Sharif Digital Repository

A carbon-paste electrode (CPE) is modified by incorporating cobalt-5-nitrosalophen (CoNSal) and tetraoctylammonium bromide (TOAB). The mechanism of electrocatalytic oxidation of dopamine (DA) and ascorbic acid (AA) at the surface of the CoNSal-modified CPE containing various percents of TOAB is thoroughly investigated by cyclic and differential pulse voltammetry. In solutions of pH 5.0, in which all studies are performed, DA exists as the positively charged species whereas AA is mainly as the neutral form. Therefore, the favorable ionic interaction (electrostatic repulsion) between the cationic form of DA and the cationic surfactant (TOA+) caused increasing the overvoltage for DA and... 

Rhamnolipids (RLs) produced by the opportunistic human pathogen Pseudomonas aeruginosa are considered as potential candidates for the next generation of surfactants. Large-scale production of RLs depends on progress in strain engineering, medium design, operating strategies, and purification procedures. In this work, the rhlAB genes extracted from a mono-RLs-producing strain of P. aeruginosa (ATCC 9027) were introduced to an appropriate safety host Pseudomonas putida KT2440. The capability of the recombinant strain was evaluated in various media. As a prerequisite for optimal medium design, a set of 32 experiments was performed in two steps for screening a number of macro-nutritional... 

Petroleum monoaromatics including benzene, toluene, ethylbenzene, and xylenes (BTEX) are among the notorious volatile organic compounds that contaminate water and soil. In this study, a surfactant- modified natural zeolite and its relevant granulated nanozeolites were evaluated as potential adsorbents for removal of petroleum monoaromatics from aqueous solutions. All experiments performed in batch mode at constant temperature of 20°C and pH of 6.8 for 48 h. The results revealed that the amount of BTEX uptake on granulated zeolites nanoparticles were remarkably higher than the parent micron size natural zeolite (in the order of four times). The isotherms data were analyzed using five models... 

Although alkaline-surfactant-polymer flooding is proved to be efficient for oil recovery from heavy oil reservoirs, the displacements mechanism/efficiency of this process in fractured systems needs to more discussion, especially in five-spot patterns. In this work, several ASP flooding test were performed on fractured micromodels which were initially saturated with heavy oil at constant flow rate and different fracture geometrical characteristics conditions. The ASP solutions are constituted from 5 polymers i.e. four synthetic polymers include three hydrolyzed polyacrylamide with different molecular weight as well as a non-hydrolyzed polyacrylamide and a biopolymer, 2 surfactants i.e. a... 

Although Alkaline-Surfactant-Polymer (ASP) flooding is proved to be efficient for heavy oil recovery, the displacement mechanisms/efficiency of this process should be discussed further in fractured porous media especially in typical waterflood geometrical configurations such as five-spot injection-production pattern. In this study, several ASP flooding tests were conducted in fractured glass-etched micromodels which were initially saturated with heavy oil. The ASP flooding tests were conducted at constant injection flow rates and different fracture geometrical characteristics were used. The ASP solutions constituted of five polymers, two surfactants and three alkaline types. The results... 

Although alkaline-surfactant-polymer (ASP) flooding has proven efficient for heavy oil recovery, the displacement mechanisms and efficiency of this process should be discussed further in fractured porous media. In this study, several ASP flooding tests were conducted in fractured glass-etched micromodels with a typical waterflood geometrical configuration, i.e. five-spot injection-production pattern. The ASP flooding tests were conducted at constant injection flow rates but different fracture geometrical characteristics. The ASP solutions consisted of five polymers, two surfactants, and three alkaline types. It was found that using synthetic polymers, especially hydrolyzed polyacrylamide... 

During any microbial enhanced oil recovery process, both cells and the metabolic products of bacteria govern the tertiary oil recovery efficiency. However, very accurate examination is needed to find the functionality of these tiny creatures at different reservoir conditions. In this regard, the effect of cell structure on ultimate microbial recovery efficiency which is the most dominant mechanism based on the microorganism types (gram-negative or gram-positive) was systematically investigated. At the first stage, possible different active mechanisms using Bacillus stearothermophilus SUCPM#14 strain were tested using specially designed injection protocol, in situ and ex situ core flooding... 

Microbial enhanced oil recovery (MEOR) process is divided into two main categories, namely in-situ and ex-situ techniques. It utilizes reservoir microorganisms or specially selected bacteria to use their metabolites for more oil recovery from depleted oil reservoirs. In the present study, the potential of two biosurfactant-producing strains of Enterobacter cloacae and Bacillus stearothermophilus SUCPM#14 were investigated on tertiary oil recovery efficiency in carbonated cores using different designed injection protocols. The required operational time, process cost and proper selection of bacterial formulation during the MEOR process were the main objectives of this study. The results of... 

In this report the wetting behaviour between polycrystalline alumina substrates and molten aluminium doped with magnesium as a wetting agent has been studied using the sessile drop technique. The time required for equilibrium attainment is investigated. To explore the formation of possible phases at the interface, electron microscopic studies along with EDX analysis have been employed. It is found that magnesium reduces the time and temperature required for equilibrium in the Al/Al2O3 system. The Al-7 wt% Mg and Al-10 wt% Mg alloys can wet alumina at temperatures as low as 900 °C. It is also found that molten aluminium doped with magnesium can wet polycrystalline alumina at temperatures... 

Among the various approaches, ZnS treatment is the most convenient method for reducing the charge recombination in quantum dot-sensitized solar cells (QDSSCs). Here an improved method of ZnS treatment is explained for efficiency enhancement in QDSSCs. To get to the goal of device performance improvement, it is essential to have a uniform deposited layer. We utilized Triton X-100 (TX-100) as a surfactant to the convenient aqueous precursors during ZnS deposition by successive ionic layer adsorption and reaction method. It helps to decrease in contact angle and increase in wettability of the aqueous precursor and results in a more uniform deposited layer. The effect of modified ZnS treatment... 

A template-directed synthetic method, using surfactant cetyltrimethylammonium bromide (CTAB) as a template and co-surfactant polyethylene glycol (PEG600) as a co-template under hydrothermal conditions, has been applied to obtain dandelion-like HAp. The morphology, size, crystalline phase, chemical composition, physical characteristics, and thermal behavior of the product were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray powder diffraction (XRD), Fourier ransform infrared spectroscopy (FTIR), induced coupled plasma spectroscopy (ICP), BET (Brunauer, Emmett, and Teller) method, and simultaneous thermal analysis (STA). SEM and TEM... 

Microbubbles are broadly used as ultrasound contrast agents. In this paper we use a low-cost flow focusing microchannel fabrication method for preparing microbubble contrast agents by using some surface active agents and a viscosity enhancing material to obtain appropriate microbubbles with desired lifetime and stability for any in vitro infusion for velocity measurement. All the five parameters that govern the bubble size extract and some efforts are done to achieve the smallest bubbles by adding suitable surfactant concentrations. By using these microbubbles for the echo-particle image velocimetry method, we experimentally determine the velocity field of steady state and pulsatile pipe... 

In industrial liquid-liquid extraction processes, the feed is not clean liquid but there are various kinds of contaminants in the feed entering the extractors. In this regard, a two-impinging-jets contacting device (TIJCD) was tested through the standard test system recommended by the European Federation of Chemical Engineering (EFCE), namely toluene-acetone-water, in the presence and absence of various types of surface-active agents (SAAs). The influences of anionic, cationic, and nonionic SAAs such as sodium dodecyl sulfate (SDS), dodecyl trimethyl ammonium chloride (DTMAC), and octylphenol decaethylene glycol ether (Triton X-100), respectively, on the extraction efficiency and overall... 

Despite previous researches on ion-engineered waterflooding (IEWF), its underlying mechanisms are not fully understood, particularly in presence of additives, like surfactants. This paper concerned with the contribution of Ca 2+ , Mg 2+ , SO 4 2- and Na + into altering wettability of oil-wet carbonate minerals towards water preferred state. As a mechanistic study, an experiment workflow was conducted to probe the impact of ions' concentrations in SW, either with or without sodium dodecylbenzene sulfonate (SDBS) which is an anionic surfactant. At first, contact angle (CA) measurement was carried out to evaluate the degree of wettability reversal upon treating the oil-aged calcite slabs with... 

The effect of one of the surfactants such as Tiron, a compound based on the benzene molecule, on the morphology and chemical composition of zinc oxide deposits, produced from a zinc complex solution using two-stage chemical deposition (TSCD) technique, has been investigated. TSCD technique is a novel and simple chemical route for the deposition of ZnO film from aqueous solution. Zinc oxide films deposited on high purity alumina (HPA) as a substrate. The results show that the addition of Tiron changes the surface morphology and causes to form the fine-grained structure. With a dense and nodular-shape appearance, the film produced from the precursor of zinc complex-containing Tiron, is... 

Rheological behavior of two crude oils and their surfactant-stabilized emulsions with initial droplet sizes ranging from 0.5 to 75 μm were investigated at various temperatures under steady and dynamic shear testing conditions. In order to evaluate the morphology and Stability of emulsions, microscopic analysis was carried out over three months and average diameter and size distribution of dispersed droplets were determined. The water content and surfactant concentration ranged from 10 to 60% vol/vol and 0.1 to 10% wt/vol, respectively. The results indicated that the rheological properties and the physical structure and stability of emulsions were significantly influenced by the water content... 

As many fields around the world are reaching maturity, the need to develop new tools that allows reservoir engineering to optimize reservoir performance is becoming more demanding. One of the more challenging and influential problems along these lines is the well placement optimization problem. Determining of the location of new wells is a complex problem that depends on reservoir and fluid properties, well and surface equipment specifications, and economic criteria. Various approaches have been proposed for this problem. Among those, direct optimization using the simulator as the evaluation function, although accurate, is in most cases infeasible due to the number of simulations required.... 

The remediation of nonaqueous phase liquids (NAPLs) enhanced by surfactant and nanoparticles (NP) has been investigated in numerous studies. However, the role of NP-assisted surfactants in the dissolution process is still not well discussed. Besides, there is a lack of empirical dissolution models considering the effects of initial residual saturation Strap, NAPL distribution, and surfactant concentration in NAPL-aqueous phase systems. In this work, micromodel experiments are conducted to quantify mass transfer coefficients for different injected aqueous phases including deionized water, SDS surfactant solutions, and NP-assisted solutions with different levels of concentrations and flow... 

In this paper, the dissolution and mobilization of non-aqueous phase liquid (NAPL) blobs in the Surfactant-Enhanced Aquifer Remediation (SEAR) process were upscaled using dynamic pore network modeling (PNM) of three-dimensional and unstructured networks. We considered corner flow and micro-flow mechanisms including snap-off and piston-like movement for two-phase flow. Moreover, NAPL entrapment and remobilization were evaluated using force analysis to develop the capillary desaturation curve (CDC) and predict the onset of remobilization. The corner diffusion mechanism was also applied in the modeling of interphase mass transfer to represent NAPL dissolution as the dominant mass transfer... 

One of the main challenges in elimination of oil contamination from polluted environments is improvement of biodegradation by highly efficient microorganisms. Bacillus subtilis MJ01 has been evaluated as a new resource for producing biosurfactant compounds. This bacterium, which produces surfactin, is able to enhance bio-accessibility to oil hydrocarbons in contaminated soils. The genome of B. subtilis MJ01 was sequenced and assembled by PacBio RS sequencing technology. One big contig with a length of 4,108,293 bp without any gap was assembled. Genome annotation and prediction of gene showed that MJ01 genome is very similar to B. subtilis spizizenii TU-B-10 (95% similarity). The comparison...