Sharif Digital Repository

Although Alkaline-Surfactant-Polymer (ASP) flooding is proved to be efficient for heavy oil recovery, the displacement mechanisms/efficiency of this process should be discussed further in fractured porous media especially in typical waterflood geometrical configurations such as five-spot injection-production pattern. In this study, several ASP flooding tests were conducted in fractured glass-etched micromodels which were initially saturated with heavy oil. The ASP flooding tests were conducted at constant injection flow rates and different fracture geometrical characteristics were used. The ASP solutions constituted of five polymers, two surfactants and three alkaline types. The results... 

Effects of initiator and surfactant concentrations and temperature on styrene conversion and polymer particle size distribution (PSD) in a batch emulsion polymerization are investigated through simulation and experimental studies. The detailed model based on population balance (zero-one model), accounting for nucleation, growth and coagulation phenomena has been used for prediction of particle size distribution. In checking the effect of initiator concentration on final PSD, it was noticed that when critical micelle concentration (CMC) is kept constant, the model cannot predict PSD very well. Thus, a correlation for calculating critical micelle concentration has been proposed and... 

In this research, the influence of anionic surfactant sodium dodecyl sulfate (SDS), pH, substrate finishing, and annealing temperature on the surface morphology and hardness of the electroless nickel phosphorus (ENi-P) coatings were studied. Taguchi's experimental design method was used. Parameters selected in three levels and L9 from orthogonal robust array design were employed. Surface roughnesses of the deposits were measured using a stylus instrument. Scanning electron microscope and x-ray diffraction analysis were implemented to study surface morphologies and phase composition, respectively. Microhardness of the ENi-P deposits was measured using a microhardness tester at three trials... 

This paper concerns with the interfacial tension (IFT), wettability modification and adsorption behavior of a new plant-based surface active agent, Zizyphus Spina Christi, onto sandstone minerals which has been rarely attended in the available literature. Both kinetics and equilibrium adsorption data were obtained from batch mode tests. It was revealed that Freundlich isotherms matched better fit to the equilibrium data which implied that multilayer coverage of Zizyphus Spina Christi onto the sandstone particle surfaces was more likely to occur. Analysis of experimental kinetic data based on intraparticle diffusion model disclosed that the intraparticle diffusion mechanism is not the only... 

A large amount of the discovered oil reserves are reserved in carbonate formations, which are mostly naturally fractured oil-wet. Wettability alteration towards more water-wet state reduces the capillary barrier, hence improving the oil recovery efficiency in such reservoirs. In this study, wettability alteration towards favorable wetting state was investigated by combining modified low salinity brine with surfactant during water flooding. The diluted brine was modified by increasing the concentration of Mg2+ and SO4 2−, individually as well as both ions in combination. Different brine formulations were tested experimentally through the observations of contact angle measurements and... 

The modification of the surface wetting characteristics in fractured oil-wet carbonate reservoirs, by reversing wettability from oil-wet to water-wet, leads to improved oil recovery. However, in order to obtain a successful oil recovery process, it is crucial to understand the active mechanisms of wettability alteration. This study looks at the effect of sulfate ions as one of the most promising wettability influencing ions on the wetting properties of oil-wet calcite; the effect is studied both with and without the presence of cationic surfactant and possible mechanisms of wettability alteration are explored. A number of analytical techniques were utilized to analyze the mineral surface... 

The aim of this study is to simulate the self-assembly of the surfactant molecules with special chemical structure and bending stiffiness into bilayer membranes using a mesoscopic Dissipative Particle Dynamics (DPD) method. The surfactants are modeled with special chemical structure and bending stiffiness. To confirm that the novel model is physical, we determine the interaction parameters based on matching the compressibility and solubility of the DPD system with real physics of the uid. To match the mutual solubility for binary uids, we use the relation between DPD parameters and x-parameters in Flory-Huggins-type models. Unsaturated bonds can change the stiffiness of a lipid membrane,... 

Ni-TiN nanocomposite coatings were prepared by using electrochemical deposition in a Watt's bath containing TiN particles to increase the hardness of Ni. The effects of deposition current density, electrolyte agitation speed and the number of particles in the solution on the amount of incorporated particles in the coating process were investigated. The optimum deposition current density of 4 A dm-2 and agitation speed of 450 rpm were obtained. The effect of sodium dodecyl sulphate (SDS) anionic surfactant on the amount of particles in the coatings was investigated. It was observed that the maximum amount of incorporated particles, with a value of 7.5% by volume, was created in the current... 

Although alkaline-surfactant-polymer (ASP) flooding has proven efficient for heavy oil recovery, the displacement mechanisms and efficiency of this process should be discussed further in fractured porous media. In this study, several ASP flooding tests were conducted in fractured glass-etched micromodels with a typical waterflood geometrical configuration, i.e. five-spot injection-production pattern. The ASP flooding tests were conducted at constant injection flow rates but different fracture geometrical characteristics. The ASP solutions consisted of five polymers, two surfactants, and three alkaline types. It was found that using synthetic polymers, especially hydrolyzed polyacrylamide... 

This investigation is conducted on one of the southern Iranian oil fields, which experiences a fault on its gas cap. Therefore, no traditional gas injection and normal water injection for pressure maintenance is suggested. The target is set to inject special compatible and proper type of chemicals in each single well to avoid the pressure increase for the risk of oil and gas spill. Two different sources of aqueous phases, namely formation brine and sea water were used to find the effects of different brine composition on the main mechanisms of releasing the trapped oil, interfacial tension (IFT) and wettability alteration. The obtained results reveal that both the ionic liquid (IL) based... 

Changing the wettability of reservoir rock towards strongly water-wet state is effective way to enhance oil recovery from fractured carbonate reservoirs which are typically oil-wet. Regarding this fact, the injection of surfactant and the bacterial solution as EOR agents is proposed in the current work as a potential method to alter the wettability of rock surface reservoir. Nevertheless, there is a definite lack of experimental data regarding this method and the synergistic effect of both chemical and bacterial solutions on this process. In this study, the sole and combined effects of the bacterial solution using an Enterobacter cloacae strain as a biosurfactant-producer are compared with... 

A basic understanding of the activities of indigenous surfactants of crude oil at the water/oil interface as a function of aqueous phase pH can give us a better insight into the alkaline enhanced oil recovery processes. The present study aimed to elucidate the effect of salinity and crude oil type, specifically the influence of resin and asphaltene molecules during alkaline flooding through interfacial tension (IFT) measurements via pendant drop and spinning techniques. Several model oils containing asphaltene and resin fractions were prepared and their IFTs were compared with those of the original crude oils. Moreover, the elemental analyses of asphaltene and resin fractions were performed,... 

The present study aims at monitoring the bulk and bubble-scale behaviour of anionic polyacrylamide-sodium dodecyl sulphate stabilized foam in the absence and presence of oil. Dynamic stability tests provided results indicating that polymer increases the foam dynamic stability and decreases the drainage. Oil slows down the drainage rate of polymer-surfactant foam. In the absence of oil, foam is drained gradually/smoothly whereas remarkable fluctuations are evident in drainage graphs when oil is present. The Hele-Shaw cell was employed to conduct bubble-scale as well as statistical analyses on how foam texture is influenced by a polymer-surfactant system and hydrocarbon. Bubble-scale analyses,... 

The remediation of nonaqueous phase liquids (NAPLs) enhanced by surfactant and nanoparticles (NP) has been investigated in numerous studies. However, the role of NP-assisted surfactants in the dissolution process is still not well discussed. Besides, there is a lack of empirical dissolution models considering the effects of initial residual saturation Strap, NAPL distribution, and surfactant concentration in NAPL-aqueous phase systems. In this work, micromodel experiments are conducted to quantify mass transfer coefficients for different injected aqueous phases including deionized water, SDS surfactant solutions, and NP-assisted solutions with different levels of concentrations and flow... 

Metal-Organic Frameworks (MOFs) are a new class of crystalline microporous solids with superior properties compared to their inorganic counterparts that offer a great variety of properties. Fe-MIL-88A is a biocompatible MOF with a flexible structure that can be synthesized in various morphologies via different chemical methods. The present study proposes two efficient methods, namely, microemulsion and surfactant-assisted solvothermal method, to prepare Fe-MIL-88A nanorods with narrow size distribution and well-defined morphology. The morphology, crystalline and chemical structure of the prepared samples were studied using FESEM images, XRD patterns and FTIR spectra, respectively, and their... 

This work concerns the experimental investigation of surfactant alternating CO 2 injection in carbonate rocks. The core samples provided from a low-temperature fractured light oil reservoir, located in southwest Iran. The experiments were designed to observe the effect of CO 2-foam injection on gas mobility and oil recovery at different surfactant concentrations. The core samples were initially saturated with synthetic/field brine, 5,000 ppm, and then flooded with live oil to reach connate water saturation at reservoir condition, 115F and 1,700 psia. The commercial surfactant used was sodium lauryl sulfate as an anionic surfactant. The results of this work, along with field-scale simulation...