Sharif Digital Repository

Storage conditions seem to be important in the long-term stability of nanoparticles (NPs). This work studies the effects of surfactants and storage container on particle size distribution and zeta potential during long-term storage of acid hydrolyzed potato starch NPs. The NPs were prepared from potato starch using acid hydrolysis and high-intensity ultrasonication. During the ultrasonic treatment, the surfactants were added dropwise to the solutions to reduce the size and stabilize the formed NPs. Particle size distribution, zeta potential, and FE-SEM were used to characterize the ensuing NPs. Additionally, a 5-month stability study was performed to evaluate the maintenance of potato starch... 

Highlights: The objective of this work is to investigate the effects of the surfactants on the oil extraction from the dead ends through the numerical simulations and experimental evidences. The volume of fluid approach in the frame of the finite volume method has been used for numerical simulations in 2-D domain and experimental flooding tests have been done using a glassy micro-model. The effects of the water-oil, water-wall and oil-wall interfacial tensions have been investigated numerically and some results are compared to experimental flooding results. Simulations have been done in the cases of water-wet, neutralized-wet and oil-wet micro-models also. The numerical results show that in... 

Solvatochromic UV-vis shifts of three probes 4-nitroaniline, 4-nitroanisol, and Reichardt's dye in binary mixtures of polyethylene glycol p-(1,1,3,3-tetramethylbutyl)-phenyl ether (Triton X-100 or TX-100) with methanol, ethanol, 1-propanol, and water have been investigated at 298 K. Structural and intermolecular interactions of solvatochromic probes were determined in these systems. Solvatochromic parameters, including normalized polarity (ETN), dipolarity-polarizability (π∗), hydrogen-bond donor (α), and hydrogen-bond acceptor (β) abilities, were measured at a wide range of mole fraction (0 ≤ X ≤ 1) with 0.1 increment. Interestingly, a similar behavior of ETN and α is observed in... 

A biocompatible ferrofluid have been prepared by coprecipitation of FeCl 2.4H 2O and FeCl 3.6H 2O under ultrasonic irradiation and with NaOH as alkaline agent. Cystein was also used as capping agent in the solution. Magnetic properties of the produced ferrofluid were then determined by VSM test and magnetite nanoparticles were characterized by XRD and TEM techniques. The effect of surfactant to Fe ion weight ratio was also studied during this project by using two different amount of Dextran. Results showed the presence of a biocompatible superparamagnetic ferrofluid including magnetite nanoparticles with particle size ranging under 20 nm. The increase in the surfactant content results in the... 

In this study, a mixture-based sulfonate-based surfactant with a novel formula capable of functioning in real oil reservoir conditions was prepared and some microscopic parameters, like its compatibility state, emulsion behavior, interfacial tension, and temperature dependency in the presence of a heavy oil sample, and two of the most popular alkalis were analyzed; then the results were compared with those of a commercial sulfate-based surfactant. The designed surfactant provided an optimum three-phase region in relatively high salinity media; however, its optimum value decreased when adding any alkaline materials; this trend was reversed for the solutions made with the sulfate-based... 

In this study, a mixture-based sulfonate-based surfactant with a novel formula capable of functioning in real oil reservoir conditions was prepared and some microscopic parameters, like its compatibility state, emulsion behavior, interfacial tension, and temperature dependency in the presence of a heavy oil sample, and two of the most popular alkalis were analyzed; then the results were compared with those of a commercial sulfate-based surfactant. The designed surfactant provided an optimum three-phase region in relatively high salinity media; however, its optimum value decreased when adding any alkaline materials; this trend was reversed for the solutions made with the sulfate-based... 

A batch extraction of an essential amino acid, Phenylalanine, from an aqueous solution of different concentrations by an Emulsion Liquid Membrane (ELM) was developed using D2EHPA as a cationic carrier, Span 80 as the surfactant, paraffin and kerosene as the diluents, and HCl as the internal electrolyte. All effective parameters such as pH of initial aqueous external phase, electrolyte concentration in aqueous internal phase, carrier and surfactant concentration in emulsion, volume ratio of the organic to aqueous internal phase (Roi), volume ratio of the W/O emulsion to aqueous external phase (Rew) and time were examined and optimized using Taguchi method which was the first time of... 

A batch extraction of an essential amino acid, phenylalanine, from an aqueous solution of different concentrations by an Emulsion Liquid Membrane (ELM) was developed using D2EHPA as a cationic carrier, Span 80 as the surfactant, paraffin, and kerosene as the diluents, and HCl as the internal electrolyte. All effective parameters such as the initial pH of the aqueous external phase, the electrolyte concentration in the aqueous internal phase, carrier, and surfactant concentration in the emulsion, the volume ratio of the organic to aqueous internal phase (Roi), the volume ratio of the W/O emulsion to the aqueous external phase (Rew) and time were examined and optimized using the Taguchi... 

With modified measuring procedure and measuring cell design in the drop profile tensiometer PAT, it became possible to study the rate of water evaporation through adsorbed or spread surface layers. This method was employed to measure the rate of water evaporation from drops covered by adsorbed layers of some proteins and surfactants, in particular n-dodecanol. It was shown that the formation of dense (double or condensed) adsorbed layers of protein and the formation of 2D-condensed n-dodecanol layer decrease the water evaporation rate by 20-25% as compared with pure water. At the same time, the adsorbed layers of ordinary surfactants (sodium dodecyl sulfate and nonionic ethoxylated... 

We previously reported that MR01, an indigenous strain of Pseudomonas aeruginosa, was able to produce a rhamnolipid-type biosurfactant. Here, we attempted to define the structural properties of this natural product. The analysis of the extracted biosurfactant by thin-layer chromatography (TLC) revealed the presence of two compounds corresponding to those of authentic mono- and di-rhamnolipid. The identity of two structurally distinguished rhamnolipids was confirmed by 1H and 13C nuclear magnetic resonance (NMR) spectroscopy. Liquid chromatography/mass spectrometry (LC/MS) of extracted biosurfactant revealed up to seventeen different rhamnolipid congeners. Further quantification showed... 

Rhamnolipids (RLs) produced by the opportunistic human pathogen Pseudomonas aeruginosa are considered as potential candidates for the next generation of surfactants. Large-scale production of RLs depends on progress in strain engineering, medium design, operating strategies, and purification procedures. In this work, the rhlAB genes extracted from a mono-RLs-producing strain of P. aeruginosa (ATCC 9027) were introduced to an appropriate safety host Pseudomonas putida KT2440. The capability of the recombinant strain was evaluated in various media. As a prerequisite for optimal medium design, a set of 32 experiments was performed in two steps for screening a number of macro-nutritional... 

We have fabricated and characterised colloidal silver nanoparticles by the electrical arc discharge method in DI water. Size and optical properties of the silver nanoparticles were studied versus different arc currents. Optical absorption indicates a plasmonic peak at 392 nm for 10 A which increases to 398 nm for 20 A arc current. This reveals that by raising the arc current the size of the nanoparticles increases. Optical absorption of silver nanoparticles after 3 weeks shows precipitation of them in a water medium. The effect of different surfactant and stabilizer concentrations such as cethyl trimethylammonium bromide (CTAB), polyvinyl pyrrolidone (PVP), sodium citrate, sodium dodecyl... 

This paper presents a state of the art review of adsorption models for a new plant-based surfactant adsorption onto sandstone minerals. The adsorption data at both kinetic and equilibrium modes were obtained from batch experiments. Four adsorption kinetic models, five two-parameter, and six three-parameter equilibrium models were used for interpretation of the obtained data. Among the two and three-parameter isotherm models applied, the Jovanovic and the Khan isotherms showed the best fit, respectively. And the pseudo-second order model presented a better fit than other kinetic models. Finally, a computer-based modeling approach was developed and used for predicting the kinetics of... 

This paper presents a state of the art review of adsorption models for a new plant-based surfactant adsorption onto sandstone minerals. The adsorption data at both kinetic and equilibrium modes were obtained from batch experiments. Four adsorption kinetic models, five two-parameter, and six three-parameter equilibrium models were used for interpretation of the obtained data. Among the two and three-parameter isotherm models applied, the Jovanovic and the Khan isotherms showed the best fit, respectively. And the pseudo-second order model presented a better fit than other kinetic models. Finally, a computer-based modeling approach was developed and used for predicting the kinetics of... 

The size mono-dispersity, saturation magnetization, and surface chemistry of magnetic nanoparticles (NPs) are recognized as critical factors for efficient biomedical applications. Here, we performed modified water-in-oil inverse nano-emulsion procedure for preparation of stable colloidal superparamagnetic iron oxide NPs (SPIONs) with high saturation magnetization. To achieve mono-dispersed SPIONs, optimization process was probed on several important factors including molar ratio of iron salts [Fe 3 and Fe 2], the concentration of ammonium hydroxide as reducing agent, and molar ratio of water to surfactant. The biocompatibility of the obtained NPs, at various concentrations, was evaluated via... 

A detailed pseudo-bulk model has been used for prediction of conversion and particle size distribution (PSD) of vinyl acetate in a continuous emulsion polymerization reactor. Finite volume (FV) and moment techniques are applied for solving population balance equation under continuous operation. It is found that both methods can predict sustained oscillations in the monomer conversion, however the FV method matches the experimental data better than the moment method. The monomer conversion and free surfactant concentration are controlled via two single control loops. In this work, a new control strategy for controlling monomer conversion has been proposed. It has been shown that monomer... 

Self-assembled dandelion-like hydroxyapatite (HAp) nanostructures were successfully synthesized via a mild template-free hydrothermal process, using ethylenediaminetetraacetic acid (EDTA) as the surfactant. The obtained dandelion-like HAp nanostructures were between 5 and 8 μm in diameter and were composed of radially oriented nanorods with an average diameter of about 200 nm. The X-ray diffraction analysis and Fourier transform infrared spectroscopy were used to characterize the crystalline phase and purity of the synthesized nanostructures. The Brunauer-Emmett-Teller surface area of the dandelion-like nanostructures was measured to be about 39 m2/g. The results of thermal analysis revealed... 

Colloidal Gas Aphron (CGA) are finding increasing application in fields of science and engineering because of their distinctive characteristic. As interest in the application of CGA based fluids grows and in order to select the best procedure for using them in successful petroleum engineering operations, there is a need to gain a better understanding of the factors that affect their properties and behavior. This article discusses the rheological characterization, stability analysis and filtration properties of CGA based fluids for three bio-polymers and two ionic surfactant. The stability and filtration analysis were investigated with the static drain rate technique and API filtration tests,... 

Inkjet printing of colloidal metals is an attractive method for direct patterning of electrically conductive structures and interconnects in electronic devices, owing to low-cost, low-waste and simplicity of the process. In the present work, mixtures of well-dispersed silver nanoparticles and ethylene glycol were prepared for the inkjet printing process. Three different surfactants including PVP, MSA and AOT were added to study the stability of the nanosilver colloids. The effect of high-intensity ultrasonic treatment and temperature on the rheological properties was investigated utilising a rheometer in plate-plate geometry. It is shown that the viscosity of the ink increases with... 

In industrial liquid-liquid extraction processes, the feed is not clean liquid but there are various kinds of contaminants in the feed entering the extractors. In this regard, a two-impinging-jets contacting device (TIJCD) was tested through the standard test system recommended by the European Federation of Chemical Engineering (EFCE), namely toluene-acetone-water, in the presence and absence of various types of surface-active agents (SAAs). The influences of anionic, cationic, and nonionic SAAs such as sodium dodecyl sulfate (SDS), dodecyl trimethyl ammonium chloride (DTMAC), and octylphenol decaethylene glycol ether (Triton X-100), respectively, on the extraction efficiency and overall...