Sharif Digital Repository

Fracture process of fiber-reinforced concrete notched beams is investigated here. Polypropylene macrosynthetic fibers are utilized for reinforcing concrete specimens, and a high-strength mix design is used to produce strong bonds between the embossed polypropylene fibers and the cementitious matrix of beams. Considering different locations for the notch, this study focuses on bridging mechanism under different conditions using both experimental and numerical approaches. First mode of fracture occurs due to opening of crack faces. This mode of failure is simulated by imposing symmetric boundary conditions on middle-notched beams. Inducing the notch with an offset from the middle, mixed-mode... 

In this work, slag based aluminosilicate geopolymer was reinforced with polymeric fibers including, polyester (PES) (waste tire cap plies), polymeric particles including polyethylene terephthalate (PET) (waste water bottle), styrene-butadiene rubber (SBR) (waste tire), and polyvinyl chloride (PVC) (waste water hose). The tensile and compressive strength of the material was evaluated. Taguchi method was employed to assess the influence of the effective parameters on the mechanical characteristics of the geopolymer composite. QUALITEK-4 software was used to create the L32 orthogonal array with 192 (96+96) geopolymer specimens and 32+32 experiments. Analysis of variance (ANOVA) was utilized to... 

Following the idea of using unbonded isolators to eliminate the tensile stress and providing a cost-effective isolation system, recent experimental research has shown ordinary unbonded steel reinforced elastomeric bearings (SREBs) as an attractive option for seismic isolation of highway bridges. The focus of current research work is on the evaluation of the seismic vulnerability of a highway bridge isolated by unbonded SREBs through developing fragility curves of the structure. This assessment considers parameters playing a key role in the isolation system behavior, namely the friction coefficient, as well as the isolator aging effects. In this regard, a typical three-span highway bridge is... 

This study introduces a simple and efficient method to determine the peak floor acceleration (PFA) at different performance levels for three types of plane reinforced concrete (RC) structures: moment-resisting frames (MRFs), infilled–moment-resisting frames (I-MRFs), and wall-frame dual systems (WFDSs). By associating the structural maximum PFA response with the deformation response, the acceleration-sensitive nonstructural components, and the building contents, can be designed to adhere to the performance-based seismic design of the supporting structure. Thus, the proposed method can accompany displacement-based seismic design methods to design acceleration-sensitive nonstructural elements... 

Every year, about a thousand million tires reach the end of their service life, more than half of which are disposed of in landfills. The waste tire rubber has a great potential for application as aggregate phase in production of lightweight concrete/mortar. This study is aimed at evaluating the effects of using crumb rubber (CR) as fine aggregate at replacement ratios of 0–60% (by volume) in alkali-activated slag mortars. Furthermore, polypropylene fibre (PPF) was used at 0.5% and 1% of volume of the mix to enhance the properties of mortar mixes such as flexural strength and shrinkage behaviour. The compressive strength, flexural strength, water absorption, thermal conductivity, drying... 

There are limitations in current medications of articular cartilage injuries. Although injectable bioactive hydrogels are promising options, they have decreased biomechanical performance. Researchers should consider many factors when providing solutions to overcome these challenges. In this study, we created an injectable composite hydrogel from chitosan and human acellular cartilage extracellular matrix (ECM) particles. In order to enhance its mechanical properties, we reinforced this hydrogel with microporous microspheres composed of the same materials as the structural building blocks of the scaffold. Articular cartilage from human donors was decellularized by a combination of physical,... 

In this study, alumina coated steel reinforced geopolymer composites were successfully fabricated and their interfacial and mechanical properties were investigated. The fiber–matrix interface characteristics were assessed using single-fiber push-out and water contact angle experiments as well as SEM-EDS analysis. Finally, the role of alumina coating on the compressive, flexural and toughness of the geopolymer composites was investigated. The morphological studies revealed that alumina coating on steel can chemically bonded and microstructurally integrated with the surrounding matrix. The push-out test showed that the interfacial shear strength was increased approximately 150% in composites... 

This is the first research on the nonlinear frequency analysis of a multi-scale hybrid nanocomposite (MHC) disk (MHCD) resting on an elastic foundation subjected to nonlinear temperature gradient and mechanical loading is investigated. The matrix material is reinforced with carbon nanotubes (CNTs) or carbon fibers (CF) at the nano- or macroscale, respectively. We present a modified Halpin–Tsai model to predict the effective properties of the MHCD. The displacement–strain of nonlinear vibration of multi-scale laminated disk via third-order shear deformation theory (TSDT) and using Von Karman nonlinear shell theory is obtained. Hamilton’s principle is employed to establish the governing... 

In this research, electrically characteristics of a graphene nanoplatelet (GPL)-reinforced composite (GPLRC) microdisk are explored using generalized differential quadrature method. Also, the current microstructure is coupled with a piezoelectric actuator (PIAC). The extended form of Halpin–Tsai micromechanics is used to acquire the elasticity of the structure, whereas the variation of thermal expansion, Poisson’s ratio, and density through the thickness direction is determined by the rule of mixtures. Hamilton’s principle is implemented to establish governing equations and associated boundary conditions of the GPLRC microdisk joint with PIAC. The compatibility conditions are satisfied by... 

Alkali-activated slag (AAS) binder has been recognized as a suitable material for construction applications owing to its low carbon footprint and good mechanical and durability performance. As a promising alternative to the conventional Portland cement binder, it is important to maximize the performance of AAS composites under normal and harsh environmental conditions such as exposure to fire. The use of fibers in a brittle matrix is a well-known approach to enhance the mechanical strength and cracking behavior under thermal loading. In this study, polypropylene fiber (PPF), glass fiber (GF), and basalt fiber (BF) are used at volume fractions of 0.5%, 1%, and 1.5% in AAS mortar mixes. First,... 

Usage of concrete-filled pultruded glass fiber-reinforced polymer (GFRP) tubes (CFPGT) as columns can increase the service life of structures. However, marine structures such as oil platforms are always prone to fire because of the low resistance to the elevated temperatures. The purpose of this investigation is to evaluate the effects of concrete core strength (30 and 60 MPa), and exposure temperature (25, 100, 200, 300, and 400 °C) and time (60 and 120 min) on the compressive and bond behavior of CFPGTs. The properties of unexposed and exposed concrete core, pultruded GFRP hollow tubes, and CFPGTs were determined via compressive and disk-split tests. Also, the push-out test was used to... 

Thermoplastic starch (TPS), as a natural based polymer, is known to have the capability to be used in biological applications due to its biocompatibility and biodegradability. In this study, mechanical properties of TPS are enhanced by incorporating bioactive β-tricalcium phosphate (β-TCP) particles for bone tissue engineering applications. Starch-based nanocomposites containing 3, 5, and 10 wt% of β-TCP nanoparticles (TT3, TT5, TT10) were made using a co-rotating twin-screw extruder. Dynamic light scattering (DLS) and X-ray diffraction (XRD) techniques were employed to analyze the nanocomposites. Moreover, degradability, swelling degree, and biomineralization in a simulated body fluid (SBF)... 

Reliability evaluations play a significant role in engineering applications to ensure the serviceability and safety of advanced structures such as those made of composites. Here, a dynamic reliability evaluation analysis based on the probability density evolution Method (PDEM) has been adapted to assess the reliability of composite structures under uncertainties within the material properties and the external loadings. A Back-Propagation Neural Network approach is employed to identify the system's nonlinear structural response, which is often the case under large deformations. To exemplify, a split Hopkinson pressure bar system was employed to mimic the mechanical behavior of a... 

To improve the biocompatibility and corrosion resistance of 316L SS (Stainless Steel) metal implants, HAp(hydroxyapatite)/TiO2/Al2O3 nanocomposite coating was created using dip sol-gel method sintered at 550 °C. The weight percentage of TiO2+ Al2O3 in these coatings was 20, 30, and 40% wt. In this study, characterization was performed using FTIR (Fourier-Transform Infrared Spectroscopy), XRD, FE-SEM (Field Emission Scanning Electron Microscope), EDS (Energy Dispersive Spectroscopy), DLS (Dynamic Light Scattering), Pull-off, and AFM (Atomic Force Microscopy) analysis. The potentiodynamic polarization and EIS (Electrochemical Impedance Spectroscopy) were performed in the simulated body fluid... 

Reliability evaluations play a significant role in engineering applications to ensure the serviceability and safety of advanced structures such as those made of composites. Here, a dynamic reliability evaluation analysis based on the probability density evolution Method (PDEM) has been adapted to assess the reliability of composite structures under uncertainties within the material properties and the external loadings. A Back-Propagation Neural Network approach is employed to identify the system's nonlinear structural response, which is often the case under large deformations. To exemplify, a split Hopkinson pressure bar system was employed to mimic the mechanical behavior of a... 

To improve the biocompatibility and corrosion resistance of 316L SS (Stainless Steel) metal implants, HAp(hydroxyapatite)/TiO2/Al2O3 nanocomposite coating was created using dip sol-gel method sintered at 550 °C. The weight percentage of TiO2+ Al2O3 in these coatings was 20, 30, and 40% wt. In this study, characterization was performed using FTIR (Fourier-Transform Infrared Spectroscopy), XRD, FE-SEM (Field Emission Scanning Electron Microscope), EDS (Energy Dispersive Spectroscopy), DLS (Dynamic Light Scattering), Pull-off, and AFM (Atomic Force Microscopy) analysis. The potentiodynamic polarization and EIS (Electrochemical Impedance Spectroscopy) were performed in the simulated body fluid... 

This paper focuses on the performance evaluation of several concrete models in reinforced concrete (RC) structures subjected to seismic loading. Despite many studies conducted on implementing different characteristics of concrete in constitutive models, there is an essential need for investigating the ability of these models in predicting the behavior of structures in seismic applications. In this paper, several developed plasticity-based constitutive models with the combination of fracture and continuum damage models are investigated for application in seismic loading conditions. Damage-based isotropic and anisotropic models and smeared cracking approach have been applied as complementary... 

Abstract: The hot deformation behavior of coarse-grained (CG), ultrafine-grained (UFG), and oxide dispersion-strengthened (ODS) AA6063 is experimentally recognized though carrying out compression tests at different temperatures (300–450 °C) and strain rates (0.01–1 s−1). Microstructural studies conducted by TEM and EBSD indicate that dynamic softening mechanisms including dynamic recovery and dynamic recrystallization become operative in all the investigated materials depending on the regime of deformation. Moreover, the high temperature flow behavior is considerably influenced by the initial grain structure and the presence of reinforcement particles. The constitutive and artificial neural... 

In this paper, a comprehensive set of linear and nonlinear ultrasonic techniques was performed to investigate the properties of the interface between the roller-compacted concrete (RCC) layers. The effect of different time intervals between the pouring of each layer, cement content of concrete and bedding mortar, and various curing periods on RCC specimens were studied in this research. In linear methods, the interlayer led to velocity dispersion and attenuation phenomena except for the inherent inhomogeneity of specimens. The nonlinear parameters showed a general upward at the earlier ages, while the linear methods did not show an apparent regularity. The ultimate strength results were then... 

In the present study, the hybrid reinforcements (Fe3O4–SiC) novel composite has been successfully fabricated by powder metallurgy method. Adding Fe3O4 nanoparticles and SiC hybrid reinforcements in the aluminium matrix, improved the magnetic permeability of aluminium matrix composites as well as, thermal properties without mechanical degradation. In this study, the aim was to define the influence of SiC–Fe3O4 nanoparticles on microstructural, thermal, electrical, and magnetic properties of the composite. Based on obtained results, the highest density and hardness is 2.72 g/cm3 and 93 HV respectively. Adding (10–30 wt% SiC) into Al–15Fe3O4 slightly improved the magnetic saturation from...