Sharif Digital Repository

Adsorption isotherms of H2S, CO2, and CH4 on the Si-CHA zeolite were measured over pressure range of 0-190 kPa and temperatures of 298, 323, and 348 K. Acid gases adsorption isotherms on this type of zeolite are reported for the first time. The isotherms follow a typical Type-I shape according to the Brunauer classification. Both Langmuir and Toth isotherms describe well the adsorption isotherms of methane and acid gases over the experimental conditions tested. At room temperature and pressure of 100 kPa, the amount of CO2 adsorption for Si-CHA zeolite is 29 % greater than that reported elsewhere (van den Bergh et al. J Mem Sci 316:35-45 (2008); Surf Sci Catal 170:1021-1027 (2007)) for the... 

Bio-inspired Human Serum Albumin (HSA) imprinted polydopamine nano-layer was produced through oxidative polymerization of dopamine on the pore surface of HSA modified porous silica particles. The coating thickness was controlled by the reaction time and thereby varied within 0-12. nm. The samples were characterized by elemental analysis, FT-IR, DSC, SEM, TEM, TGA, physisorption and thermoporometry. The characterization confirmed the success of evolution and deposition of polydopamine layer on the silica pore surface. Batch rebinding experiment showed that the molecularly imprinted polymer (MIP) with 8.7. nm coating thickness, in comparison with the thinner and thicker coatings, displays the... 

A novel silica-functionalized dual Brønsted acidic ionic liquid (ionic liquid with two Brønsted acidic species) has been reported as a highly efficient catalyst for thioacetalization of carbonyl compounds. The reaction was efficiently performed in water as an environmentally benign solvent with good to high yields. Thermal gravimetric analysis showed that the catalyst is stable at least up to 350 C. Furthermore, the catalyst can be recycled and reused for six runs of reaction without appreciable loss of activity. The structure of the catalyst is modelized to gain more realistic structural insight about the functionalized ionic liquid  

Finesmigration is a noticeable problem in petroleum-production engineering. Plugging of throats in porous media occurs because of detachment of fine particles from sand surfaces. Thus, the study of interactions between fines and pore surfaces and the investigation of governing forces are important factors to consider when describing the mechanism of the fines-release process. The main types of these forces are electric double-layer repulsion (DLR) and London-van der Waals attraction (LVA). It may be possible to alter these forces with nanoparticles (NPs) as surface coatings. In comparison with repulsion forces, NPs increase the effect of attraction forces. In this paper, we present new... 

An efficient heterogeneous palladium catalyst system has been developed based on immobilization of Pd nanoparticles on silica-bonded N-propylpiperazine (SBNPP) substrate. SBNPP substrate can stabilize the Pd nanoparticles effectively so that it can improve their stability against aggregation. Also, grafted piperazine species onto the silica backbone prevents the removing of Pd nanoparticles from the substrate surface. It seems that the high recyclable capability of Pd-SBNPP catalysts is resulted from these two characteristics. Transmission electron microscopy (TEM) of catalyst is shown the size of Pd nanoparticles in Pd-SBNPP average of 20 nm. Furthermore, X-ray photoelectron spectroscopy... 

In this study, 1,4-diazabicy lo[2.2.2] octane (DABCO) tribromide was immobilized on silica support by using 3-chloro propyl trimethoxy silane to obtain a silica-supported DABCO tribromide reagent. The synthesized reagent was characterized with elemental analysis, FT-IR spectroscopy, and thermo-gravimetric analysis (TGA). This reagent has been applied in the conversion of alcohol to corresponding carbonyl compounds. Alcohol oxidation reactions yield in 52-95%, and the reagent may be recycled five times with further bromine treatment  

We developed a modified straightforward method for the fabrication of uniformly sized silica-coated magnetite clusters core/shell type nanocomposite particles. Proposed simple one-step processing method permits quick production of materials in high yield. The structural, surface, and magnetic characteristics of the nanocomposite particles were investigated by transmission electron microscopy (TEM), scanning electron microscope (SEM), powder X-ray diffraction (XRD), vibrating sample magnetometer (VSM), and Fourier-transform infrared (FTIR). The sphere-shaped particles almost have the average diameter of 120 nm, with a magnetic cluster core of 80 ± 15 nm, and a silica shell of 25 ± 10 nm... 

The use of polymer flooding as one of enhanced oil recovery methods has recently increased. The occurrence of high shear rates in reservoir and near well bore through perforation nozzles during polymer flooding cause shear degradation of polymers and therefore polymer viscosity has decreased. Rheological behavior of polymer solution in different conditions of oil reservoir is one of the key factors to develop use of polymer solutions. A few researches are available regarding improving rheological behavior of polymeric solution. In this study, to investigate the effect of nanoparticles on rheological behavior of polymer solutions two samples were prepared: polyacrylamide solution in water and... 

The relatively new applications of superabsorbent polymers (SAPs) in cement based materials call for investigations regarding their behaviors in relation to other constituents in the system. Colloidal silica nanoparticles (CS) are becoming increasingly important for the improvement of strength and durability of cement based materials. In this study, a poly (AA-co-AM) SAP was synthesized by free radical polymerization, and its behaviors in cement based composites incorporating CS were investigated. These included swelling behavior, setting time, mechanical performance in different curing conditions, and rheological properties of fresh pastes. The observation of an unusual reduction in... 

Three strategies were employed for the assembly of gold nanoparticles on silica-coated magnetite particles (SCMPs). In strategy I, citrate-coated gold nanoparticles were attached on the surface of amine-SCMPs. In strategy II, amine-SCMPs were coated with carboxylated gold nanoparticles via amide bond formation. In strategy III, the thiol-SCMPs surface was coated with gold nanoparticles. Among the above examined strategies, coating amine-SCMPs with gold nanoparticles via strategy I resulted in a better coverage and stronger intensity of absorption bands. Furthermore, results obtained through strategy I showed that decreasing the pH of the solution from 7 to 3 leads to a further red-shift of... 

Gold nanoparticles are widely used as high efficient photon-thermal energy converters in a broad range of applications. This paper presents a theoretical investigation on using the optothermal properties of gold nanoparticle arrays to generate nanoscale molten and rubbery regions on the surface of an amorphous polymeric film. Nanoparticles are assumed to be embedded in a transparent silica layer and illuminated with a 7.5 ns pulsed laser at 532 nm. Simulation results are presented for systems with single gold nanoparticles, dimers and chains. Both electromagnetic and thermal interaction between nanoparticles are found to be important factors in determining the result of surface processing.... 

Self-Compacting concrete (SCC) is identified as a high performance concrete with the ability of self compaction, using its own weight without any external vibration. SCC is able to fill congested area and voids, even in highly reinforced concrete members whilst it flows without segregation. The fresh properties of SCC such as workability can be determined using different tests including slump-flow, J ring, V-funnel, U box, L box, GTM and column technique. In this paper the effect of different amount of cementitious material, silica fume and W/C ratios on workability and compressive strength of SCC are investigated. The results indicate that the workability of mixtures is reduced by... 

In this study, a two-layer feed-forward neural network was constructed and applied to determine a mapping associating mix design and testing factors of cement-nano silica (NS)-rice husk ash ternary blended concrete samples with their performance in conductance to the water absorption properties. To generate data for the neural network model (NNM), a total of 174 field cores from 58 different mixes at three ages were tested in the laboratory for each of percentage, velocity and coefficient of water absorption and mix volumetric properties. The significant factors (six items) that affect the permeability properties of ternary blended concrete were identified by experimental studies which were:... 

Tubular ceramic membranes were synthesized by depositing a dense layer of silica-alumina on top of a multilayer substrate using co-current chemical vapor deposition (CVD) method. The multilayer substrate was prepared by coating with a series of bohemite sols with certain particle sizes. Cross-sectional and surface images obtained from high resolution FESEM showed that the intermediate layer had a thickness of about 1μm and the top selective layer was uniform and dense with a thickness of less than 100nm. Permeance tests, which were carried out with H 2, CO 2, N 2 and CH 4 at a high temperature range of 923-1073K, indicated that gas permeation took place via different mechanisms through... 

In this study, a hybrid of silica nanosphere/multiwall carbon nanotube (MWCNT) has been synthesized by wet chemical method at room temperature. The effect of MWCNTs, silica nanospheres and hybrid nanostructures (80% silica nanosphere/20% MWCNT and 50% silica nanosphere/50% MWCNT) on the thermal conductivity of distilled water has been investigated. SDBS was used as the dispersant to stabilize nanomaterials in the aqueous suspension and its concentration was 1.5 times of the concentration of nanomaterials. As results show, by increasing the concentration of nanomaterials, effective thermal conductivity of nanofluids increased. The most and the least enhancement in the effective thermal... 

A novel mesoporous MCM-41 with remarkable wide channel diameters and thick walls was synthesized. The procedure involved the acid-catalyzed hydrolysis of tetraetheylorthosilicate (TEOS) in a water/ethanol/isopropoanol solvent mixture while employing 1-hexadecylamine as a templating agent and mesitylene as an auxiliary agent. After removal of the template by either extraction or calcination at 560 °C, the resulting mesoporous materials had surface areas of 1,289 and 1,210 m2/g.The channel diameterswere found to be 46.8-51.2 Å ,while thewall thicknesses were 20.9-21.1 Å. X-ray powder diffraction proved that the synthesized mesoporous structure belongs to MCM-41 family. Notably, they displayed... 

The current study is aimed at comparison of adsorption behaviors of silica-supported Cu nanoparticles (Si-N-Cu) and micrometric copper powder (Mi-Cu) for uptake of iodine vapor. The Si-N-Cu was synthesized by the decomposition of aqueous Cu(NO3)2 solution at supercritical condition, followed by reduction of the sample by H 2-N2 mixture. The Si-N-Cu sample with 29.4 nm Cu particles adsorbed 95% of I2 at partial pressure 10-5 bar in 1 h, while the 1 μm Mi-Cu adsorbed 51% of iodine in 6 h, indicating higher yield and faster kinetics of the nanometric sample. Theoretical analysis revealed the existence of a strong thermodynamic size effect in the Cu-I2 reaction system, so that molar |ΔG| for 2... 

Optothermal properties of noble metal nanoparticles can be used in a wide range of applications. This paper presents the results of a theoretical study on the utilization of laser-induced heating of a gold nanoparticle (GNP) to melt a region of a transparent material with sub-wavelength spatial resolution. The considered system consists of a 10 or 15nm diameter GNP fixed inside a silica substrate. The silica surface is covered with a thick film of the transparent polymeric or crystalline material. The heating and melting processes are studied under a 7.5ns pulsed laser illumination. Calculations are conducted under three temperature limits, on the maximum temperature of the free electrons,... 

Adsorption of Cr (VI) from aqueous solution was studied using a continuous fixed bed column which is packed with a new micro-porous composite particle developed in this study. This composite particle is composed of silica porous particle in which acrylamide is polymerized within the pore regions of the silica particles. The composite particle was supposed to maintain the mechanical properties of polyacrylamide as efficient absorbent to serve appropriately in the continuous processes. In order to enhance the adsorption capacity of the composite particle, it was modified with ethylenediamine. Scanning electron microscopy (SEM), Fourier transforms infrared spectroscopy (FT-IR) and... 

Ultrahigh-molecular-weight polyethylene (UHMWPE)/fumed silica nanocomposites were prepared via in situ polymerization using a bi-supported Ziegler-Natta catalytic system. Nanocomposites with different nanoparticle weight fractions were produced in order to investigate the effect of fumed silica on thermal and mechanical properties of UHMWPE/fumed silica nanocomposites. The viscosity average molecular weight (M) of all samples including pure UHMWPE as the reference sample and nanocomposites were measured. Scanning electron microscope (SEM) images showed the homogenous dispersion of nanoparticles throughout the UHMWPE matrix while no nanoparticle cluster has been formed. Crystallization...