Sharif Digital Repository

In this paper, a fully coupled three-dimensional dynamic analysis is carried out to investigate the dynamic behavior of pile foundations in liquefied ground. A critical state bounding surface plasticity model is used to model soil skeleton, while a fully coupled (u- P) formulation is employed to analyze soil displacements and pore water pressures. Furthermore, in this study, variation of permeability coefficient during liquefaction is taken into account; the permeability coefficient is related to excess pore water pressure ratio. Results of a centrifuge test on pile foundations are used to demonstrate the capability of the model for reliable analysis of piles under dynamic loading. Then, the... 

In this work, a three-dimensional model has been proposed to predict temperature distribution and weld-pool shape during dissimilar arc welding of low-carbon steel (CK4) and ferritic stainless steel (AISI 409). The model has been developed using the finite-element software ANSYS, while in the analysis, the effects of process parameters, as well as dilution, in the weld pool have been considered. To verify the predictions, welding experiments were conducted under different welding conditions, and the model results were then compared with the measured weld-pool geometry; a reasonable consistency was observed  

In the present research, the effect of residual stress distribution on the static strain aging (SSA) phenomenon in cold rolled steel was investigated. A three-dimensional model was employed to evaluate the residual stress distributions within the rolled strips, and hole drilling experiments were also performed to verify the data obtained from the mathematical model. Hardness and tensile tests were then performed on the cold rolled samples at different temperatures and aging periods, and the results of these tests were utilised to assess SSA behaviour after different rolling programs. The results show that SSA occurs within the cold rolled steel in the employed aging period, and its kinetics... 

In this study, static strain aging behaviour of cold rolled steel strips was considered with emphasis on the distribution of residual hydrostatic stress developed during temper rolling. In order to assess residual stress distribution produced by the temper rolling, a three-dimensional model was first employed. Then, samples were rolled at a reduction of 4% under single and double pass rolling programmes and the kinetics of static strain aging phenomenon as well as the required activation energies were then evaluated using hardness and tensile tests on the deformed samples. Considering the predicted residual hydrostatic stress distribution, it was found that tensile hydrostatic stresses... 

In this research, thermo-mechanical behavior and microstructural events in dissimilar friction stir welding of AA6061-T6 and AA5086-O have been evaluated. The thermo-mechanical responses of materials during the process have been predicted employing a three-dimensional model together with a finite element software, ABAQUS. Then, mechanical properties and microstructures of the weld zone were studied with the aid of experimental observations and model predictions. It is found that the mixing of material in the weld nugget is performed more efficiently when AA5086 is in the advancing side and also the temperature field is distributed asymmetrically resulting in larger thermally affected region... 

The Endurance Time (ET) method is a time history-based dynamic analysis procedure which uses special intensifying acceleration functions for evaluation of the seismic response of structures. One of the potential applications of the ET method is in the three-dimensional analysis of buildings under multidirectional excitations. In this paper, considering horizontal components of excitation, an algorithm for the multi-component analysis of building structures by the ET method is proposed, and results of the ET method for various steel moment frames with 1 to 7 stories are compared with results from time history analysis with real earthquakes. Results show that based on recommendations of... 

Embryogenesis, regeneration and cell differentiation in microbiological entities are influenced by mechanical forces. Therefore, development of mechanical properties of these materials is important. Neural network technique is a useful method which can be used to obtain cell deformation by the means of force-geometric deformation data or vice versa. Prior to insertion in the needle injection process, deformation and geometry of cell under external point-load is a key element to understand the interaction between cell and needle. In this paper the goal is the prediction of cell membrane deformation under a certain force, and to visually estimate the force of indentation on the membrane from... 

In this paper, the continuum damage mechanics model originally proposed by Lemaitre (Journal of Engineering Materials and Technology. 1985; 107: 83-89) is presented through an adaptive finite element method for three-dimensional ductile materials. The macro-crack initiation-propagation criterion is used based on the distribution of damage variable in the continuum damage model. The microcrack closure effect is incorporated to simulate the damage evolution more realistic. The Zienkiewicz-Zhu posteriori error estimator is employed in conjunction with a weighted Superconvergence Patch Recovery (SPR) technique at each patch to improve the accuracy of error estimation and data transfer process.... 

In poorly developed fractured rocks, the contribution of individual fracture on rock conductivity should be considered. However, due to the lack of data, a deterministic approach cannot be used. The conventional way to model discrete fractures is to use a Poisson process, with prescribed distribution, for fracture size and orientation. Recently, a stochastic approach, based on the idea that the elastic energy due to fractures follows a Boltzmann distribution, has been used to generate realizations of correlated fractures in two dimensions. The elastic energy function has been derived by applying the appropriate physical laws in an elastic medium. The resulting energy function has been used... 

In this study, the main objective is to develop a one dimensional model to predict design and off design performance of an operational axial flow compressor by considering the whole gas turbine assembly. The design and off-design performance of a single stage axial compressor are predicted through 1D and 3D modeling. In one dimensional model the mass, momentum and energy conservation equations and ideal gas equation of state are solved in mean line at three axial stations including rotor inlet, rotor outlet and stator outlet. The total to total efficiency and pressure ratio are forecasted using the compressor geometry, inlet stagnation temperature and stagnation pressure, the mass flow rate... 

We investigate the effect of particle shape on the transportation mechanism in well-drilling using a three-dimensional model that couples computational fluid dynamics (CFD) with the discrete element method (DEM). This numerical method allows us to incorporate the fluid-particle interactions (drag force, contact force, Saffman lift force, Magnus lift force, buoyancy force) using momentum exchange and the non-Newtonian behavior of the fluid. The interactions of particle-particle, particle-wall, and particle-drill pipe are taken into account with the Hertz-Mindlin model. We compare the transport of spheres with non-spherical particles (non-smooth sphere, disc, and cubic) constructed via the... 

The effectiveness of secondary recovery methods in reservoir development studies depends on the knowledge about how fluid-carrying regions (i.e. good-quality rock types) are connected between injection and production wells. To estimate reservoir performance uncertainty, comprehensive simulations on many reservoir model realisations are necessary, which is very CPU consuming and time demanding. Alternatively, we can use much simpler and physically based methods such as percolation approach. Classic percolation assumes connectivity between opposite 2-D faces of a 3-D system; whereas, hydrocarbon production is achieved through active wells that are one-dimensional lines (e.g. vertical,... 

In this work, hybrid of silica nanoparticles (NPs) with sulfonated copolymer has been prepared in order to improve the copolymer properties for Enhanced Oil Recovery (EOR). Some tests are done to find the effectiveness of injecting fluid on Recovery Factor (RF), such as Contact Angle (CA), interfacial tension (IFT), inherent viscosity, and eventually Micro-Model (MM) flooding. In CA test, wettability alteration from Oil-Wet (OW) to Water-Wet (WW) is reached by sedimentation and adsorption of NPs on the rock slice. In addition, IFT reduction is obtained by increasing the NaCl concentration. The viscosity change is investigated for the hybrid and copolymer under simulated high-temperature oil... 

This paper studies through numerical simulation a practical compound restrainer to use for the improvement of seismic performance of bridges. A mechanical model has been introduced for the restrainer and a basic optimisation approach has been conducted to evaluate the performance of the restrainer to changes in the properties of its components. A real 2-span simply supported plate girder bridge has been selected for case study. Using a detailed three-dimensional model, several non-linear time history analyses were performed under seismic excitations in order to assess the performance of the bridge retrofitted by conventional restrainers including linear and non-linear viscous dampers on one... 

Physicians use charts that are prepared by experiments on animals or humans to prescribe drug dosage for patients. This method requires some precious amount of time by the Ministry of Health to approve new drugs to be used in healthcare centers. Three-dimensional modeling of the inner medulla by considering the known physiological features help us to predict the distribution of a drug or any minerals in the kidney. In this study we present modeling of the important species distribution including Na+ and urea in the rat inner medulla that influence the urine concentrating mechanism. We use a C++ code to develop the inner medulla geometry based on physiological data to better capture the... 

In this article, we propose a three-dimensional model of a low-Reynolds-number swimmer that consists of three small spheres connected to a larger sphere via three perpendicular adjustable rods which enable the micro robot to swim along arbitrary trajectories. Then we focus on dynamic modelling of the swimmer and propose a control method to control the position of the micro swimmer in a low Reynolds number flow. The control aim intended in this article is that the middle sphere to follow a desired trajectory and respective simulation results from control indicates successful accomplishment in application. © 2018 IEEE