Sharif Digital Repository

Contrary to the widespread understanding, this paper shows by means of mathematics and numerics that a perfect power factor correction cannot be made at the load terminals only. To achieve a perfect power factor correction, the supply commitment is required as well. In the absence of such commitment, the power factor cannot reach unity unless we refine the very definition of power factor. But the refined power factor is then slightly higher than the conventional one. The refined expression for power factor is a function of the load parameters as well as the line characteristics. For an ideal power system (with no line losses), this coincides with the conventional formula. © 2008 IEEE  

In this study, a series of heteroatoms including nitrogen, oxygen, and sulfur were added to different positions of the model asphaltene structure to study the effect of the heteroatom presence in the self-aggregation of the model asphaltenes. Molecular Dynamics was used to calculate Solubility Parameters, Radial Distribution Function, and Relative Solubility Parameters. Additionally, Reactivity Parameters, Electrostatic Potential, Reduced Density Gradient, and Independent Gradient Model were calculated using the Density Functional Theory to further investigate the Molecular Dynamics results. This study indicated that heteroatoms' diversity and their positions in the model asphaltene... 

Appearances of specific transition patterns during data transfer in bus lines of modern high-performance computing systems, such as communicating structures of accelerators for deep convolutional neural networks, commercial Network on Chips, and memories, can lead to crosstalk faults. With the shrinkage of technology size, crosstalk faults occurrence boosts and leads to degradation of reliability and performance, as well as the increasing power consumption of lines. One effective way to alleviate crosstalk faults is to avoid the appearance of these specific transition patterns by using numerical-based crosstalk avoidance codes (CACs). However, a serious problem with numerical-based CACs is... 

As wind energy is becoming one of the fastest-growing renewable energy resources, controlling large-scale wind turbines remains a challenging task due to its system model nonlinearities and high external uncertainties. The main goal of the current work is to propose an intelligent control of the wind turbine system without the need for model identification. For this purpose, a novel model-independent nonsingular terminal sliding-mode control (MINTSMC) using the basic principles of the ultra-local model (ULM) and combined with the single input interval type-2 fuzzy logic control (SIT2-FLC) is developed for non-linear wind turbine pitch angle control. In the suggested control framework, the... 

As wind energy is becoming one of the fastest-growing renewable energy resources, controlling large-scale wind turbines remains a challenging task due to its system model nonlinearities and high external uncertainties. The main goal of the current work is to propose an intelligent control of the wind turbine system without the need for model identification. For this purpose, a novel model-independent nonsingular terminal sliding-mode control (MINTSMC) using the basic principles of the ultra-local model (ULM) and combined with the single input interval type-2 fuzzy logic control (SIT2-FLC) is developed for non-linear wind turbine pitch angle control. In the suggested control framework, the... 

In this paper, we study the downlink of cooperative Direct-Sequence Code Division Multiple Access (DS-CDMA) systems, where a set of Mobile Terminals (MT) cooperate with the purpose of improving their downlink communications reliability with Base Station (BS). For combating Multiple-Access Interference (MAI) as well as transferring complexity and spatial processing from the mobile terminals to the transmitter of BS, multiuser transmitter precoding is considered. In addition to multiuser precoding based on Minimum Mean-Square Error (MMSE) criterion for mitigating MAI, the proper transmission power control strategy under a fixed total power constraint is proposed and analyzed. Compared with... 

In this paper, we study the downlink of cooperative Direct-Sequence Code Division Multiple Access (DS-CDMA) systems, where a set of Mobile Terminals (MT) cooperate with the purpose of improving their downlink communications reliability with the Base Station (BS). For combating Multiple-Access Interference (MAI) as well as transferring complexity and spatial processing from the mobile terminals to the transmitter of BS, multiuser transmitter precoding is considered. In addition to multiuser precoding based on Minimum Mean-Square Error (MMSE) criterion for mitigating MAI, the proper transmission power control strategy under a fixed total power constraint is proposed and analyzed. Compared with... 

Formation of the amyloid beta (Aβ) peptide aggregations represents an indispensable role in appearing and progression of Alzheimer disease. β-sheet breaker peptides can be designed and modified with different amino acids in order to improve biological properties and binding affinity to the amyloid beta peptide. In the present study, three peptide sequences were designed based on the hopeful results of LIAIMA peptide and molecular docking studies were carried out onto the monomer and fibril structure of amyloid beta peptide using AutoDock Vina software. According to the obtained interactions and binding energy from docking, the best-designed peptide (D-GABA-FPLIAIMA) was chosen and... 

In a practical power system, automating all the substations is neither affordable nor economically justifiable. On the other hand, the trend for electric power subsidies elimination in some regions, such as Iran, aggravates this situation. To enhance the cost effectiveness of distribution automation system, this paper proposes a novel applicable qualitative-quantitative method using analytical hierarchical process (AHP) to find the optimum placement of remote terminal units (RTU). Entire attempt is to contribute all the crucial technical and practical parameters related to this problem in order to find the most reliable solution. Optimum number of RTUs is determined using the concepts of... 

Reliability evaluation of multiterminal HVDC systems has received very little attention in the past. This paper presents reliability modeling and analysis of an HVDC transmission system incorporating a voltage-sourced converter (VSC) tapping station. The use of VSC tapping stations enables the supply of power along the route to areas with comparatively little consumption. In this paper, a comprehensive detailed reliability model is developed and then converted to a manageable and computationally efficient model. Using this equivalent reliability model, various reliability indices are calculated at the load point of the system and the impacts of the VSC tapping station on these indices are... 

In this paper, we investigated phase synchronization in delayed dynamical networks. Non-identical spiking Hindmarsh-Rose neurons were considered as individual dynamical systems and coupled through a number of network structures such as scale-free, Erdos-Rényi, and modular. The individual neurons were coupled through excitatory chemical synapses with uniform or distributed time delays. The profile of spike phase synchrony was different when the delay was uniform across the edges as compared to the case when it was distributed, i.e., different delays for the edges. When an identical transmission delay was considered, a quasi-periodic pattern was observed in the spike phase synchrony. There... 

This paper discusses the dynamic behavior of the brushless doubly fed induction generator during the grid faults which lead to a decrease in the generator's terminal voltage. The variation of the fluxes, back EMFs, and currents are analyzed during and after the voltage dip. Furthermore, two alternative approaches are proposed to improve the generator ride-through capability using crowbar and series dynamic resistor circuits. Appropriate values for their resistances are calculated analytically. Finally, the coupled circuit model and the generator's speed and reactive power controllers are simulated to validate the theoretical results and the effectiveness of the proposed solutions. Moreover,... 

A major problem in real-time packet-based communication systems, is misrouted or delayed packets which results in degraded perceived voice quality. If packets are not available on time, the packets are considered as lost. The easiest solution in a network terminal receiver is to replace silence for the duration of lost speech segments. In a high quality communication system, to avoid degradation in speech quality due to packet loss, a suitable method or algorithm is needed to replace the missing segments of speech. In this paper, we introduce an adaptive filter for replacement of lost speech segment. In this method Kalman filter as a state-space based method will be used to predict the... 

A major problem in real-time packet-based communication systems, is misrouted or delayed packet which results in degraded perceived voice quality. If packets are not available on time, the packets are considered lost. The easiest solution in a network terminal receiver is to replace silence for the duration of lost speech segments. In a high quality communication system, to avoid degradation in speech quality due to packet loss, a suitable method or algorithm is needed to replace the missing segments of speech. In this paper, we introduce an adaptive filter for replacement of lost speech segment. In this method Kalman filter as a state-space based method will be used to predict the clean... 

A major problem in real-time packet-based communication systems, is misrouted or delayed packets which results in degraded perceived voice quality. If packets are not available on time, the packets are considered as lost. The easiest solution in a network terminal receiver is to replace silence for the duration of lost speech segments. In a high quality communication system, to avoid degradation in speech quality due to packet loss, a suitable method or algorithm is needed to replace the missing segments of speech. In this paper, we introduce an adaptive filter for replacement of lost speech segment. In this method Kalman filter as a state-space based method will be used to predict the clean... 

UHMWPE composite materials are increasingly used in armors design due to their high strength-to-weight ratios and energy absorption capacities. In this study the effect of production parameters upon the terminal ballistic properties of UHMWPE composite were examined under different conditionings. The composite armor plate laminates were produced by hot pressing with three different pressing times from 10-30 minutes and the laminates conditioned at +115, +125, and +135°C. The molding temperature of SK66 fiber composite has the main direct effect on the ballistic absorption energy, so the relation of molding temperature with the adhesive bonding force between layers, the thickness of the... 

Bus network design is an important problem in public transportation. In practice, some parameters of this problem are uncertain. We propose two models for the bus terminal location problem with fuzzy parameters. In the first formulation, the number of passengers corresponding to each node is a fuzzy number. In the second formulation, an additional assumption of fuzzy neighborhood is considered. These problems being NP-hard, we use a genetic algorithm (GA) and a simulated annealing (SA) algorithm for solving them. We also propose an idea to hybridize these algorithms. In our hybrid algorithm, SA is applied as a neighborhood search procedure of GA on the best individual of the population,... 

So far, the need for power systems to be control automated has been approached. Moreover, the advent of smart technological infrastructures calls for a more systematic and well-designed schemes for data acquisition process. Hence, Remote Terminal Units (RTUs) are going to be considered as a crucial part of smart grid puzzle in power distribution systems. This paper aims to present a novel practical approach to have the RTU placement dilemma unraveled in power distribution systems. Practically approaching in this paper, some pragmatic factors of major importance in this respect are introduced. A framework with which the utility's experts' knowledge could be efficiently exploited is presented... 

In this paper, a low order recursive linear prediction method and recursive least square as an adaptive filter (LP-RLS) are introduced to predict the speech and the excitation signals. In real-time packet-based communication systems, one major problem is misrouted or delayed packets which results in degraded perceived voice quality. If packets are not available on time, the packet is known as lost packet. The easiest task of a network terminal receiver is to replace silence for the duration of lost speech segments. In a high quality communication system, to avoid quality reduction due to packet loss, a suitable method and/or algorithm is needed to replace the missing segments of speech. The...