Sharif Digital Repository

Cobalt is the most common binder in cemented carbides industry. However, there are some interests in use of alternatives. The similarity in properties has made nickel the first choice. In the present work, the effect of initial composition on modern hardmetals containing transition metal carbides/carbonitrides that are called "cemented carbonitrides" with nickel as binder was investigated. Change in quantity of additive carbides and tungsten to carbon (C/W) weight ratio through applying metallic tungsten powder in primary powder mixture had some effects on final hardness, transverse rupture strength, and microstructure of studied alloys. Addition of vanadium carbide not more than 0.2 wt.%,... 

The main purpose of this study is to prepare and characterize hydroxyapatite (HA)-10%wt bioglass (BG) composite nanopowders and its bioactivity. Composites of hydroxyapatite with synthesized bioglass are prepared at various temperatures. Suitable calcination temperature is chosen by evaluating of the phase composition. X-ray diffraction (XRD), Transmission electron microscopy (TEM) and Scanning electron microscopy (SEM) techniques are utilized to characterize the prepared nanopowders. The bioactivity of the prepared composite samples is evaluated in an in vitro study by immersion of samples in simulated body fluid (SBF) for predicted time. Fourier transformed infrared (FTIR) spectroscopy and... 

Considerable researches have been focused on zinc-iron (Zn-Fe) alloy coatings due to their superior characteristics among zinc alloy electrodeposits in recent years. The corrosion behavior of these coatings depends on the phase structure and morphology of the Zn-Fe deposits. In this work the effects of pulse plating variables such as current density, off-time, frequency and pulse modes on the morphology and phase structure of Zn-Fe deposits was studied by scanning electron microscopy (SEM), X-ray diffraction (XRD) and energy dispersive spectrometry (EDS) analysis. The corrosion behavior of these coatings was measured by means of polarization curves and Neutral salt spray tests. It was shown... 

In the present research the aging behavior of Al6061 alloy and Al6061/SiCp composite fabricated by powder metallurgy method was investigated. The solution treatment of the samples were carried out at 527°C for 2, 3and 4 h followed by aging at 180°C for different aging times between 1 and 10 h. The existence of SiC particles led to increasing the peak hardness of the composite. The peak hardness of the composite took place at shorter times than that of the 6061 alloy for the samples solution treated for 3and 4 h, but took place at longer times for the samples solution treated for 2 h. The optimum solution treating time was about 3 h for both the composite and the 6061 alloy that led to the... 

The current study was carried out to investigate the kinetics of reactions for the pressure oxidative leaching of a molybdenite concentrate in less than one hour. The effects of oxygen pressure, stirring speed, pulp density, acid concentration and temperature on the leaching rate of the molybdenum were studied. It was found that about 85% of molybdenite was oxidized to molybdic oxide precipitate with remaining molybdenum dissolved in the leaching liquor. Analysis of experimental data showed that the reaction is chemically controlled with activation energy of 68.8 kJ/mol. Furthermore SEM images showed no significant boundary diffusion layer and it was noted that the molybdic oxide... 

Recent investigations show that ceramic/ceramic joints have high potential for applications in industry. Cost and difficulty in manufacturing complex components, either in one step or by joining of ceramic-metal and ceramic-ceramic, have inhibited more widespread use. It is important to know how to join components without problems and to understand the role of the interface as the main factor controlling the properties in these joints. The purpose of this paper was to investigate the joining of two ceramics with metal fillers (SiC to SiC and Al2O3 to Al2O3) and to investigate the interface of SiC/SiC and Al2O3/Al 2O3 with the same metal interlayer (Ag-Cu-Ti) and the effects on the... 

A simple method for synthesis of W17O47 nanothick plates by annealing sol-gel-deposited tungsten oxide thin films on soda lime substrate has been reported. After heat treatment of the dried thin films at 700 °C in N2 ambient for 60 min, W17O47 nanothick plates with [100] orientation were obtained. The synthesized product was characterized and analyzed by, X-ray diffraction (XRD), SEM, XPS and ultraviolet-visible spectrophotometery. According to SEM observations, nanothick plates grew with random orientations on the surface. In addition, it was observed that some of the nanothick plates were constituted from several nanosheets. XRD analysis determined that the nanothick plates were mainly... 

Decreasing particle size results in larger increase of external surface area and shorter diffusion path, both reducing mass and heat transfer resistances in catalysis and sorption. A rapid high-temperature hydrothermal synthesis method was developed to synthesize uniform nanoparticles of SAPO-34 zeolite with high crystallinity. To investigate the effects of temperature and synthesis time on purity and crystallinity of the final products, the crystallization temperature was increased from 468 to 673 K while the synthesis time was decreased from 24 h to 45 min. The products were characterized by XRD and SEM techniques. It was found that high temperature and short synthesis time reduce the... 

MCM-41 nanoparticles were prepared by in situ assembly of inorganic precursors and CTAB. The structure of nanoparticles was characterized by XRD, TEM, particle size analysis, N2 adsorption techniques. The surface modification of particles in order to perfect dispersion in polysulfone (PSf) matrix was performed by dimethyldichlorosilane (DMDCS) and aminopropyltrimethoxysilane (APTMS) as new modification agents. Thermal gravimetric analysis (TGA), differential scanning calorimetry (DSC) and SEM analysis were applied to investigate thermal stability, glass transition temperature and quality of distribution of particle in the nanocomposite membrane, respectively. The PDMS was used to coat the... 

Since ultraviolet (UV) irradiation cannot be applied for a long time in practical applications, it is necessary to develop a narrow band gap photocatalyst to decompose environmental pollutants under visible irradiation. In this research, (WO3)x-(TiO2)1-x nano-porous layers were fabricated by micro arc oxidation (MAO) and influence of the electrical current type on their physical and chemical properties was investigated. Morphological studies, performed by SEM technique, revealed that pore size and roughness decreased with the frequency and increased with the duty cycle. The pulse-grown layers had a finer structure when compared to those fabricated under direct current. XRD and XPS results... 

Two kinds of carbon coated and uncoated 316L stainless steel are studied to use as bipolar plates in fuel cells. The results show that the conductive amorphous carbon film has a low corrosion rate in simulated PEMFC environment. Rather long term potentiostatic tests and SEM investigations indicate that carbon thin films can be a good candidate to use as bipolar plate  

Al2O3-SiC composite ceramics were prepared by pressureless sintering with and without the addition of MgO, TiO2 and Y2O3 as sintering aids. The effects of these compositional variables on final density and hardness were investigated. In the present article at first α-Al2O3 and β-SiC nano powders have been synthesized by sol-gel method separately by using AlCl 3, TEOS and saccharose as precursors. Pressureless sintering was carried out in nitrogen atmosphere at 1600 °C and 1630 °C. The addition of 5 vol.% SiC to Al2O3 hindered densification. In contrast, the addition of nano MgO and nano TiO2 to Al 2O3-5 vol.% SiC composites improved densification but Y2O3 did not have positive effect on... 

In the present study, the roll bonding behaviour of Al-3003/Al-4043 and Al-3003/Zn sheets were compared. The bi-layer sheets were produced by a roll bonding process at different reductions in thickness and rolling temperatures. The joint strengths of the sheets were evaluated by peel and bend testing before and after supplemental annealing treatment. The peeled surfaces were examined using a scanning electron microscope. The results indicated that the Al-3003/Al-4043 sheets were bonded with higher joint strength and lower threshold reductions in thickness with respect to the Al-3003/Zn sheets. In contrast to the Al-3003/Zn sheets, significant improvement was observed in the joint strength of... 

Al-1100/St-12 aluminum clad steel sheets were produced using roll bonding process at different reductions in thickness and with various supplemental annealing treatments. Experiments were conducted by applying the Taguchi method to obtain optimum condition for maximizing the joint strength. The joint strengths of the bi-layer sheets were evaluated by peel test. The Al/Fe intermetallic phases at the joint interface and the peeled surfaces were examined using scanning electron microscopy (SEM). Energy dispersive spectroscopy (EDS) and Vickers microhardness test were performed to characterize the intermetallic compounds. The results indicate that at the optimum condition of 0.50 reduction in... 

Highly active unsupported MoO3 and Co -MoO3 catalysts were prepared by a simple solution reaction method in the presence of different organic additives. Catalysts were characterized by the XRD, BET surface area measurement, SEM and TEM techniques. Results suggested that utilizing different additives produced different morphologies OfMoO3 microstructures. Optimizing reaction conditions was found to produce more active molybdenum oxide nanoparticles when urea and PEG200 additives were utilized. XRD and TEM results indicated crystal growth restriction after cobalt incorporation. Catalytic activities of prepared materials were evaluated in the hydrodesulfurization reaction of Naphtha. Products... 

In this research, it is shown that the production of bimetallic Al/Cu rod by cold ECAE process is feasible. The mechanism of the cold weld between the copper sheath and aluminum core is assessed using the characteristics of the mating surfaces both theoretically and by examining the SEM micrographs of the peeled surfaces. It is shown that the stretch produced by the shear strain in the process leads to the fracture of the work-hardened layer of the mating surfaces and then by extruding the virgin metal through the cavities of the cracks a cold weld is developed between the sheath and core of the rod. To achieve the cold weld, a threshold surface stretch of about 59% is required. It is shown... 

V2O5-TiO2 nanostructured porous layers were grown through micro arc oxidation of titanium in vanadate containing electrolytes. This study sheds light on the effect of the electric current type on the photocatalytic performance of the layers. Surface morphology of the layers was investigated by SEM. The results revealed a porous structure with a pores size of 30-180 nm depending on the frequency and the duty cycle. A uniform porous structure was obtained under the pulse-DC regime. Topographical investigations revealed a rough surface which is favorable for catalytic applications. Our XRD and XPS results showed that the layers consisted of anatase, rutile, and vanadium oxide phases whose... 

Cadmium sulfide (CdS) nanowires and nanorods with different aspect ratios were successfully synthesized by the solvothermal method aided with various solvents, namely ethylenediamine, ethanolamine and triethylene tetraamine. X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR) analyses revealed that, highly pure CdS nanostructures were crystallized with different structures and preferable growth orientations depending on solvent nature. Field emission electron microscope (FE-SEM) images showed that the aspect ratio of CdS nanostructures depends upon the dielectric constant and boiling temperature of solvents. CdS nanostructures with the highest aspect ratio in the form... 

In the present study, titanium nano-particles have been synthesized using chemical vapor condensation (CVC) process. Reaction of sodium and titanium tetrachloride vapors in the tube furnace resulted in the production of titanium nano-particles that were encapsulated in sodium chloride. Dried Argon gas was employed as a carrying agent. Titanium nano-particles were contained in an ethanol bath. Transmission Electron Microscopy (TEM), Scanning Electron Microscopy (SEM) and X-ray Diffraction (XRD) were employed for analysis and characterization of nano-particles. The size of primary particles was smaller than 100 nm and secondary particles were submicron agglomerations  

Binary blends of recycled high-density polyethylene (R-HDPE) with poly(ethylene terephthalate) (R-PET) and recycled polystyrene (R-PS), as well as the ternary blends, i.e. R-HDPE/R-PET/R-PS, with varying amounts of the constituents were prepared by twin screw extruder. The mechanical, rheological, thermal, and scanning electron microscopy (SEM) analyses were utilized to characterize the samples. The results revealed that both R-HDPE/R-PET and R-HDPE/R-PS blends show phase inversion but at different compositions. The R-PET was found to have much higher influence on the properties enhancement of the R-HDPE compared to R-PS, but at the phase inverted situation, a significant loss in the tensile...