Sharif Digital Repository

The goal of this research is the simulation of the annular combustion chamber of the turbine engine utilized by liquid fuel. The achievement to this goal will lead to create numerical tools for parametric study, analysis and combustion chamber designing.For this reason simple geometry has been considered. This simplicity of geometry causes to facilitate in parametric study and decrease in saving time for modeling and meshing. This combustion chamber is a simplified model of engine CF6. In recent study, the k – ε realizable model has been used for turbulence modeling. For non-adiabatic condition, chemical reaction is dissolved by utilizing probability density function along with laminar... 

Upscaling is an important step in hydrocarbon reservoir modeling which reduces the number of grid blocks of high detailed geological models to prepare them for flow simulation. This helps to speed up computational process, to keep the simulation (CPU) time within a reasonable range and to make future engineering analysis (history matching, comparison of production scenarios, Monte Carlo simulation and etc.) possible. The accuracy of post processing analysis heavily depends on the robustness and validation of the applied upscaling method. Although numerous methods have been proposed in the literature, overemphasizing the effect of scale on the behavior of complex governing equations has... 

On average there are to resistance spot welding connections per vehicle. The quality of these welding directly affects the quality of the finished product and the strength of the vehicle against various loads, including road roughness, different maneuvers and even sudden impacts from accidents. During the spot welding process, unintentional failures occur due to the wrong choice of current, force and time. The aim of this study is to investigate the fatigue strength of three-sheets welding joints in numerical and laboratory methods, considering the defects of (Undersize weld, Stick, edge of sheet metal and Edge of sheet metal-SECANT) . For this purpose, a healthy spot welding model was first... 

In this work, a model was presented for an MCFC fuel cell with internal reforming and combustion chamber. The model consists of mass and heat transfer equations beside the chemical and electrochemical reaction rate equations. Velocity distribution due to reactions and temperature distribution along the cell is considered. The model has been simulated in steady state form using finite difference method in MATLAB package environment accompanied by the analysis of the dynamic behavior of cell using method of lines in Simulink environment. Simulation results have been validated with experimental data extracted from literature. The last part of the work concerns with sensitivity analysis of some... 

By far, the most expensive part of the production optimization process is the evaluation of the objective function because this requires computationally expensive reservoir simulations to be performed.One way to reduce this high computational cost isby using surrogates or proxies for the reservoir simulator. There are different methods for constructing a surrogate that their aims are mimicking the reservoir behavior with high accuracy and low computational cost. In reservoir engineering surrogate modeling has been used for the problem of well placement optimization,while in the context of production optimization it has not yet been investigated in the literature. Moreover, most of surrogate... 

In this thesis, dynamic behavior of the Iran’s power grid has been analyzed and inter-area oscillations of this grid have been studied. Important results of this thesis are inter-area oscillation modes characteristics, regions and coherent generators and tie-lines in expose of high amplitude oscillations. These results could be used in different applications. It is time consuming and complicated to apply complete model for dynamic analyzing, therefore in most of researches an equivalent dynamic model should be prepared. First step for constructing this grid is identifying coherent generators. There are different methods to identify coherent ones, but it is not possible to apply all of them... 

Zinc-bromine redox flow batteries are promising for large-scale energy storage applications due to their high energy density and open-circuit voltage. Proposed models for predicting these batteries' performance are limited due to challenges such as zinc deposition during the charging step and the utilization of a complexing agent. In this study, a 2D dynamic model was developed to investigate the battery performance. The kinetic equations for half-reactions are considered according to their two-step electron transfer mechanism. The model predictions were validated against experimental data reported in the literature for different current densities. Afterward, effects of various operating... 

Bone scaffolds are combinations of several materials, for achieving suitable properties and usage for replacing with defected bone. In this study, TCP/Agarose scaffolds are fabricated by two different approaches. The first one is using polymer sponge and gel casting technique and the other one is using foaming agent in order to obtain scaffolds with same porosity. The results show that in spite of same structure and porosity, scaffolds have different mechanical properties due to their different morphologies. Compressive strength of the scaffolds which were fabricated using polymer sponge method is 2.25MPa and elastic modulus is 56.8MPa. After coating with Agarose, compressive strength... 

Hazardous Noxious Substances (HNS) are chemicals. Due to population increase and as a result, increased demand, HNS transportation by sea has been raised. Gasoline and diesel are two kinds of HNS which have the largest transported amount via northern ports of Iran especially Anzali port. So, HNS spill from tankers is an imminent event and threat for environment of Caspian Sea. Organizations that are concern about the health of coasts and seas water always try to use the softwares to simulate the currents and waves to define the hydrocarbon slick transport. Therfore in this study, a 2D hydrodynamic/oil spill model has been developed to predict the transportation of diesel and gasoline slick... 

Carbonate Matrix acidizing in order to improve or increase initial permeability, leads to different dissolution patterns under different operating and environmental conditions. In a specific rock / reactive fluid system, when a reactive fluid injects into the system in an optimal velocity, the dissolution pattern proceeds like a finger, names Wormhole. Formation of Wormhole is known as a success in acidizing process, because of its optimum porosity and permeability evolution and minimum pore volume injected of reactive fluid to breakthrough. So prediction of optimum injection velocity and analysis of dissolution patterns variation by change in operational and environmental conditions,... 

This thesis proposes a probabilistic framework for evaluating and enhancing the community recovery process following an earthquake occurrence. This framework serves as a recovery decision support tool, aiming to enhance community resilience through the optimal allocation of limited available resources following a disaster occurrence. To this end, Bayesian network and agent-based simulation are integrated, each of which forming one of the modules of the proposed framework. The first module, namely, the Bayesian network, leads to situational awareness of the status of the community after the earthquake by fusing data from various sources. The data, such as the earthquake event characteristics... 

Inability of endothelial cells in responding to metabolic needs (endothelial dysfunction,) is a sign of heart diseases like atherosclerosis and vascular stenosis. Recently, a new method using finger PPG signal has been proposed to determine endothelial function in response to reactive hypertension (RH.) PPG-based endothelial function assessment results are not fully correlated with ultrasound FMD tests, and this is because of some auto-regulation phenomena in the fingertip. It is expected that such problems will not exist in larger arteries, like the radial artery. The goal of this project is to acquire the PPG signal from the radial artery as it is proportional to blood volume changes in... 

In this project, the behavior of single strand DNA (ssDNA) that is end-tethred to surface (surface is covered with an layer of mercaptohexane ) through the Monte Carlo simulation has been investigated. To understand this behavior, a ssDNA has been studied through freely jointed chain (FJC) model with electrostatic, base paring, and base-pair stacking interaction. The concentration of sodium chloride salt in solution is 1 mM and the applied surface potential is -1.5 - +0.25 V. Computational results show that the ssDNA chain can have the following configurations: 1) “very closed”, 2) “closed”, and 3) “open” that considering the amount of energy, the mentioned configurations can be compared... 

Nowadays more than half of the world’s population lived in urban areas. That proportion is set to rise to 67% by 2050. This will cause urban mobility with serious problems. The concept of Urban Air Mobility (UAM) is proposed to avoid the problem to become a catastrophy. Due to environmental issues and also high operating costs, using copters as an air-taxi was not justifiable. As the technology in e-VTOL flourished, the desire of using of these vehicles in such a transportation system was increased. In this paper, besides previous investigations, the e-VTOL’s performance parameters’ influence on the characteristic of a civil air-taxi network is under investigation. In addition, this paper... 

Reduction ships resistance is the major issues that always been about moving the ship into a water. In the course of research, many scientists have been interest to resistance reduction. It is important protect the body of ship against damage caused by sticking marine algae and crustaceans as protection against corrosive agents. Marine organisms such as algae, crustaceans and bacteria stick on submerged surfaces and increase the ship resistance. In this thesis resistance reduction using coating is evaluated. Foul release paint make smooth surface and low surface energy therefore ship with foul release coating experience lower drag contrast ship with another coating in the unfouled condition.... 

In the building, can be used variaty of Heating, Ventilating and Air conditioning systems. Among the items that affect to select the hvac system can be pointed to building thermal demand and system energy consumpsion. simulation of this systems is one of the ways that can compare hvac systems in the building. according to Iran needs for preparation of software for optimization of energy carriers consumption in building proportional with existing matrials and equipment in the country, in this research has been tried methodology and modeling of hvac systems in the way developed that producted software is capable simply and practical for engineers be operational in a residential unit. In realy... 

Due to the world's reliance on fossil fuels, the climate change situation has become more severe and has presented major challenges. One of the most promising growth avenues to address these issues in the medium to long term is widespread electrification based on renewable sources. However, this is only feasible if the energy infrastructure can support distributed and renewable energy sources without affecting the performance of the power grid. A grid is also necessary for energy systems in order to connect various technologies and guarantee proper integration of supply and demand for maximum efficiency. A novel idea called Energy Internet (EI) has been put forth to accomplish these goals,... 

This study consists of two parts: steady state calculations and neutron noise calculations in the frequency domain for two rectangular and hexagonal geometries. In the steady state calculation, the neutron diffusion and its adjoint equations are approximated by two-dimensional coordinates in two-group energy and are solved using the average current nodal expansion method. Then, by considering the node size in the dimensions of a fuel assembly, different orders of flux expansion are investigated. For verification purposes, the calculations have been performed by power iteration method for two test problems of BIBLIS-2D and IAEA-2D. For rectangular geometry with increasing flux expansion order... 

Microbial fuel cell is one of the new technologies in the field of power generation from the organic energy resource. The fuel cell system in a process similar to chemical fuel cell generate electrical energy through oxidation of organic composition by uses of electrogenic microorganisms as biocatalyst. In this study the main object is providing a comprehensive mathematical model for the fuel cell system in micro-liter size. To achieve this purpose, we start to investigate properties of fuel cell system in this size. And according to the geometry of system we choose chemotactic equation for estimating hydrodynamic behavior of microorganism and using combination of conductive base and... 

The high consumption of worldwide fossil energy and its detrimental effects on the environment and climate have prompted a transition toward renewable energy sources. The availability of renewable energy sources depends on weather and seasonal changes; therefore, an imbalance between supply and demand would be unavoidable. Hydrogen storage as an energy carrier, can fulfill this energy mismatch. Storing hydrogen in underground formations, such as aquifers, has been the subject of extensive research recently. In these storage reservoirs, hydrogen contacts the resident brine which will be lost through the dissolution-diffusion mechanism. Therefore, successful design of these storages requires...