Sharif Digital Repository

The structural, electrical, optical, and photovoltaic properties of aggregated submicron nitrogen-doped TiO2 particles (NTiO2) and the influence of utilizing them, in comparison with undoped ones, as the light-scattering layer of dye-sensitized solar cells were investigated. Field emission scanning electron microscope, X-ray diffraction, and diffuse reflectance spectra showed that both type samples have similar morphology, crystal phase, and scattering feature. Moreover, photoluminescence, Mott–Schottkey, and photovoltaic characteristics such as IMPS/IMVS and charge extraction analysis indicated that the NTiO2 layer is an efficient scatterer in two aspects: enhancement of light-harvesting... 

Solar collecting area is one of the most important operating parameters of active solar stills. No experimental work has been performed to investigate the effect of this parameter to date. Furthermore in all of previous theoretical studies the effect of solar collecting area was examined during only the first 24-hour period of the operation of stills with one specified brine depth. However the present work experimentally studies the long-term simultaneous effects of collector area and brine depth on the performance of active solar stills. For this purpose four parallel active solar stills with different collector areas were fabricated and experiments were conducted for 5 consecutive days... 

A comparative study has been made of hybrid solar cells based on poly(3-hexylthiophene) (P3HT) and different nano-structures of TiO2. Electrospinning, which is a low cost production method for large area nanofibrous films, was employed to fabricate TiO2 nanofibers and spin coating method was employed to fabricate organic-inorganic hybrid solar cells based on P3HT and TiO2 nanostructures. The performance of the hybrid solar cells was analyzed for four density levels of the TiO2 nanostructure. It was found that higher densities of TiO2 leads to more interface area and generates excitons, so that the power conversion efficiency increases to... 

Colloidal quantum dot solar cells have recently attracted significant attention due to their low-processing cost and surging photovoltaic performance. In this paper, a novel, reproducible, and simple solution-based process based on supercritical fluid toluene is presented for in situ growth and deposition PbS nanocrystals with oleic-acid passivation. A lead precursor containing sulfur was mixed with oleic acid in toluene and processed in a supercritical fluid condition at different temperatures of 140, 270 and 330 °C for 20 min. The quantum dots were deposited on a fluorine-doped tin oxide glass substrate inside the supercritical reactor. Transmission electron microscopy, X-ray diffraction,... 

Recently, hybrid graphene–quantum dot systems have attracted increasing attention for the next-generation optoelectronic devices such as ultrafast photo-detectors and solar energy harvesting. In this paper, a novel, one-step, reproducible, and solution-processed method is introduced to prepare hybrid graphene–PbS colloids by employing supercritical ethanol. In the hybrid nanocomposite, PbS quantum dots (~3 nm) are decorated on the reduced graphene oxide (rGO) nanosheets (~1 nm thickness and less than 1 micron lengths). By employing X-ray photoelectron and Raman and infrared spectroscopy techniques, it is shown that the rGO nanosheets are bonded to PbS nanocrystals through carboxylic bonds.... 

In this paper the creation of multiple energy hubs that make up a complex energy network are modeled and optimized for a selection of six scenarios to examine both their financial viability and potential reduction of greenhouse gas emissions. As a proposed case study scenario for the model, three energy hubs are considered: a 'residential complex (RC)', a 'commercial shopping plaza (CS)', and a 'school (S)'. The use of combined heat and power systems, solar photovoltaic, solar collectors and network interaction are also examined for their impact on efficiency and cost. The modeling is undertaken and carried out by General Algebraic Modeling System (GAMS). It is shown that cost can be reduced... 

Today, regarding the limitation and environmental side effects of fossil fuel resources, solar hydrogen production is one of the main interests in the energy research area. The development of visible light sensitized semiconductors based on non-toxic components, low cost and available bio-species is an ongoing approach for H2 generation based on water splitting reactions. Here, two different morphologies of TiO2 photoanodes, nanoparticulated and nanotubular, have been modified with simply extracted bacteriorhodopsin (bR) without any linker. Achieving a significant enhancement in photoconversion efficiency of TiO2 photoanodes, η% was increased from 2.9 to 16.5 by bR addition to the TiO2... 

Solar energy exists extensively in all parts of the world. However the intermittency of solar energy presents critical challenges to PV system. The intermittency can be covered by storing solar energy in chemical bonds such as hydrogen. This process can be performed by photovoltaic powered electrolysis of water. The energy transfer efficiency between PV and electrolyzer is subject to the distance between maximum power points (MPP) of PV module and operating points. The operating points can be adjusted by optimizing the design parameters of the electrolyzer but the maximum power points are function of PV module characteristics, solar radiation and ambient temperature. Therefore the weather... 

In this paper, special focus is paid to the long-term adoption of renewable electricity technologies and their implications for emissions reductions in Iran. MESSAGE, as a bottom-up energy supply optimization model, is used to assess the lowest-cost technology options. The potential impacts of transitioning to a renewable electricity supply are quantified, and the investment requirement to achieve a low-carbon generation mix is estimated. Alternative scenarios are defined to evaluate the impact of fossil fuel prices, the carbon tax and government incentives on the utilization of renewable resources, national renewable targets, and emissions reductions. The prioritization of non-hydro... 

In this work, the effect of the number of stages on the productivity of a multi-effect active solar still was experimentally investigated for the first time. Moreover, system performances in continuous and non-continuous modes were compared. For this purpose, indoor experiments were conducted on 4 similar solar still devices with different stages (1-4 stages) in order to accurately control the environmental conditions. In addition, water production was hourly measured during the whole 24-h experiment. The results show that with increased number of stages, distillate production can be predicted with a quadratic function. Moreover, adding a maximum of 6 and 10 additional stages can... 

Abstract We design a thermo-photovoltaic Tandem cell which produces high open circuit voltage (Voc) that causes to increase efficiency (η). The currently used materials (AlAsSb-InGaSb/InAsSb) have thermo-photovoltaic (TPV) property which can be a p-n junction of a solar cell, but they have low bandgap energy which is the reason for lower open circuit voltage. In this paper, in the bottom cell of the Tandem, there is 30 quantum wells which increase absorption coefficients and quantum efficiency (QE) that causes to increase current. By increasing the current of the bottom cell, the top cell thickness must be increased because the top cell and the bottom cell should have the same current. In... 

Direct steam generation (DSG) in parabolic trough collectors causes an increase to competitiveness of solar thermal power plants (STPP) by substitution of oil with direct steam generation that results in lower investment and operating costs. In this study the integrated solar combined cycle system with DSG technology is introduced and techno-economic assessment of this plant is reported compared with two conventional cases. Three considered cases are: an integrated solar combined cycle system with DSG technology (ISCCS-DSG), a solar electric generating system (SEGS), and an integrated solar combined cycle system with HTF (heat transfer fluid) technology (ISCCS-HTF).This study shows that... 

We report on fabrication of halide perovskite solar cells using a two-step spin-spray coating rout. The applied method is one of the most straight forward procedures for fabricating uniform stoichiometry and crystalline perovskite cells. To fabricate a high quality perovskite layer, various concentrations of methyl-ammonium iodide (CH3NH3I) were sprayed on a spin coated PbI2 layer using a simple airbrush gun. The characterization results indicate that the size of cuboid perovskite morphology depends on the concentration of methylammonium iodide in the spray procedure. The photovoltaic performance of the fabricated solar cells has been measured and a high dependency on the cuboid sizes was... 

The plasmonic effects of infiltrated silver (Ag) nanoparticles, with different contents, inside a nanostructured TiO2 film on the photovoltaic performance of dye-sensitized solar cells (DSSCs) are explored. The synthesized Ag nanoparticles are immobilized onto deposited TiO2 nanoparticles by a new strategy using 3-mercaptopropionic acid (MPA), a bifunctional linker molecule. Transmission electron microscope (TEM) images show that monodispersed Ag and polydispersed TiO2 nanoparticles have an average diameter of 12 ± 3 nm and 5 ± 1 nm, respectively. Moreover, Fourier transform infrared spectroscopy (FTIR) analysis reveals that Ag nanoparticles were successfully functionalized and capped with... 

Solution-processed quantum dots (QDs) have attracted significant attention for the low-cost fabrication of optoelectronic devices. Here, we synthesized PbS QDs via hot injection method and passivated the trap states by using short thiols and dopant elements for photovoltaic application. In order to study the effect of dopants on photovoltaic application, PbS QDs were doped by using three different cations: Cadmium, Calcium, and Zinc. We utilized Time resolvel Photoluminescence measurement to study the carriers lifetime for different samples and found that the carriers life time increases ∼80% by using Cd as a dopant compared with undoped sample. In addition, the results of J-V measurement... 

In order to achieve the international climate goals and to keep the global temperature increase below 2 °C, carbon capture and storage in large point sources of CO2 emissions has received considerable attention. In recent years, mitigation of CO2 emissions from the power sector has been studied extensively whereas other industrial point source emitters such as hydrogen industry have also great potential for CO2 abatement. This study aims to draw an updated comparison between different hydrogen and power cogeneration systems using natural gas and coal as feedstock. The goal is to show the relative advantage of cogeneration systems with respect to CO2 emission reduction costs. Accordingly, the... 

In dye-sensitized solar cells recombination reactions at the TiO2 photoanode with the electrolyte interface plays a critical role in cell efficiency. Recombination of injected electrons in the TiO2 with acceptors in the electrolyte usually occurs on uncovered areas of TiO2 surfaces. In this work, we report electropolymerization of polymer films on nanoporous TiO2 electrode surfaces using an ionic liquid as the growth medium. The choice of ionic liquid as the growth medium for this study is based on the insolubility of dye N719 in this electrolyte, thus avoiding dye molecule detachment from the TiO2 photoanode surface over the entire potential range investigated during the... 

The application of the renewable energy sources, especially solar energy, for thermal enhanced oil recovery methods as an economical and environmental valuable technique has received many attractions recently. Concentrated Solar Power systems are capable of producing substantial quantities of steam by means of focused sunlight as the heat source for steam generation. This paper aims to investigate viability of using this innovative technology in fractured reservoirs to generate steam instead of using conventional steam generators. A synthetic fractured reservoir with properties similar to those of giant carbonate oil reserves in the Middle East was designed by using commercial thermal... 

Herein, we demonstrate a facile low temperature chemical bath deposition approach to deposit a light scattering layer on a nanostructured mesoporous TiO2 bottom layer in a dye-sensitized solar cell architecture. Large TiO2 nanoparticles were formed on the top surface of photoanode electrodes via hydrolysis of TiCl4 at 70 °C. We controlled the size and agglomeration of these TiO2 nanoparticles by altering the concentration of TiCl4 in the chemical bath during the hydrolysis process. Electron microscope images revealed that mono-dispersed scattering particles having uneven surfaces with diameters between 100 to 300 nm formed on the mesoporous titania layer. The scattering behavior of the... 

The performance of the tower based concentrated solar thermal (CST-tower) plant is very sensitive to the operation strategy of the plant and the incident heat flux on the receiver. To date, most studies have been examined only the design mode characteristics of the cavity receivers, but this paper significantly expands the literature by considering non-design operating conditions of this important sub-component of the CST-tower plants. A feasible non-design operating conditions of the cavity receivers that was considered in this study is the storage mode of operation. Two practical dynamic control strategies were examined then to find the most efficient approach: fixed solar field mass...