that the demand for one of the correlated products automatically initiates demand of another. In these cases, different selling tactics such as bundling, tying, mixed bundling, etc. are applied to sell the items. In this paper, an integrated pricing-inventory model for two complementary products under three selling strategies is developed. In the first model, it is assumed that the seller sells the products separately while those are packed and sold as bundling in... 

Iran has been experiencing slow growth for the past ten years. Using plant-level information, we show that on average firm-specific productivity in manufacturing sectors declined at the rate of 2.6 percent annually, while large top decile firms experienced a modest growth in productivity between 2005 and 2011. We decompose this trend and find that within-plant variation is its main driving force while the between firms and industries component is insignificant. We test several alternative explanations that may contribute to these negative trends. We show that the subsidy reform had a negative effect, while privatization seems to have had no effect. Private management not affected on... 

Selling correlated products faces the sellers with the cross-selling, which is a key factor in managing revenue and costs of the sellers. Cross-selling is a phenomenon which happens when the demands of products are correlated so that the demand for one of the correlated products automatically initiates demand of another. In these cases, different selling tactics such as bundling, tying, mixed bundling, etc. are applied to sell the items. In this paper, an integrated pricing-inventory model for two complementary products under three selling strategies is developed. In the first model, it is assumed that the seller sells the products separately while those are packed and sold as bundling in... 

In this paper we consider a single stage production system in which defective items are produced in each cycle of production. In the litrature of inventory control when the rework is done on defective items it is assumed that the storage space is unlimited and the setup time for rework is ignored. Here we assume that the storage space is limited and due to the nature of the rework process its production rate is different from the normal production rate. We also assume that after each production run the rework process starts immediately after a non-zero setup time for the rework. Further we assume that the unit operation processing cost during the normal production and rework proccessing...