Sharif Digital Repository

Roll bonding is the most important stage of the accumulative roll bonding process, which is used to produce high strength composites. The presence of a particle layer at the interface alters the bonding condition and increases the threshold reduction for the commencement of bonding. In this study, the bonding mechanism in presence of powder at the interface is analyzed and a theoretical model is proposed to predict the required threshold reduction in warm roll bonding of commercially pure aluminum sheets as a function of amount of alumina particles at the interface. The model considers the rolling parameters and the effect of amount and size of particles by defining some constants, which are... 

In the present study, the roll bonding behaviour of Al-3003/Al-4043 and Al-3003/Zn sheets were compared. The bi-layer sheets were produced by a roll bonding process at different reductions in thickness and rolling temperatures. The joint strengths of the sheets were evaluated by peel and bend testing before and after supplemental annealing treatment. The peeled surfaces were examined using a scanning electron microscope. The results indicated that the Al-3003/Al-4043 sheets were bonded with higher joint strength and lower threshold reductions in thickness with respect to the Al-3003/Zn sheets. In contrast to the Al-3003/Zn sheets, significant improvement was observed in the joint strength of... 

A novel biopolymer-based hydrogel composite was synthesized through chemical crosslinking by graft copolymerization of partially neutralized acrylic acid onto the hydrolyzed collagen. The Taguchi method, a robust experimental design, was employed for the optimization of the synthesis based on the swelling capacity of the hydrogels. This method was applied for the experiments and standard L16 orthogonal array with five factors and four levels. In the synthesis of the composite superabsorbent, N,N′-methylene bisacrylamide (MBA) as crosslinker, ammonium persulfate (APS) as initiator, acrylic acid (AA) as monomer, neutralization percent (NU), and collagen/kaolin weight ratio were used as... 

Industrial dehydrogenation of ethylbenzene to styrene is performed using potassium-promoted iron oxide catalyst. Many attempts have been made to understand the deactivation mechanism of the catalyst based on the chemical differences between the fresh and used catalysts. In the present work, in addition to the effect of chemical changes, the effect of structural changes of the internal areas on the catalyst activity was investigated. A fresh and used commercial catalyst from an industrial reactor which had been continuously used for two years under severe conditions (LHSV = 1 h-1, T = 610 °C, mass ratio of steam to ethylbenzene = 1.2, P = 1.2 atm) was studied. Nitrogen adsorption, Hg... 

The present study examined the sorption capacity and sorption kinetics of four-type perlite for oil spills clean up. These four types are different on their porous space, expansion ability and special surface area. The tests were done both in static and dynamic methods. Experiments showed that the perlite spread on oil spill rapidly and floated on the surface of oil spill because of its low density (80-180 kg/m3). Scanning Electron Micrograph (SEM) of a typical structure of expanded perlite showed that it of high porous space. Sorption kinetic of oil spill into porous expanded perlite was evaluated by weight increase of crude oil with sorption time. According to kinetic study sorption of oil... 

To investigate the Ta/Co/Cu/Co/NiO/Si(100) spin valve structure, fabrication and characterization of the Cu/Co/NiO/Si(100) system was studied for further understanding the structure. The system was grown by employing combinative DC sputtering-evaporation technique. Nickel oxide with a thickness of about 30 nm was deposited on Si(100) substrate using thermal evaporation technique.The cobalt film, then, with a thickness of about 3 nm was grown by DC sputtering under various applied negative bias voltages ranging from 0 to - 80 V. The optimum bias voltage (Vb = -60 V) for the growth of Co layer was determined by atomic force microscopy (AFM), four-point probe sheet measurement (Rs) and scanning... 

Investigation of BSCCO 2223 phase formation in superconducting thin films of Bi-based cuprates deposited on MgO substrate is reported. A series of films were made by in situ dc-magnetron sputtering method and another series were made by ex situ rf-magnetron sputtering technique. Same target have been used in both technique. In the case of the ex situ method, the films were annealed for different period of time at 800°C, and in the case of in situ method, the films were deposited at different temperature substrate. The influence of annealing time and the temperature of the substrate on the quality and the phase formation for ex situ and in situ method have studied, respectively. The results... 

A magnetic polyurethane (PU) nanocomposite was synthesized by an electrospinning technique and applied for isolation and preconcentration of fluoxetine from aquatic and biological samples. The nanocomposite was electrospun using a PU polymer solution containing the dispersed magnetic nanoparticles. The magnetic properties of iron nanoparticles, along with the use of an electrospinning technique, led to the formation of a suitable sorbent toward isolation of fluoxetine. The magnetic PU nanofibers could be subsequently removed from the sample solution by applying a permanent magnet. The scanning electron microscopy (SEM) image of the magnetic PU nanofibers confirms that their diameters are in... 

We present the preparation of polypropylene (PP)/fumed silica (FS) nanocomposites via in situ polymerization in this article. The approach includes preparation and utilization of a bisupported Ziegler-Natta catalytic system in which magnesium ethoxide and FS are used as conjugate supports of the catalyst. Catalyst preparation and polymerization processes are carried out in the slurry phase and under argon atmosphere. Scanning electron microscopy images show a good dispersion of the FS throughout the PP matrix. Results from differential scanning calorimetry reveal that the crystallization temperature of prepared nanocomposites increases by increasing FS loading. Also, crystal content of... 

In this study, we attempt to characterize the microstructural evolution during friction stir butt welding of Al-Cu-laminated composites and its effect on the fracture behavior of the joint. Emphasis is on the material flow and particle distribution in the stir zone. For this purpose, optical microscopy and scanning electron microscopy (SEM) images, energy-dispersive spectroscopy EDS and XRD analyses, hardness measurements, and tensile tests are carried out on the joints. It is shown that intermetallic compounds exist in lamellas of banding structure formed in the advancing side of the welds. In samples welded from the Cu side, the banding structure in the advancing side and the hook... 

The catalytic activity of Pt/Ni/TiO 2 nanotubes electrode toward glucose has been studied. Fabrication of Pt/Ni nanostructures was done in a single-bath solution through electrochemical pulse method by changing the deposition potential between -0.3 and -4 V vs. SCE, respectively. The resulting modified electrode represented high conductivity due to the effective presence of metallic components and uniform surface area caused by dispersion of Pt and Ni nanostructures. The scanning electron microscopy images also confirmed that a large amount of metals colonies were well-dispersed at the edge of the TiO 2 nanotubes. In addition, the Pt/Ni TiO 2 nanotubes modified electrode exhibited an... 

A series of reduced graphene oxide/ZnxCd1-xS (RGO/ZnxCd1-xS) nanocomposites (0 < x < 1) with different ratios of Zn/Cd were synthesized via a facile hydrothermal route under optimized experimental conditions and were carefully characterized by various techniques. Because very little is known about the morphology, specific surface area, and crystal phase effects of RGO/ZnxCd1-xS crystals on their photoresponsivity, field-emission scanning electron microscopy (FE-SEM), BET surface area analysis and X-ray diffraction (XRD) data were studied to investigate their effects on photoactivity. Based on the results, a crystal phase transition from a cubic phase in RGO/Zn0.9Cd0.1S to a hexagonal... 

Alaboratory testing program was conducted to investigate the effects of microstructure on the water retention curve (WRC) and wetting-drying induced volume change in loess. The axis translation and vapor equilibrium techniques were adopted to control suction in the range of 0-400 kPa and 4-140 MPa, respectively. Hysteresis in the WRC of loess was observed for the entire range of suction studied. Compared to re-compacted loess, intact loess exhibits a more pronounced hysteresis in the suction range below 20 kPa, which can be explained by the ink-bottle pore neck effect or constricted pores. The hypothesis is supported by microstructural evidence of mercury intrusion porosimetry and scanning... 

Two non-ionic and hydrophilic surfactant additives, Tetronic-1107 and Triton X-100, were added to poly(vinyl chloride)/NMP polymeric solution to prepare ultrafiltration membranes via immersion precipitation. Surfactants at three different weight percentages up to 6 wt% were added, and the fabricated membranes were characterized and their performance for water treatment in the presence of bovine serum albumin (BSA) as a foulant was assessed. The scanning electron microscopy images indicated remarkable changes in morphology due to higher thermodynamic instability after surfactant addition. The membranes are more porous with more macro-voids in the sub-layer. Plus, the membranes become more... 

A low cytotoxic metal–organic framework (MOF) UiO-66 (UiO stands for University of Oslo) and NH2-UiO-66, that showed high cell viability of HFF-2 via 3-(4, 5-dimethylthiazol-2-yl) 2, 5-diphenyl tetrazolium assay, was reported as an effective adsorbent (antidotal) agents. The structure of MOFs was confirmed by Fourier transform infrared, Field emission scanning electron microscopy (FESEM) and X-ray diffraction. Thermal behavior of MOFs was investigated using with thermogravimetric analyzer in nitrogen atmosphere to check the thermal stability. FESEM showed NH2-UiO-66 displayed symmetrical crystals with triangular base pyramid morphology, with the particle size around 100 nm and uniform size... 

Fabrication of well-defined gold nanowires (GNWs) is of significant importance in many fields such as sensing applications. In this study, the electrodeposition of well-defined GNWs inside polycarbonate (PC) template has been discussed in detail. GNWs were potentiostatically electrodeposited at different filling rates. The growth of GNWs at different stages of pore filling was monitored by electrochemical measurements and field-emission scanning electron microscopy (FE-SEM). It was confirmed that under growth rates between 2.5 and 4 nm/s, GNWs with smooth ends grew uniformly inside the template without any imperfections or corrugations. The length of GNWs was electrochemically controlled to... 

A low cytotoxic metal–organic framework (MOF) UiO-66 (UiO stands for University of Oslo) and NH2-UiO-66, that showed high cell viability of HFF-2 via 3-(4, 5-dimethylthiazol-2-yl) 2, 5-diphenyl tetrazolium assay, was reported as an effective adsorbent (antidotal) agents. The structure of MOFs was confirmed by Fourier transform infrared, Field emission scanning electron microscopy (FESEM) and X-ray diffraction. Thermal behavior of MOFs was investigated using with thermogravimetric analyzer in nitrogen atmosphere to check the thermal stability. FESEM showed NH2-UiO-66 displayed symmetrical crystals with triangular base pyramid morphology, with the particle size around 100 nm and uniform size... 

To fabricate ceramic/metal complex-shaped part by co-powder injection moulding process (2KPIM), it is essential to tailor the sintering parameters in order to gain a low mismatch shrinkage, i.e. high sintering compatibility. In the present work, nanocrystalline 3Y-TZP and commercial 430L MIM grade stainless steel powders were co-sintered at various sintering cycles. Isothermal and non-isothermal sintering behavior of the individual and composite layers in argon and vacuum atmospheres were examined. High resolution scanning electron microscopy (HRSEM) coupled with energy dispersive X-ray (EDX) analysis was used to study the bonding interface between the ceramic and metal joints. It is shown... 

In this research, the effects of preparation conditions, including the coagulation bath temperature, polymer solution composition, preliminary drying time, and thickness of cast polymeric films, on the morphology of ethylene/vinyl acetate copolymer membranes were investigated with scanning electron microscopy and nitrogen gas permeability tests. Flat sheet membranes were prepared through a thermal-wet phase-inversion method. Scanning electron microscopy pictures showed asymmetric structures for some of the membranes. It was also observed that the porosity of the membranes decreased with an increase in the temperature of the coagulation bath and the solvent evaporation period. When the...