Sharif Digital Repository

This paper proposes a straightforward control method for voltage control of a three-phase transformer-based inverter in uninterruptible power supplies or distributed generation systems. The approach offers a dual-loop design consisting inner current control loop and outer voltage loop. Sliding mode current controller provides desired bandwidth for voltage controller which consists of a state feedback term for stabilization and resonant term for harmonic damping. The proposed scheme provides fast dynamic response and low total harmonic distortion even for high power inverters with the limitations of switching frequency and LC filter components. Experimental studies for 2KVA linear and... 

Control of three phase inverters is of paramount importance in the realm of control applications. In this regard, this paper proposes active disturbance rejection control (ADRC) scheme as a new method for voltage control of three phase inverters in UPS applications. The main advantage of ADRC refers to the fact that it is model independent. In this paper, the controller is composed of a double loop structure including an inner current loop and outer voltage loop. This structure is used in a three phase inverter in order for implementation of voltage control. To draw a comparison between ADRC and PI as the common control method, a case study has been simulated in SIMULINK. Simulation results... 

This paper presents a new nonlinear voltage control strategy based on backstepping control and a high-order sliding mode differentiator for an islanded microgrid. The microgrid consists of multiple distributed generation (DG) units with an arbitrary configuration that can be parametrically uncertain or topologically unknown. The proposed controller robustly regulates the microgrid voltages in the presence of parametric uncertainties, unmodeled dynamics, load imbalances, and nonlinear loads with harmonic/interharmonic currents. In contrast to existing methods, the controller does not need to know the frequency of harmonic and interharmonic current of microgrid loads that lead to the reduction... 

Voltage unbalance and short circuits in distribution networks adversely affect the performance of grid-tied voltage source inverters (VSIs). Consequently, the dc-link voltage ripple may significantly increase leading to operation of VSI in an unsatisfactory manner. Conventionally in order to maintain the negative sequence current under unbalanced conditions, low-pass/trap filter in the current control loop are required which significantly reduce the controller bandwidth. In order to minimize the dc-link voltage ripple without impairing the controller bandwidth, this paper investigates the design and performance of Proportional-Integral-Resonant (PIR) controller in improving the performance... 

This paper proposes an enhanced hybrid modular multilevel converter (MMC), which utilizes a combination of halfbridge submodules (HBSM) and at least one full-bridge submodule (FBSM). In the proposed structure, FBSMs work with half of the HBSMs nominal voltage in each arm. Due to the presence of FBSMs, HBSMs switching frequency drops significantly, which reduces the converter power loss compared to half-bridge based MMCs. Furthermore, because of redundant FBSMs, (2N+1)-modulation can be employed to generate the output voltage without increasing the circulating current, thus the converter performance is improved notably. Besides, with the redundant FBSMs the converter can continue its... 

The nature of molecular transmitter imposes some limitations on the molecule production process and its storage. As these molecules act the role of the information carriers, their limitation affect the transmission process and the system performance considerably. In this paper, we focus on these limitations at the transmitter, the limited production rate and finite storage capacity. We consider a time-slotted communication where the transmitter opens its outlet and releases the stored molecules for a time duration to send bit '1' and remains silent to send bit '0'. By changing the duration molecules are released, we propose an adaptive pulse-width modulation. The objective is to find the... 

Medium power distributed energy resources (DERs) are commonly connected to medium voltage distribution systems via voltage source converters (VSCs). Several guidelines and standards have been developed to establish the needed criteria and requirements for DERs interconnections. In this respect, it is preferred to reinforce the VSC fault ride through (FRT) capability, which considerably minimizes the DG outage period and reconnection time and results in a resilient system against short circuits. Considering the significant number of asymmetrical faults in distribution systems, the VSC response in such conditions must be investigated, and consequently, its FRT capability must be reinforced. In... 

Due to the technical advances in power electronic industry, employing inverter-based distributed energy resources (IBDERs) are increased in electric power systems. Distributed generators (DGs) with the rating capacity of few megawatts are commonly connected to the distribution level of power systems which are inherently unbalanced. A cluster of IBDERs and loads form a small-scale grid called microgrid (MG) which can operate independent of the main grid. In a MG, grid forming voltage source converters (VSCs) are used to control the voltages and frequency of the MG. However, grid forming VSCs with conventional control schemes cannot do this task properly when the MG is unbalanced. In this... 

In this paper, a novel droop approach for autonomous power management in low voltage DC (LVDC) microgrids based on a master-slave concept is presented. Conventional voltage-based droop approaches suffer from poor power sharing due to line resistance effects on a virtual resistance, which is solved by introducing a communication system to increase the current sharing accuracy. In this paper, a virtual frequency is superimposed by the master units, and slave units determine their output power according to the corresponding frequency-based droop characteristics. Unlike the voltage-droop methods, the proposed virtual frequency-droop approach can be applied for proportional power management among... 

In trasformerless grid-connected photovoltaic (PV) systems, common-mode voltage (CMV) fluctuations cause leakage current flow through the stray capacitance of the PV panels. Shoot-through states in a quasi-Z-source inverter (q-ZSI) increase the amplitude of high-order harmonics of CMV. In this paper, by using the modulation technique based on odd pulse width modulation and minor change in the Z network of the three-phase q-ZSI, the leakage current is blocked. No extra semiconductor element is added. By the proposed technique, CMV is kept nearly constant during switching cycles. The experimental results for CMV analysis in a 1kW prototype are presented to verify the theoretical analysis. ©... 

This paper proposes a novel distributed noise-resilient secondary control for voltage and frequency restoration of islanded microgrid inverter-based distributed generations (DGs) with an additive type of noise. The existing distributed methods commonly are designed as secondary control system systems that operate on the assumption of ideal communication networks among DGs. However, the channels are prone to stochastic noise, whereas each DG obtains noisy measurements of the states of its neighbors via environmental noises. The existing distributed noise-resilient methods, ignore a complete model of the system. In contrast, this paper proposes consensus protocols that take into account both... 

This paper proposes a new framework for corrective voltage control (CVC) of power systems. It ensures a desired loading margin (LM) after encountering severe contingencies while minimizing the corresponding control costs. The framework is divided into primary corrective voltage control (PCVC) and secondary CVC (SCVC) stages for restoration of voltage stability and ensuring a desired LM. These stages are based on the sequence and quickness of the control actions required in post-contingency state of the system. The PCVC sub problem deals with the condition faced by a power system subject to voltage instability as the result of severe contingencies. Such control is merely devised to restore... 

In this paper, a single-inductor dual-output (SIDO) DC/DC converter is proposed. The significant feature of the proposed converter is feeding a constant power load in low voltage side (LVS) port, where even feeding a variable load at LVS doesn't have any cross regulation to high voltage side port with the desired approximation. Magnificently, both merits are obtained in open-loop manner which is an outstanding characteristic in comparison with existed converters. In this paper, soft commutation and soft switching of switches and diodes are investigated along with the aforementioned main novelty. Moreover, detailed theoretical analyses of the proposed SIDO DC/DC converter in continuous... 

In this paper, a new approach based on hybrid Particle Swarm-Based-Simulated Annealing Optimization technique (PSO-B-SA) is proposed for solving under-voltage load shedding (UVLS) problem. Under-voltage load shedding (UVLS) is one of the most important tools for avoiding voltage instability. In this paper, the UVLS problem is formulated based on the concept of the static voltage stability margin and its sensitivity at the maximum loading point or the collapse point. The voltage stability criterion is modeled directly into the load-shedding scheme. In any UVLS scheme finding the global point is very important for having cost effective economy. The proposed PSO-B-SA methodology is implemented... 

A multi-band CMOS LC Quadrature Voltage Control Oscillator (QVCO) with minimum power consumption is developed to meet the phase noise and frequency band requirements of RFID, Zigbee and Bluetooth standards. To accomplish the multi-band receiving architecture at low power consumption, current switching technique with optimized cross-coupled transistor sizes has been used. A comprehensive analysis of small signal model for complementary architecture including transistor noise sources and their effects on output phase noise amount has been discussed. Using extracted small signal model, coupled and coupling transistor sizes for minimum power consumption and the least achievable phase noise have... 

In this study, a new isolated high-gain switched-boost DC/DC converter employing two symmetrical switched-boost networks along with a modified control algorithm based on the combination of the pulse-width modulation (PWM) and phase-shift modulation is proposed. Utilising symmetrical switched-boost networks increase the voltage gain of the proposed converter, significantly. Moreover, applying the proposed switching algorithm on the proposed isolated switched-boost DC/DC converter leads to the following advantages: (i) high-voltage gain, (ii) zero voltage switching (ZVS) turn-on of two switches, (iii) ZVS turnoff of two switches and (iv) appearing three controllable parameters (the... 

Medium power distributed energy resources (DERs) are commonly connected to medium voltage distribution systems via voltage source converters (VSCs). Several guidelines and standards have been developed to establish the needed criteria and requirements for DERs interconnections. In this respect, it is preferred to reinforce the VSC fault ride through (FRT) capability, which considerably minimizes the DG outage period and reconnection time and results in a resilient system against short circuits. Considering the significant number of asymmetrical faults in distribution systems, the VSC response in such conditions must be investigated, and consequently, its FRT capability must be reinforced. In... 

This paper proposes an adaptive droop characteristic to enhance the superimposed droop frequency scheme for the control of DC microgrids. Conventional superimposed droop frequency scheme solves the poor current sharing and undesirable voltage regulation issues in DC microgrid. However, this method suffers from two main problems which are (i) instability in terms of load variation due to the limitation in transferrable reactive power, and (ii) poor voltage quality caused by the injected AC voltages in the DC system. In this paper, an adaptive droop characteristic is proposed to decrease the transferred reactive power and mitigate system overall voltage quality, and its performance is verified... 

This paper proposes a new framework for corrective voltage control (CVC) of power systems. It ensures a desired loading margin (LM) after encountering severe contingencies while minimizing the corresponding control costs. The framework is divided into primary CVC (PCVC) and secondary CVC (SCVC) stages for restoration of voltage stability and ensuring a desired LM. These stages are based on the sequence and quickness of the control actions required in post-contingency state of the system. The PCVC sub problem deals with the condition faced by a power system subject to voltage instability as the result of severe contingencies. Such control is merely devised to restore system stability. Next,... 

In this paper, reliability of conventional pulse width modulation buck-boost converter is analyzed, where the effects of duty cycle, input voltage, output power, voltage gain and time duration are evaluated. These analyses are performed in both continuous and discontinuous conduction modes and Markov process model is utilized to obtain the results. In addition, mean time to failure of this converter is obtained with respect to the aforementioned parameters. In this paper, detailed analyses of reliability in buck-boost converter with different evaluation parameters are presented. Moreover, the plots of MATLAB software are prepared to have complete evaluation in each operating state