Sharif Digital Repository

Nickel-base superalloys such as René 80 are widely used in manufacturing aircraft turbine blades. They are usually coated in order to increase their wear, oxidation, erosion, and hot corrosion properties against environmental degradation. In this article, the mechanical behavior (tensile and low-cycle fatigue (LCF)) of uncoated and aluminide-coated (CODEP-B) René 80 has been studied at 871 °C and 982 °C. Experimental results show that the tensile properties of coated specimens are relatively lower than those of uncoated ones in the same conditions, but application of coating increases the LCF life of René 80 at T = 871 °C, 982 °C, R = (εmin/εmax) = 0, strain rate of 2 × 10-3 s-1, and Δεt =... 

Electrophosphating is the novel method for accelerating the low temperature phosphating bath. This method can be performed as cathodic and anodic treatments. Both of them influence the coating deposition mechanism and therefore coating properties. In this study Zn–Ni electrophosphate coating was applied on galvanized steel using cathodic and anodic electrochemical methods. Microstructure, composition and corrosion resistance of coating were characterized by using a scanning electron microscopy, X-ray diffraction method and potentiodynamic polarization test respectively. The results of this study indicated that, by using cathodic method, compact phosphate coating with high corrosion... 

This work deals with the preparation of epoxy-clay nanocomposites. The results show that the mechanical properties of nanocomposites depend on their compatibility, the epoxy resin used and the purity of the nanoclay. The used bentonite was purified and the effects of the organoclay synthesis and various additives on its characteristics were evaluated. X-ray Diffraction (XRD), X-ray Fluorescence (XRF) and Scanning Electron Microscopy (SEM) were used to analyze the microstructure and the phase composition of the nanoclay. The XRD results revealed that when the modifier addition was increased from 10wt.% to 40 wt.%, the interlayer spacing of the nanoclay increased from 12.43 Å being... 

SiC Ceramic was joined to itself using active brazing alloys, like Ti in shape of sheet filler of Ag-cu and Ti-6AI-4V. This operation occurred in an inert gas furnace. Interfacial microstructure was studied with scanning electron microscopy and X-Ray diffraction. Variation of Electrical Specific Resistance measured by 4 pin astute multimeter and strength of these joints was measured by fracture shear loading. This joint happened at 900°C and upper temperature with 90 minutes and upper time. Electrical specific resistance goes up with the joint in low temperature and time but this variation is very little. The microstructure showed excellent bonding at the interfaces. The data showed also... 

Unsaturated polyester/styrene (UP) resin was filled with nanodiamonds (NDs) containing carboxyl and methacrylate functionalities using mechanical mixing. Field emission SEM exhibited a uniform dispersion of tightly bound aggregates of nanosized spherical NDs with good interfacial interaction. Rheological measurements exhibited a step increment in the shear viscosity of a UP/ND suspension at 0.6 wt% ND resembling a percolation state at this loading. Shear viscosity data supported by dynamic mechanical analysis results suggested the development of effective ND particles in which ND aggregates were covered by only polyester macromolecules. Accordingly, the morphology of UP/ND composites... 

Na0.3WO3 1D nanostructure forms (nanorods and nanobelts) were grown by a solid-liquid-solid mechanism from a 40 nm sputtered tungsten film deposited on a soda-lime substrate and annealed at 700 °C in a tubular furnace in N2 ambient. The morphology, structure, composition and chemical state of the prepared nanostructures were characterized by SEM, XRD, TEM, SAED and XPS measurements. The Na0.3WO3 1D nanostructures were found to have a cubic crystalline structure and grown along the [0 0 1] direction. The nanorods are a few micrometres in length and about 50 nm in diameter. The field-emission application of the prepared samples at different distances between the cathode and the anode was... 

In this investigation a new type of superabsorbent hydrogel based on agar was prepared, and the effect of the feed ratio of some components (acrylic acid, MBA, APS and agar) on the swelling capacity of the hydrogel was systematically studied. Maximum water absorbency of the optimized final product was found to be 1,100∈g/g in distilled water. The structure of the hydrogel was characterized by FT-IR method and morphology of the samples was examined by scanning electron microscopy (SEM). Swelling properties of optimized hydrogel sample in different swelling mediums were investigated. The optimum hydrogel were also loaded with potassium nitrate and its potential for controlled release of... 

In this study two cation coating of calcium and zinc has been developed on stainless steel 316L by electrochemical method. Cathodic current used as an accelerator for phosphating process and the effects of current density on microstructure of the phospahted layer and the time needed for termination of the phosphating process has been evaluated by potential-time, SEM, EDS, etc. Results indicate that higher current densities in electrochemical phosphating will result in heavier phospahted layer with finer crystal size which in turn deteriorates the quality of the layer by its higher porosity. Chemical analysis of the layer reveals that using the electrochemical method for phosphating of... 

Nickel titanium shape memory alloys (NiTi-SMAs) were successfully produced from elemental Ni/Ti powders by powder metallurgical method and then subjected to age treatment. Microstructure was examined by SEM and XRD and phase transformation temperatures were measured by dilatometric method. The phase transformation temperatures increased with both duration and temperature of the age treatment. The porous product exhibited desirable shape memory effect. © 2009 Elsevier B.V. All rights reserved  

Density of surface charges of cellulose fibers and -potential of TiO2 nanoparticles in the solution were measured and controlled by pH. The adsorption and clustering of TiO2 nanoparticles on the surface of cellulose fibers were studied using scanning electron microscopy (SEM) and a scale in different situations of repulsion and attraction between the particles and surface. The experiments show formation of two-dimensional clusters of nanoparticles on the surface. Weight measurement of the adsorbed particles and clusters via the adsorption time results in that there are three stages containing nucleation, two-dimensional growth and saturation for clustering of nanoparticles on the surface.... 

Here, we investigate the influence of elevated temperatures with negligible ambient oxygen on mechanical properties of various embedded glass fiber reinforced polymer (GFRP) profiles, as well as the application of a predictive Bayesian model for predicting these properties. Both the flexural and compressive properties of FRP profiles were investigated through the tests of I-shaped and box-shaped profiles. To determine the impact of low and high elevated temperature, the profiles were exposed to a wide range of temperatures (i.e., 25–550 °C); effects of the exposure time were also investigated. Experiments showed that specimens exposed to higher elevated temperatures for longer time periods... 

The transformation of gibbsite to α-alumina occurs in the range 1100 to 1300°C. The higher the calcination temperature, the larger the crystallites and this leads to abnormal grain growth. The main goal of this research was to reduce the transformation temperature of gibbsite to α-alumina by reducing the gibbsite particles size. The sodium content of the gibbsite used in the study was reduced to less than 0.1% by washing it in HCl solution. It was then ground in a fast mill at ambient conditions for different times then calcined at different temperatures. The microstructure, particles size and thermal behaviour of the samples were examined with SEM, XRD, XRF, PSA and STA, respectively. In a... 

AA7075 alloy is exposed to severe shot peening (SSP) with an Almen intensity of 20A. The microstructure is analyzed via FEGSEM and EBSD microscopy. X-ray diffraction (XRD) analysis is used to evaluate the crystallite size in terms of FWHM measurements. The residual stress measurements show a thicker compressed layer (600 µm) formed by SSP. Microhardness improvements are observed as 30% on topmost surface and releases substantially after 600 µm. Coefficient of friction (COF) of treated material remains higher throughout the sliding distance, however, is reduced particularly in the early stage of sliding distance for the wear load of 20 N. The effect of SSP is vanished particularly at lower... 

The compressive performance of glass fiber reinforced polymer (GFRP) profiles subjected to elevated temperature was investigated through a large number of (3 0 0) tests. The effects of profile cross-sectional area, slenderness, and temperature on the behavior of the GFRP profiles at temperatures ranging from 25 to 400 °C were determined. It was observed that the compressive strength of the GFRP profiles has been decreased by half as the temperature exceeded 90 °C, i.e., close to the glass transition temperature of the matrix. The temperature and ratio of cross-sectional area to external perimeter were determined as two major parameters affecting section capacity. © 2020 Elsevier Ltd  

In this research, for the first time, the effect of air quenching on the microstructural and electrical properties of (In, Nb) co-doped TiO2 was investigated. The FE-SEM images showed that the air quenching has no effect on microstructure of co-doped TiO2. However, air quenching affected the electrical properties so that the dielectric constant in the frequency of 1 kHz at room temperature sharply enhanced from 21*103 to 26*104 and the dielectric loss surprisingly decreased from 0.6 to 0.1. This incredible improvement in the dielectric properties is attributed to the electron-pined defect dipoles which has been activated through air quenching. © 2020 Elsevier B.V  

The effects of Pd addition to Fe (Pd/Fe = 0, 2.5/7.5, 5/5, 7.5/2.5 and 1) and growth temperatures (920 and 970 °C) on density, diameter and growth mode of carbon nanotubes (CNTs) have been studied. SEM observations and TG analyses confirmed that the CNT yields depend on Pd/Fe ratios as (7.5/2.5) > (5/5) > Pd > (2.5/7.5) > Fe at both growth temperatures. TEM data showed that addition of Pd results in tip growth mode. From Raman spectroscopy data, the order of samples' structural quality (I G /I D ratio) are Fe > Pd/Fe (2.5/7.5) > (5/5) > (7.5/2.5) > Pd and the I G /I D ratios increase by decreasing the growth temperature. Films with higher concentration of Fe (Pd/Fe = 0, 2.5/7.5) contain some... 

Rosette-like boehmite nanostructures were prepared successfully via a simple hydrothermal process. The obtained material was characterized with X-ray powder diffractometry (XRD), transmission electron microscopy (TEM) and scanning electron microscopy (SEM). Using Scherrer formula, the average crystallite size of the obtained boehmite rosettes was measured to be about 8 nm. It was shown that boehmite nanopetals with average width of about 41 nm determined by TEM, were formed during the hydrothermal process and then self assembled due to weak hydrogen bonds to fabricate boehmite rosettes. The specific surface area of the obtained rosette-like nanostructures was calculated through BET... 

The mixed nano-ferrites materials Cu0.6Zn0.4HoxFe2−xO4 (0.00 ≤ x ≤ 0.12) were prepared via the sol–gel auto combustion technique. The TGA curve established the annealing temperature (500 °C) for phase formation. The single exothermic peak on the DSC plot occurred at 341 °C temperature. XRD patterns of these nano ferrites verified single phase formation of the FCC cubic structure. The lattice constant a was increased from 8.4244 to 8.4419 Å and then its value decreased to 8.4319 Å. Crystallite size was found in the range of 7 to 16 nm. The surface morphology of the samples was observed from the scanning electron microscope (SEM) images. The grain size was found within the range of 90 nm to... 

The mixed nano-ferrites materials Cu0.6Zn0.4HoxFe2−xO4 (0.00 ≤ x ≤ 0.12) were prepared via the sol–gel auto combustion technique. The TGA curve established the annealing temperature (500 °C) for phase formation. The single exothermic peak on the DSC plot occurred at 341 °C temperature. XRD patterns of these nano ferrites verified single phase formation of the FCC cubic structure. The lattice constant a was increased from 8.4244 to 8.4419 Å and then its value decreased to 8.4319 Å. Crystallite size was found in the range of 7 to 16 nm. The surface morphology of the samples was observed from the scanning electron microscope (SEM) images. The grain size was found within the range of 90 nm to... 

Herein, the effect of electrodeposition time on the super-capacitive performance of three-dimensional (3D) MnO2/g-C3N4 heterostructured electrodes was investigated. MnO2 nanoparticles were electrodeposited on the g-C3N4 nanosheets drop-casted on the Ni foam substrate. The microstructural analysis, carried out by FE-SEM and TEM, confirmed the homogeneous distribution of MnO2 nanoparticles on g-C3N4 nano-sheet layers. The electrochemical capacitive performances of the MnO2/g-C3N4 electrodes were evaluated by cyclic voltammetry (CV), galvanostatic charge/discharge tests, and electrochemical impedance spectra (EIS). The obtained results suggested that the supercapacitor (SC) performance of all...