Sharif Digital Repository

Preciseness and finished surface quality are the significant factors of final products, especially in a number of drilling processes. Burr is usually considered a negative outcome in assembly procedures. One way to reduce or remove burr and improve surface roughness in metal cutting is to employ ultrasonic vibration in the drilling process. In this paper, the effects of ultrasonic vibration on burr size reduction, drilling force and surface roughness with two different vibration systems are investigated. To this end, two vibration structures were built, one to excite the workpiece (the workpiece vibration system) and the other to vibrate the tool (the tool vibration system). Besides, the... 

Today, structural Health monitoring is a major concern in the engineering community. Multisite fatigue damage, hidden cracks and corrosion in hard-to-reach locations are among the major flaws encountered in today's extensive diagnosis and/or prognosis of aircraft structures. Ultrasonic waves, lamb waves are particularly advantageous because of their propagation at large distances with little damp in thin-wall structures. In this paper a new rectangular shape array of embedded piezoelectric sensors is developed to detect some damages in large planar structures. An artificial neural network is trained to identify the damage state and its location. Output signals of each sensor due to various... 

This work is concerned with the monitoring of ultrasound effects on inhibition, as well as the reversible kinetics modeling of asphaltene flocculation in toluene-n-alkane systems, which has been rarely reported in the literature. A crude oil sample was exposed to ultrasound waves, and then the colloidal structural evolutions of flocculated asphaltene particles induced by addition of n-alkane were studied, using a confocal microscopy. Observations confirmed that radiation of ultrasound can change the irreversibility of asphaltene flocculation in crude oil. To interpret the kinetics of asphaltene flock aggregation, the Smoluchowski model was used, and the time dependent size distribution of... 

Cost-effective and reliable damage detection is critical for utilization of composite materials. This paper utilizes PZT piezoelectric disks to excite the first symmetric Lamb wave (S0 mode). The interaction of Lamb wave mode with a through-thickness crack of different lengths and angles in [0/45/-45/90]s CF/EP laminate plates is analyzed in terms of finite element method. This study contributes to the damage detection by developing an improved wavelet-based signal processing technique that enhances the visibility and interpretation of the Lamb wave signals related to defects. Based on the amount of energy dissipated by the damage, a damage index is defined as the function of an electric... 

In conventional grinding of hard to cut materials such as Ti6Al4V alloys, surface burning, redeposition and adhesion of chips to the grinding wheel and workpeice occur visibly unless it is carried out at low speeds and with high volume of cutting fluid. Ultrasonic assisted grinding is an efficient machining process which improves the machinability of hard-to-cut materials by changing the kinematics of the process. In this research, the effect of imposition of ultrasonic vibration on the grinding of Ti6Al4V alloy is studied. Longitudinal vibration at ultrasonic frequency range (20 kHz) is applied on the workpiece and machining forces and surface roughness are compared between conventional... 

Crack detection by Piezoelectric Wafer Active Sensors (PWAS) is one of the emerging methods of Non-destructive Evaluation (NDE). These sensors can assess the health state of the structure in far filed through the analyzing the high frequency Lamb wave propagation. As PWAS is the essential part of this method, simulation and modeling of these sensors and their interaction with the host structure, strongly affect the accuracy of results. In this study, unlike the previous works, in which some certain areas of the host structure were considered as a sensor and actuator, the direct simulation of electro-mechanical interaction of the PWAS and the host structure is modeled among modeling the PWAS... 

This work concerns with experimental and analytical investigation of role of ultrasonic wave radiation in relative permeability of both wetting and non-wetting phases in a free gravity drainage process in porous media under the influence of ultrasonic wave. Glass beads ranged from 70 to 100 mesh sizes were packed and used in the tests. The working fluids consist of distilled water, kerosene and Doroud and Paidar crude oils as wetting and air as non-wetting phase. The measured oil recovery data along with Hagoort (1984) backward methodology were used to determine and to compare the relative permeability of wetting phases in presence and absence of ultrasonic radiation. In addition, the... 

A lot of laboratory experiments have been carried out to investigate each aspect of ultrasonic wave s role on fluid flow behavior through porous media. Despite all experimental works, little attention has been paid for modeling the ultrasonic wave influence on capillary imbibition, which is the main mechanism of production in fractured reservoirs. At this work the process of imbibition with and without applying ultrasonic waves is mathematically modeled by modification of piston-like model. In contrast to this model s assumption, in which mobility ratio is assumed to be constant, here permeability variation due to increase in water saturation is considered in numerical solution. To evaluate... 

In recent years, new Structural Health Monitoring (SHM) methodologies with a concept of "instantaneous baseline damage detection" are being developed by many researchers. In this context, this paper uses a new method to identify multiple damage in the aluminum plate. For this goal use from spars PZWS sensor network to generate and received guided waves. Ultrasonic waves are generated and measured from all possible different pairs of excitation and sensing transducers. For feature extraction of received signals used from continues wavelet transform. A probabilistic damage diagnostic algorithm based on correlation analysis was investigated to locate single or multiple damages. In this study,... 

Today, many limitations are faced in sludge treatment and disposal. Therefore evaluation of different approaches to reduce sludge production in the activated sludge process has attracted great attention. Application of ultrasonic waves in sludge treatment caused to reduce sludge volume and accelerate sludge digestion. This research intended to study the efficiency of ultrasound in dewatering biological sludge in wastewater treatment plants under different conditions. In this study, response surface method was used to investigate results and optimum conditions were determined. Sludge was treated in different conditions as follows: 330–920 W ultrasound power, 1.5–3.9 L sample volume and... 

This study presents a new approach for designing optimal sensors layout based on accuracy of defect mapping. It is obtained from combination of the reference-free damage detection technique and the probability-based diagnostic imaging method. Considering damage indices based on continuous wavelet transform of sensors signals, the core of this study involves with development of a database of continuous wavelet transform features of a crack. In fact, the database contains the data from 594 different states in crack positions, orientations, and the considered sensing path lengths. Eventually, this database is used for localization of damage by interpolating the stored data collected from the... 

The effects of severe plastic deformation on properties of AA1100 and AA2024 including the ultrasound velocity and the shear strength during multi-axial compression (MAC) are studied. Additionally, optical microscopy, scanning electron microscopy, and X-ray energy-dispersive spectroscopy are utilized. For both AA1100 and AA2024, an opposite trend is reported in the shear strength and the sound velocity versus deformation strain of MAC. At high strain range, AA1100 and AA2024 samples reach a plateau in the strength due to the occurrence of dynamic recovery. On the other hand, the sound velocity is shown to decrease 11% and 15% for AA1100 and AA2024, respectively. Furthermore, the... 

Structural health monitoring (SHM) has been adopted in the aircraft and civil industries over the last two decades. The ultrasonic guided wave propagation technique is a promising damage detection approach in airplane thin wall structures because of their long distance traveling ability and low attenuation. In fact, by efficiently designing the pattern of sensors one can effectively pick up the changes that happen in propagated signals due to presence of any kind of structural damage. This detection approach could be effectively assisted by numerical simulation techniques like finite-element modeling. To obtain a damage detection algorithm based on instantaneous baseline data, the... 

In this paper, a novel method which has been proposed during the last decade for increasing of the permeability of porous media of petroleum reservoirs by transferring of energy via ultrasound waves is investigated numerically. Increasing of permeability of porous media of petroleum reservoirs results in enhancing of oil recovery. This technique is based on the idea of transferring of energy to the liquid filled porous media via the ultrasound waves and consequently producing of pulsating vapor bubbles. The generated vapor bubbles transfer the energy of ultrasound waves in the liquid filled passages of a porous medium through velocity and pressure fields in the liquid domain and in turn... 

In the present research, ultrasonic-assisted emulsification-microextraction (USAEME) coupled with gas chromatography-mass spectrometry (GC-MS) has been proposed for analysis of thirteen environmental protection agency (EPA) polycyclic aromatic hydrocarbons (PAHs) in aqueous samples. Tetrachloroethylene was selected as extraction solvent. The main parameters of USAEME affecting the efficiency of the method were modeled and optimized using a central composite design (CCD). Under the optimum conditions (9 μL for extraction solvent, 1.15% (w/v) NaCl (salt concentration) and 10min for ultrasonication time), preconcentration factor (PF) of the PAHs was in the range of 500-950. In order to have a... 

This work concerns with experimentally and analytically investigation of free gravity drainage process in porous media under the influence of ultrasonic wave radiation. Glass beads ranges from 70 to 100 mesh sizes were packed and used in the tests. The working fluids consist of distilled water, kerosene and Doroud and Paidar crude oils as wetting and air as non-wetting phase. The measured oil recovery data along with Hagoort (1984) backward methodology were used to determine and to compare the relative permeability of wetting phases in presence and absence of ultrasonic radiation. In addition the relative permeability of non-wetting phases for both cases were calculated from inverse modeling... 

Nonlinear ultrasound modeling is finding an increasing number of applications in both medical and industrial areas where due to high pressure amplitudes the effects of nonlinear propagation are no longer negligible. Taking nonlinear effects into account makes the ultrasound beam analysis more accurate in these applications. One of the most widely used nonlinear models for propagation of 3D diffractive sound beams in dissipative media is the KZK (Khokhlov, Kuznetsov, Zabolotskaya) parabolic nonlinear wave equation. Various numerical algorithms have been developed to solve the KZK equation. Generally, these algorithms fall into one of three main categories: frequency domain, time domain and...