Sharif Digital Repository

Shot peening (SP), as one of the severe plastic deformation (SPD) methods is employed for surface modification of the engineering components by improving the metallurgical and mechanical properties. Furthermore, artificial neural network (ANN) has been widely used in different science and engineering problems for predicting and optimizing in the last decade. In the present study, effects of conventional shot peening (CSP) and severe shot peening (SSP) on properties of AISI 1060 high carbon steel were modelled and compared via ANN. In order to networks training, the back propagation (BP) error algorithm is developed and data of experimental tests results are employed. Experimental data... 

Abstract: Shot peening is well-known process for mechanical properties integrity in metallic materials. In present study influences of different shot peening treatments on the surface hardness of different carbon steels were investigated experimentally and then alternative approach by using artificial neural network is presented for hardness prediction of the shot peened surface. After modeling a comprehensive parametric investigations and sensitivity analysis were applied according to the influence of the related effective parameters on surface hardness improvements. Graphic Abstract: [Figure not available: see fulltext.] © 2020, The Korean Institute of Metals and Materials  

Shot peening is one of the most effective surface strengthening treatment technologies in which compressive residual stresses are induced beneath the specimen surface. Effects of various factors on the distribution of residual stress profile induced by shot peening have been investigated by many researchers. However, initial residual stresses are one of the important factors which affect the shot peening residual stress.This study is aimed to present comprehensive numerical and experimental study on the effect of initial residual stresses on the shot peened specimen. Initial residual stresses were induced using a four-point bending rig and grinding. Incremental center hole drilling (ICHD)... 

Surface passivation of organic-inorganic halide perovskites (OIHPs) is a crucial step to annihilate the surface defects and to control the deteriorated ion migration phenomenon. Here, we study the role of lead sulfate (PbSO4) as an effective passivator in OIHP single crystals (SCs). Using impedance spectroscopy, we evaluate the ion migration and electrical properties of lead sulfate-passivated methylammonium lead tri-bromide (MAPbBr3) SCs. We found that the low-frequency impedance response that is assigned to the ionic motion in the MAPbBr3 SC is strongly affected by the inorganic PbSO4 surface treatment. The activation energy corresponding to the ion migration of MAPbBr3 SC is increased... 

In order to produce a thick near equi-atomic NiTi intermetallic layer on the surface of titanium plate, layers of nickel with thicknesses of 30 μm and 60 μm were electroplated on commercial pure (Cp) titanium and subsequently were heat treated at 850°C and 900°C. The effects of heat treating temperature and the thickness of electroplated nickel on the evolution of the microstructure and mechanical properties were studied. The results confirm the formation of various intermetallic layers in the coatings that substantially affect their hardness. The optimum condition for the formation of a thick NiTi intermetallic layer on the outer surface of the titanium was diffusion treatment of the sample... 

The bioinertness makes surface treatments essential to improve the bioactivity of porous titanium scaffold, and surface treatment might affect their mechanical properties. So finding an optimum condition lying between bioactivity and mechanical properties seems to be curial. In this research, the effect of the time of the thermal oxidation at 600 °C on apatite formation and mechanical properties of the porous titanium scaffold was studied. The results of thin film X-ray diffraction and Raman spectroscopy indicated that the surface of heat treated samples up to 480 min was mainly covered by rutile. Also, wettability measurement and in vitro apatite formation ability assessment indicated that... 

Direct oxidation is a simple and effective method for titanium surface treatment. In this research, a titanium sample was directly oxidized at the high temperature in two different atmospheres, air and pure oxygen, to obtain better atmosphere for titanium surface treatment. The results of the Raman spectroscopy indicated that in both atmospheres, the rutile bioactive phase (TiO2) has been formed on the titanium surface. The results of X-ray diffraction (XRD) also revealed that the surface of oxygen-treated sample was composed of the rutile phase and titanium monoxide (TiO), while at the surface of the air-treated sample, the rutile phase and titanium dioxide had been formed. Further, the... 

A duplex surface treatment on DIN 1.2210 steel has been developed involving nitriding and followed by chromium thermo-reactive deposition (TRD) techniques. The TRD process was performed in molten salt bath at 550, 625 and 700°C for 1-14h. The process formed a thickness up to 9.5μm of chromium carbonitride coatings on a hardened diffusion zone. Characterization of the coatings by means of scanning electron microscopy (SEM) and X-ray diffraction analysis (XRD) indicates that the compact and dense coatings mainly consist of Cr(C,N) and Cr2(C,N) phase. All the growth processes of the chromium carbonitride obtained by TRD technique followed a parabolic kinetics. Activation energy (Q) for the... 

Surface functionality of nanoparticles has been pivotal in defining interactions of nanoparticles and biomolecules. To explore various functionalities on the surface of nanoparticle through a facile procedure, various carbon-based nanoparticles, modified with a specific natural amino acid, were synthesized; the amino acids were chosen in order that almost all classes of amino acids were included. After characterizations of the nanoparticles using several spectroscopic methods, the effects of surface modification of nanoparticles were examined against amyloid formation, exploiting insulin as a model amyloidogenic polypeptide. Although most amino acids afforded carbon nanoparticles, only... 

Spontaneous generation of nanobubbles (NBs) was developed by using a controllable platform of superfast microvortices, based on turbulent jet flows in the presence of graphene oxide (GO) sheets. Very high energy dissipation rates through discharging warm water into cold N2 aqueous solutions resulted in creation of micro/submicro-vortices. Shear stresses in these domains generated gas local supersaturations, leading to the formation of high concentration (∼109 mL−1) of stable NBs. Introducing GO sheets into the microvortex system resulted in effective manipulation of NBs by providing energetically favorable sites for prompt heterogeneous nucleation as well as stronger shear rate fluctuations.... 

In this research, surface modification of aromatic polyamide thin film composite (TFC) reverse osmosis (RO) membranes was carried out using dielectric barrier discharge (DBD) plasma treatment to improve the performance and fouling resistance of prepared RO membranes. First, polyamide TFC RO membranes were synthesized via interfacial polymerization of m-phenylenediamine and trimesoyl chloride monomers over microporous polysulfone support membrane. Next, the DBD plasma treatment with 15 s, 30 s, 60 s, and 90 s duration was used for surface modification. The surface properties of RO membranes were characterized by attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR),... 

In this research, surface modification of aromatic polyamide thin film composite (TFC) reverse osmosis (RO) membranes was carried out using dielectric barrier discharge (DBD) plasma treatment to improve the performance and fouling resistance of prepared RO membranes. First, polyamide TFC RO membranes were synthesized via interfacial polymerization of m-phenylenediamine and trimesoyl chloride monomers over microporous polysulfone support membrane. Next, the DBD plasma treatment with 15 s, 30 s, 60 s, and 90 s duration was used for surface modification. The surface properties of RO membranes were characterized by attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR),... 

Among polymers, polyaniline (PANi) has been introduced as a good candidate for muscle regeneration due to high conductivity and also biocompatibility. Herein, for the first time, we report the use of electrospun nanofibrous membrane of PAN-PANi as efficient scaffold for muscle regeneration. The prepared PAN-PANi electrospun nanofibrous membrane was characterized by scanning electron microscopy (SEM), Attenuated total reflectance fourier transform infrared spectroscopy (ATR-FTIR) and tensile examination. The softer scaffolds of non-composite electrospun nanofibrous PAN govern a higher rate of cell growth in spite of lower differentiation value. On the other hand, PAN-PANi electrospun... 

The present study analyzed the dose-dependent cyto- and genotoxicity of graphene oxide and reduced graphene oxide on spermatogonial stem cells (SSCs) for the first time. The results showed that graphene oxide significantly increased oxidative stress at concentrations of 100 and 400 μg/ml, while low concentrations did not have a significant effect. In addition, according to the MTT assay, the cell number decreased in high-concentration (100 and 400 μg/ml) graphene oxide-treated samples compared to untreated cells. However, a reduced graphene-treated sample demonstrated a significant increase in cell number. Moreover, microscopic analysis found high concentrations of graphene nanosheets in... 

In this work, we synthesized carbon hollow spheres (CHSs) using the silica templating method, encapsulated 2-mercaptobenzimidazole (MBI) inhibitor in the CHSs and evaluated their corrosion inhibition performance upon exposure of mild steel to a saline solution containing the released inhibitor. The effects of silica template surface modification on the CHS structure was evaluated, while the structure and morphology of the synthesized CHS was analyzed using field emission scanning electron microscope (FE-SEM), transmission electron microscope (TEM), Raman spectroscopy and X-ray diffraction (XRD) spectroscopy. Furthermore, thermogravimetric analysis (TGA), energy-dispersive X-ray spectroscopy... 

An offshore structure is exposed to environmental loading and cyclic stress variations throughout its life. This would result in the possibility of fatigue cracking in its members. Cracks in these structures usually initiate around welded areas, then grow progressively from the heat-affected zone to base metal through the thickness of the tubular members. Therefore, fatigue life improvement of offshore structures is of great importance. In this paper, structural analysis of an offshore platform is carried out and the critical joint is specified. The welding process is simulated and the residual stresses due to the welding are determined. Experimental residual stress measurement is carried... 

The conventional solar cell architectures include a p-n junction of c-Si sandwiched by rear and front contacts. The conventional approach features a complex as well as expensive procedure. Here, we propose a new architecture for p-n heterojunction solar cells prepared by a simple and cost-effective procedure. In this regard, (1) a silicon wafer underwent surface treatment through electrochemical anodization. To prepare a stick junction, (2) photoactive TiO2 nanoparticles were deposited over the porous layer by electrophoretic technique. Finally, (3) indium tin oxide (ITO) was sputtered. During the fabrication steps, we examined various anodization times ranging from 6 to 12 min to study the... 

Denim jeans have consistently been fashionable around the world. This fabric inspired strong opinions from historians, teenagers, and movie stars, and has acquired different styles throughout the years. Most jeans today are stonewashed; this technique first become popular in 1970. Now, in addition to pumice stones, enzymes are used on the cotton fabrics to create the stonewashed look. Nowadays, plasma treatment is a cost-effective and environment-friendly process which is able to modify the properties of the fabric surface in order to achieve this effect. Plasma surface treatment changes the properties of the fabric up to a limited depth (several molecular layers), leaving the bulk... 

Control charts are the most popular statistical process control tools used to monitor process changes. When a control chart indicates an out-of-control signal it means that the process has changed. However, control chart signals do not indicate the real time of process changes, which is essential for identifying and removing assignable causes and ultimately improving the process. Identifying the real time of the change is known as the change-point estimation problem. Most of the traditional methods of estimating the process change point are developed based on the assumption that the process follows a normal distribution with known parameters, which is seldom true. In this paper, we propose... 

The influences of cupric oxide layer thickness, cuprous oxide particles, and pores on mechanical properties and microstructure of alumina-copper eutectic bond have been investigated. The furnace atmosphere in the first stage was argon gas with 2 × 10-6 atm oxygen partial pressure. In the second stage, the furnace atmosphere was same as the first stage unless that in cooling between 900-1000 °C, the hydrogen gas was purged in furnace atmosphere. Finally, in the last stage a vacuum furnace with 5 × 10 -8 atm pressure was chosen for bonding procedure. Peel strength of first stage specimens shows that cupric oxide layer with 320 ± 25 nm thick generates the maximum peel strength (13.1 ± 0.3...