Sharif Digital Repository

An accurate numerical methodology for capturing the field quantities across the interfaces between material discontinuities, in the context of reproducing kernel particle method (RKPM), is of particular interest. For this purpose the innovative numerical technique, so-called augmented corrected collocation method is introduced; this technique is an extension of the corrected collocation method used for imposing essential boundary conditions (EBCs). The robustness of this methodology is shown by utilizing it to solve two benchmark problems of material discontinuities, namely the problem of circular inhomogeneity with uniform radial eigenstrain, and the problem of interaction between a crack... 

A single-walled nanotube structure embedded in an elastic matrix is simulated by the nonlocal EulerBernoulli, Timoshenko, and higher order beams. The beams are assumed to be elastically supported and attached to continuous lateral and rotational springs to take into account the effects of the surrounding matrix. The discrete equations of motion associated with free transverse vibration of each model are established in the context of the nonlocal continuum mechanics of Eringen using Hamilton's principle and an efficient meshless method. The effects of slenderness ratio of the nanotube, small scale effect parameter, initial axial force and the stiffness of the surrounding matrix on the natural... 

Although the application of nonlinear tools including recurrence quantification analysis (RQA) has increasingly grown in the recent years especially in balance-disordered populations, there have been few studies which determine their measurement properties. Therefore, a methodological study was performed to estimate the intersession and intrasession reliability of some dynamic features provided by RQA for nonlinear analysis of center of pressure (COP) signals recorded during quiet standing in a sample of patients with musculoskeletal disorders (MSDs) including low back pain (LBP), anterior cruciate ligament (ACL) injury and functional ankle instability (FAI). The subjects completed postural... 

The 3D structure of vitamin P, an important bioflavonoid, has been studied in solution by 2D NMR spectroscopy and QM calculations. Rutin, vitamin P, was extracted from Salvia macrosiphon and identified by 1H, 13C, 1H-1H COSY, HMQC, and HMBC spectroscopy. In parallel, density functional theory (DFT) using B3LYP functional and split-valance 6-311G basis set has been used to optimize the structures and conformers of rutin. Also experimental and theoretical methods have been used to correlate the dependencies of 1J, 2J, and 3J involving 1H and 13C on the C5″-C6″ (ω), C6″-O6″ (θ), and C1‴-O6″ () torsion angles in the glycosidic moiety. New Karplus equations are proposed to assist in the... 

Objective: To translate the Foot and Ankle Ability Measure (FAAM) into Persian and to evaluate the psychometric properties of the Persian version of FAAM. Methods: 93 patients with a range of foot and ankle disorders, completed the Persian version of the FAAM and Short-Form 36 Health Survey (SF-36) in the test session. With an interval of 2-6 days, 60 patients filled out the FAAM in the retest session. The FAAM is composed of two subscales including activities of daily living (ADL) and SPORTS. Internal consistency was assessed using Cronbach's alpha, test-retest reliability using intraclass correlation coefficient (ICC) and standard error of measurement (s.e.m.), item internal consistency... 

A carbon paste electrode (CPE) chemically modified with TiO2 nanoparticles and quinizarine (QZ) was used as a selective electrochemical sensor for the simultaneous determination of minor amounts of d-penicillamine (D-PA) and tryptophan (Trp). This modified electrode showed very efficient electrocatalytic activity for anodic oxidation of both d-PA and Trp. Substantial decreases of anodic overpotentials for both compounds made this analysis possible. Results of square wave voltammetry (SWV) using this modified electrode showed two well-resolved anodic waves for the oxidation of d-PA and Trp, which makes the simultaneous determination of both compounds possible. The peak potential for the... 

A micro-SPE technique was developed by fabricating a rather small package including a polypropylene membrane shield containing the appropriate sorbent. The package was used for the extraction of some triazine herbicides from aqueous samples. Solvent desorption was subsequently performed in a microvial and an aliquot of extractant was injected into GC-MS. Various sorbents including aniline-ortho-phenylene diamine copolymer, newly synthesized, polypyrrole, multiwall carbon nanotube, C18 and charcoal were examined as extracting media. Among them, conductive polymers exhibited better performance. Influential parameters including extraction and desorption time, desorption solvent and the ionic... 

STUDY DESIGN.: Cross-sectional validation study to investigate psychometric properties of adapted Persian version of the Scoliosis Research Society-22r (SRS-22r) questionnaire. OBJECTIVES.: To translate the SRS-22r into Persian and to evaluate the internal consistency, reliability, and validity of the Persian SRS-22r. SUMMARY OF BACKGROUND DATA.: The SRS-22r has not been translated and validated for Persian-speaking patients with idiopathic scoliosis. This was to provide a validated instrument to measure health-related quality of life in patients with idiopathic scoliosis in Iran. METHODS.: The translation and cultural adaptation of the original questionnaire were carried out in accordance... 

The aims of this study were to culturally adapt and validate the Persian version of Foot and Ankle Outcome Score (FAOS) and present data on its psychometric properties for patients with different foot and ankle problems. The Persian version of FAOS was developed after a standard forward-backward translation and cultural adaptation process. The sample included 93 patients with foot and ankle disorders who were asked to complete two questionnaires: FAOS and Short-Form 36 Health Survey (SF-36). To determine test-retest reliability, 60 randomly chosen patients completed the FAOS again 2 to 6 days after the first administration. Test-retest reliability and internal consistency were assessed using... 

A carbon paste electrode (CPE) modified with thionine immobilized on multi-walled carbon nanotube (MWCNT), was prepared for simultaneous determination of ascorbic acid (AA) and acetaminophen (AC) in the presence of isoniazid (INZ). The electrochemical response characteristics of the modified electrode toward AA, AC and INZ were investigated by cyclic and differential pulse voltammetry (CV and DPV). The results showed an efficient catalytic role for the electro-oxidation of AA and AC, leading to a remarkable peak resolution (∼303 mV) for two compounds. On the other hand, the presence of INZ, which is considered as important drug interference for AC, does not affect the voltammetric responses... 

A new modified electrode formed by carbon nanoparticle/chitosan film (CNP/CS) was used for electrocatalytic reduction of Niclosamide (NA). The electrochemical behavior of NA at the CNP/CS modified electrode was investigated in detail by the means of cyclic voltammetry. The reduction mechanism of NA, corresponds to the redox chemistry of nitro group, was thoroughly investigated. The effect of the experimental parameters e.g. potential and time of accumulation, pH of the buffered solutions and potential sweep rate on the response of the electrode was studied. The prepared electrode showed high stability and uniformity in the composite film, short response time, good reproducibility and an... 

Several researches have been done to identify visual system characteristics. Some of them are based on the processing of the brain signal recordings. Visual evoked potentials (VEPs) are electrical signals which are produced in response to the visual stimuli and recorded by means of electrodes placed on the head. These signals are usually characterized by the amplitude and latency of their peaks. Different types of visual stimuli and visual system characteristics can affect the shape and hence the characteristics of VEPs. In this paper, proper visual stimuli were used and VEPs were recorded in order to classify visual acuity. To achieve this goal, visual evoked potentials were recorded and... 

ECG denoising has always been an important issue in medical engineering. The purposes of denoising are reducing noise level and improving signal to noise ratio (SNR) without distorting the signal. This paper proposes a method for removing white Gaussian noise from ECG signals. The concepts of singularity and local maxima of the wavelet transform modulus were used for analyzing singularity and reconstructing the ECG signal. Adaptive thresholding was used to remove white Gaussian noise modulus maximum of wavelet transform and then reconstruct the signal  

Abdominal recordings of fetal ECG (fECG) have lower signal-to-noise ratio (SNR) as compared with invasive procedures. In this paper we have combined two previously proposed methods, one for extracting fECG, called piCA and the other, a transformation based on Hilbert transform to enhance the R-peaks. The combination of these methods seems to work well in situations of noisy data and fetal repositioning. Also a comparison is done by using ICA in order to extract the fetal signals. Performance of both methods is studied separately. Results show that applying the transformation on the components extracted with the use of piCA (after maternal ECG cancellation), had a very good performance. Also,... 

Neural activity is very important source for data mining and can be used as a control signal for brain-computer interfaces (BCIs). Particularly, Magnetic signals of neurons are enriched with information about the movement of different part of the body such as wrist movement. In this paper, we use MEG (Magneto encephalography) signals of two subjects recorded during wrist movement task in four directions. Data were prepared for BCI competition 2008 for multiclass classification. Our approach for this classification problem consists of PCA as a noise reduction method, ULDA for feature reduction and various linear classifiers such as Bayesian, KNN and SVM. Final results (58%-62% for subject 1... 

In this work, the inhibitory activity of pyridine N-oxide derivatives against human severe acute respiratory syndrome (SARS) is predicted in terms of quantitative structure-activity relationship (QSAR) models. These models were developed with the aid of multivariate adaptive regression spline (MARS) and adaptive neuro-fuzzy inference system (ANFIS) combined with shuffling cross-validation technique. A shuffling MARS algorithm is utilized to select the most important variables in QSAR modeling and then these variables were used as inputs of ANFIS to predict SARS inhibitory activities of pyridine N-oxide derivatives. A data set of 119 drug-like compounds was coded with over hundred calculated... 

In this study, a low–cost microfluidic device from polymethyl methacrylate was fabricated by laser engraving technique. The device is consisted of a central chip unit with an aligned microchannel. Both sides of the engraved microchannel were sandwiched by two synthesized sheets from polyamide/titania (PA/TiO2) hollow nanofibers as extractive phases. The inlet and outlet of the device were connected to the polyether ether ketone tubes, while a peristaltic pump was used to deliver both sample and desorbing solvent through the microchannel. The recorded scanning electron microscopy images from the surface of the synthesized PA/TiO2 nanofibers, exhibit a good degree of homogeneity and porosity... 

Superhydrophobic materials have attracted many attentions in recent years while their application in sample preparation remained almost intact. In this project, a rough surface of melamine formaldehyde foam was silanized by chemical deposition of trichloromethylsilane to form a highly porous and superhydrophobic material, presumably a suitable medium for extracting non–polar compounds such as benzene and its methyl derivatives. The prepared sorbent was packed in a needle for the headspace needle–trap microextraction of benzene, toluene, ethylbenzene and xylenes (BTEX). Major parameters associated with the extraction/desorption processes were considered for optimization. Under the optimized... 

In recent years, analyzing genome-wide expression profiles to find genetic markers has received much attention as a challenging field of research aiming at unveiling biological mechanisms behind complex disorders. The identification of reliable and reproducible markers has lately been achieved by integrating genome-scale functional relationships and transcriptome datasets, and a number of algorithms have been developed to support this strategy. In this paper, we present a promising and easily applicable tool to accomplish this goal, namely CytoGTA, which is a Cytoscape plug-in that relies on an optimistic game theoretic approach (GTA) for identifying subnetwork markers. Given transcriptomic... 

A method based on direct immersion solid-phase microextraction (DI-SPME) coupled with high performance liquid chromatography combined with post-column photochemically induced fluorimetry derivatization and fluorescence detection (HPLC-PIF-FD) was developed to extract three pyrethroid insecticides, i.e. cyfluthrin, cypermethrin, and flumethrin from water samples. A sol-gel based coating fiber using 3-(trimethoxysilyl propyl) amine as precursor was prepared and used for the extraction of the pyrethroids from groundwater samples. A post-column photochemical reactor was designed and constructed for the derivatization of these environmentally important pollutants to increase their fluorescence...