Sharif Digital Repository

One of the efficient solar energy harvesting technics is the parabolic trough concentrated solar power plant. However, if the concentrated solar power plant were not equipped with a storage system, the power plant capacity factor would be deficient. Latent thermal energy storage system using phase change material (PCM) is a high energy density storage system to provide durable energy with a constant temperature. In this study, first, a dynamic analysis is performed implementing TRNSYS software on the parabolic trough concentrated solar power plant located in Shiraz, Iran. Consequently, this system is assisted by the latent thermal energy storage system to improve its performance and capacity... 

Solar pond is a type of solar collector that stores solar energy in the form of heat. The solar pond can be used as a low-temperature heat source for electricity generation. In this paper, to find the most suitable power cycle for power generation from the solar pond, the performance of the Organic Rankine Cycle (ORC), Trilateral Flash Cycle (TFC) and their modified forms with an open feed liquid heater and an internal heat exchanger for different working fluids was investigated. Water was considered as the heat transfer fluid which transfers the stored heat from the solar pond to the working fluid of the cycle. The results indicate that in all cases, the energy and exergy efficiency of the... 

Extraction of thermal heat from a salinity-gradient solar pond (SGSP) as a way of accumulating solar energy, stockpiling and taking merit of it for medium and low temperature demands is presented as an interesting topic in recent decades. This reliable supply of heat can be used for low-temperature refrigeration systems to yield cooling load for residential applications. For this purpose, theoretical investigation of ejector refrigeration cycle (ERC) driven by a SGSP is carried out to produce cooling output. Also, thermoelectric generator (TEG) is used as a potential device replacing condenser of the ERC for the sake of bolstering performance of the fundamental system by producing power,... 

Using hybrid energy storage system is a method for increasing the storage capability of solar thermal energy. If multiple energy storage devices with complementary performance characteristics are used together, the resulting system will be a 'Hybrid Energy Storage System'. In other words, a Hybrid Energy Storage System (HESS) has several media available for storage at any time. In this way, increase in storable energy is obtained without increasing collectors' area. When there are more than one storage mediums, the system should be able to choose the best medium for storing energy according to the conditions. In the previous works, an optimizer program was used to find the proper medium... 

A huge amount of energy consumption, the cost of this usage and environmental effects have become serious issues for commercial cloud providers. Solar energy is a promising clean energy source, to provide some portion of the Internet data center's (IDC's) energy usage which can reduce environmental effects and total energy costs. Moreover, due to the high energy consumption of the cooling system, considering cooling power in job scheduling can provide efficient solutions to reduce total energy consumption. In this article, we investigate the problem of minimizing the energy cost of an IDC and propose an algorithm which schedules heterogeneous IDC workloads, by considering available renewable... 

Herein, we report the impact of light scattering mechanism on photovoltaic and photoelectrochemical performance of dye-sensitized solar cell (DSC) devices composed of TiO2 nanoparticles and hollow cubes. DSCs are designed by two different light scattering modes (i.e., mode I in form of single layer electrode containing nanoparticles and hollow cubes and mode II in the form of double layer electrode comprising active and scattering layers made of nanoparticles and mixtures of nanoparticles and hollow cubes, respectively). The synthesized anatase-TiO2 hollow cubes (200–400 nm) and nanoparticles (15–30 nm) are employed to enhance the optical length and light harvesting of photoanodes,... 

Recent advancements in photovoltaic (PV) system technologies have decreased their investment cost and enabled the construction of large PV farms for bulk power generations. The output power of PV farms is affected by both failure of composed components and solar radiation variability. These two factors cause the output power of PV farms be random and different from that of conventional units. Therefore, suitable models and methods should be developed to assess different aspects of PV farms integration into power systems, particularly from the system reliability viewpoint. In this context a reliability model has been developed for PV farms with considering both the uncertainties associated... 

Today’s the technology based on dye-sensitized solar cells (DSSCs) has an important role in all photovoltaic system technologies. DSSCs can generate electricity with various degrees of transparency; this makes it suitable for use in various industries, especially in construction industry as smart windows. In fact DSSC can produce electricity and having natural light, simultaneously. It is obvious that DSSCs need to absorb solar radiation as much as possible. Since, the effective use of all incident lights leads to an increase in cell efficiency and this increase in efficiency is related to the amount of dye adsorbed on the surface of nanostructured electrode, so higher amount of dye for... 

Solar Chimney (SC) can play a significant role in energy consumption reduction of ventilation applications. The primary purpose of this study is to ameliorate the performance of an inclined rooftop SC integrated with the Phase Change Material (PCM) and Photovoltaic (PV) module, called the SC-PCM-PV system. To this aim, the effects of using finned absorbers and composite PCMs on the performance of the SC-PCM-PV system are investigated for the first time. A 3D-CFD model is developed via the finite volume method to examine the impact of various design parameters, including fin number, fin thickness, PCM type, and PCM mass on natural ventilation duration, ventilation capacity, and power output.... 

Well-crystallized TiO2 and neodymium (Nd)-doped TiO2 nanoparticles with various doping levels were synthesized by hydrothermal method and utilized as the photoanode of nanostructured solar cells. The results indicated that Nd-doping was caused the absorption spectra shift to higher wavelength while the morphology and surface area were unchanged. As a result, by employing 0.4 mol% Nd in the TiO2 photoelectrode, the overall conversion efficiency of the cell reached 9.08% which is 26% higher than pure one. Based on the photo-electrochemical characterizations, the improvement is a consequence of electrons injection increment from dye to TiO2 conduction... 

Although morphological disorder of nanotube structure is further down than the nanoparticular electrode, its density of traps are the hindering effects in the charge transport. In this study, crack-free TiO2 nanotube membranes, which obtained through a re-anodizing process, are fixed on transparent fluorine–tin-oxide glass by applying a few drops of Titanium Isopropoxide without needing the TiO2 powder paste. Front-side illuminated dye sensitized solar cells fabricated by undoped, N-doped and blue TiO2 nanotube membranes are investigated. The electrical characteristics of TiO2 nanotube based dye sensitized solar cells are followed by theoretical analysis using simple one-diode model.... 

Photovoltaic energy is one of the clean and efficient energies which has been developing quickly in the last years. As the penetration of solar plants is increasing in the electricity network, new problems have arisen in network operation. This paper models a high penetration factor of solar energy in the electricity network and investigates the impact of solar energy growth on both the generation schedule of different power plants and in the natural gas transmission network. Fuel management of gas power plants is modeled through simulation of the natural gas transmission network. To this end, an increase in the penetration of solar energy in the electricity network inevitably leads to a... 

The paper presents further experiments with an extended version of a comprehensive model for assessment of energy technologies and research and development (R&D) planning to evaluate the impact of innovation programs on development of Iranian electricity-supply system. This analytical instrument is a model of energy R&D resource allocation with an explicit perspective of developing countries which has been linked to a bottom-up energy-systems model. Three emerging electricity generation technologies of solar PV, wind turbine and gas fuel cell are considered in the model and the impact of innovation programs on cost-reducing innovation for them is examined. The main results provided by the... 

As one of the cleanest energies, hydrogen has attracted much attention over the past decade. Hydrogen can be produced using water electrolysis in a Proton Exchange Membrane Electrolysis Cell (PEMEC). In the present study, the performance of the PEMEC, powered by the Photovoltaic-Thermal (PVT) system, is scrutinized. It is considered that the PVT system provides the required electrical power of the PEMEC and preheats the feedwater. A comprehensive numerical model of the coupled PVT-PEMEC system is developed. The model is used to investigate the effect of various operating parameters, including solar radiation intensity, inlet feedwater temperature, and feedwater mass flow rate, on the... 

As one of the cleanest energies, hydrogen has attracted much attention over the past decade. Hydrogen can be produced using water electrolysis in a Proton Exchange Membrane Electrolysis Cell (PEMEC). In the present study, the performance of the PEMEC, powered by the Photovoltaic-Thermal (PVT) system, is scrutinized. It is considered that the PVT system provides the required electrical power of the PEMEC and preheats the feedwater. A comprehensive numerical model of the coupled PVT-PEMEC system is developed. The model is used to investigate the effect of various operating parameters, including solar radiation intensity, inlet feedwater temperature, and feedwater mass flow rate, on the... 

In this work, the combination of H2O2 and an active visible-light-driven photocatalyst (Ag-S/PEG/TiO2) was utilized under natural solar radiation for the degradation of 2-nitrophenol (2-NP), and interaction effects between the photocatalyst and hydrogen peroxide were analyzed. For this purpose, experiments were designed using the response surface methodology based on the central composite design. The resulting data was utilized to obtain a model for the prediction of response (the degradation efficiency) as a function of two independent factors (H2O2 concentration and the photocatalyst loading). The statistical analysis indicated that optimum values of each of the two independent factors... 

N-annulated perylene based materials show outstanding and tunable optical and physical properties, making them suitable to be charge transport materials for optoelectronic applications. However, this type of materials has so far not been well studied in solar cells. Here, we develop a new hole transport material (HTM), namely S5, based on perylene building block terms, for organic-inorganic hybrid perovskite solar cells (PSCs). We have systematically studied the influences of the film thickness of S5 on their photovoltaic performance, and a low concentration of S5 with a thinner HTM film is favorable for obtaining higher solar cell efficiency. S5 shows excellent energy alignment with... 

All current highest efficiency perovskite solar cells (PSCs) use highly toxic, halogenated solvents, such as chlorobenzene (CB) or toluene (TLN), in an antisolvent step or as solvent for the hole transporter material (HTM). A more environmentally friendly antisolvent is highly desirable for decreasing chronic health risk. Here, the efficacy of anisole (ANS), as a greener antisolvent for highest efficiency PSCs, is investigated. The fabrication inside and outside of the glovebox showing high power conversion efficiencies of 19.9% and 15.5%, respectively. Importantly, a fully nonhalogenated solvent system is demonstrated where ANS is used as both the antisolvent and the solvent for the HTM.... 

Graphitic carbon nitride (g-C3N4) is a metal-free conjugated polymer constructed from two-dimensional sheets with a bandgap energy of 2.7 eV, which makes it an applicable and efficient visible-active photocatalyst for H2 production. In the present study, the basic concepts and principles of photocatalytic water splitting have been discussed, and a guide for the selection of appropriate photocatalysts, focusing on the g-C3N4 nanomaterials, has been proposed. Our approach is mainly concentrated on evaluating two factors, namely the solar-to-hydrogen (STH) conversion and apparent quantum yield (AQY) for different photocatalysts, to provide an in-depth analysis and a framework for solar H2... 

The main purpose of this study is to provide the heating power for space heating and sanitary hot water for a residential house in sixteen stations located in Belgium using evacuated tube solar water (ETSW). A one-year dynamic simulation was performed using TSOL 5.5 software and Meteonorm 7.1 was used to obtain the climatic data. Technical and environmental studies as well as station rankings are the parameters that have been examined for the first time in the present study. The weighting results of using the Best-Worst method (BWM) revealed that total solar fraction and CO2 emission avoided have the highest and lowest weight, respectively. Station ranking was performed using ARAS technique...