Sharif Digital Repository

PbS on Pb thin film (Pb/PbS) was deposited on conductive glass (CG) substrate (CG/Pb/PbS) using electrochemical techniques to investigate the Schottky junction in solution. The CG/Pb/PbS electrode was investigated by different techniques based on thermionic emission theory. Electrochemical cell consisted of the CG/Pb/PbS as a working electrode in an alkaline solution showed character of the Schottky junction. Reduction and oxidation of H2O on the CG/Pb/PbS electrode were enhanced under illumination. Water photo splitting is the main process. Study of linear sweep voltammetry at around open circuit potential (OCP) allowed proposing a model based on the Schottky junction which is charged at... 

The voltammetric performance of edge-plane pyrolytic graphite (EPG) electrode via adsorptive stripping voltammetry was investigated for study of the electrochemical behavior of omeprazole (OMZ) in aqueous solution. The results revealed that the oxidation of OMZ is an irreversible pH-dependent process that proceeds with the transfer of one electron and one proton in an adsorption-controlled mechanism. The determination conditions, such as the pH values of the supporting electrolyte, accumulation time and scan rate were optimized. Simplicity, high reproducibility and low detection limit (3 nM) of the electrode response as well as wide linear range (0.01 to 4.0 µM) can be stated as significant... 

The electrodeposition of cobalt, nickel and Ni-Co alloys was studied by electrochemical techniques. Cyclic voltammetry and current transient measurements were used to characterize the Co-Ni system in other to obtain the nucleation and growth mechanism. The cyclic voltammetry results clearly showed that electrodeposition of cobalt, nickel and Co-Ni alloy is diffusion-controlled process with a typical nucleation mechanism. The redox potentials of the Co and Ni are shifted to more cathodic potentials in the Co-Ni alloy system. In addition, the current transients revealed that nucleation mechanism is instantaneous with a typical three-dimensional (3D) nucleation and growth process. The number of... 

A carbon-paste electrode (CPE) is modified by incorporating cobalt-5-nitrosalophen (CoNSal) and tetraoctylammonium bromide (TOAB). The mechanism of electrocatalytic oxidation of dopamine (DA) and ascorbic acid (AA) at the surface of the CoNSal-modified CPE containing various percents of TOAB is thoroughly investigated by cyclic and differential pulse voltammetry. In solutions of pH 5.0, in which all studies are performed, DA exists as the positively charged species whereas AA is mainly as the neutral form. Therefore, the favorable ionic interaction (electrostatic repulsion) between the cationic form of DA and the cationic surfactant (TOA+) caused increasing the overvoltage for DA and... 

The electrodeposition of cadmium is studied by electrochemical techniques with the presence of the organic agents. The cyclic voltammetry results clearly show that the electrodeposition of cadmium is a diffusion-controlled process associated with a typical nucleation process. With addition of the thiourea, 3-Picolin and benzyl alcohol organic agents simultaneously in sulfate solution, the redox potential of cadmium is shifted to more negative potentials. In this case, the current transients reveal an instantaneous nucleation with a typical three-dimensional (3D) growth mechanism, while it shows progressive nucleation mechanism without the ternary-species organic agents. In addition, the... 

A series of previously reported mononuclear Cu(II) and homodinuclear Cu(II)Cu(II) complexes, as well as, novel mononuclear Cu(II), homodinuclear Cu(II)Cu(II), and heterodinuclear Cu(II)Ni(II) complexes of a phenol-based dinucleating ligand with two different N(amine)2O2 and N(imine)2O2 coordination sites, were synthesized and characterized by elemental analyses, infrared and electronic absorption spectroscopies and conductivity measurements. The electrochemical behavior and catecholase-like activity of the complexes were also studied using cyclic voltammetry and UV-vis spectrophotometry, respectively. Our results show that the dinuclear complexes are more effective catalysts in the oxidation... 

Cyclic voltammetry, j-t transients and transient time measurements have been used to characterize the Au-Ni alloy deposition and to obtain the nucleation and growth mechanism. The electrodeposition of gold, nickel and gold-nickel alloys was studied in cyanide-citrate electrolytes. The analysis of the voltammograms and j-t transients clearly shows that deposition of the Au and hence, of Au-Ni alloys, is affected by adsorbed cyanide ligands mainly at low overpotentials and a direct reduction occurs at high overpotentials. In this case, the Au deposition is kinetically favored, while the Ni deposition is controlled by the cyanide-citrate adsorbed adlayer. In an alloy electrolyte, the Au and Ni... 

The screen-printed gold electrode (SPGE) modified with the formation of self-assembly monolayer (SAM) of cysteine (Cys) on gold-nanoparticles (Au nano) was utilized for rapid and simultaneous determination of tetracycline and cefixime antibiotics by square wave voltammetry (SWV). Electrochemical investigation and characterization of the modified electrode was achieved using cyclic voltammetry (CV) and scanning electron microscopy (SEM). A principal component artificial neural network (PCANN) with three layer back-propagation network was utilized for the analysis of the voltammogram data. It is possible to simultaneously determine the tetracycline and cefixime concentrations in the ranges of... 

A simple electrodeposition method is employed to construct a thin film modifier of palladium-gold nanoparticles (Pd-AuNPs) decorated multi-walled carbon nanotube (MWCNT) on the surface of glassy carbon electrode (GCE). Morphology and property of Pd-AuNPs-MWCNT have been examined by scanning electron microscopy (SEM) and energy dispersive spectroscopy (EDS). Electrochemical performance of Pd-AuNPs-MWCNT/GCE for detection of ceftazidime (CFZ) has been investigated by cyclic voltammetry (CV). This nanostructured film modified electrode effectively exhibited enhanced properties for detection of ceftazidime (CFZ). The effects of various experimental variables such as, the amount of casted MWCNT,... 

A glassy carbon electrode (GCE) is modified with platinum nanoparticle (PtNPs) decorated multiwalled carbon nanotube (MWCNT). The modified electrode is applied for the determination of ceftriaxone (CFX) in the presence of lidocaine. Different methods were used to characterize the surface morphology of the modified electrode. The electrochemical behavior of CFX was investigated at GCE, MWCNT/GCE and PtNPs/MWCNT/GCE. A factorial-based response-surface methodology was used to find out the optimum conditions with minimum number of experiments. Under the optimized conditions, oxidation peak currents increased linearly with CFX concentration in the range of 0.01-10.00 μM with a detection limit of... 

In the present paper, the use of a carbon paste electrode modified by 2,2′-[1,2 buthanediylbis (nitriloethylidyne)]-bis-hydroquinone (BH) and TiO2 nanoparticles prepared by a simple and rapid method was described. The modified electrode showed an excellent character for electrocatalytic oxidization of norepinephrine (NE), acetaminophene (AC) and folic acid (FA). Using differential pulse voltammetry (DPV), a highly selective and simultaneous determination of NE, AC and FA has been explored at the modified electrode. Differential pulse voltammetry (DPV) peak currents of NE, AC and FA increased linearly with their concentration at the ranges of 4.0-1100.0 μM, 12.5-500.0 μM and 200.0-3200.0 μM,... 

Ag@Pt nanoparticles synthesized with different Ag/Pt mass ratios utilizing ultrasonic treatment method. These materials were supported on Vulcan XC-72 and utilized as cathode in a proton exchange membrane fuel cell (PEMFC). The morphology of this material characterized through the x-ray diffraction (XRD), induced coupled plasma atomic emission spectroscopy (ICP-OES) as well as; high resolution transmission electron microscopy (HRTEM) techniques. To begin with, it was proven that, the prepared Ag@Pt/C catalyst possessed a core–shell nanostructure. The electrochemical properties of this material investigated through the Cyclic Voltammetry (CV), linear sweep voltammetry (LSV) and... 

By using graphene nanosheets decorated with Ag nanoparticles (AgNPs-G) as an effective approach for the surface modification of pyrolytic graphite electrode (PGE), a sensing platform was fabricated for the sensitive voltammetric determination of Azathioprine (Aza). The prepared AgNPs-G nanosheets were characterized using transmission electron microscopy (TEM), X-ray diffraction (XRD), UV-vis and Raman spectroscopy techniques. The electrochemical behavior of Aza was investigated by means of cyclic voltammetry. Comparing to the bare PGE, a remarkable enhancement was observed in the response characteristics of Aza on the surface of the modified electrode (AgNPs-G/PGE) as well as a noticeable... 

The electrochemical behavior of Furazolidone (Fu) was investigated on the surface of the glassy carbon electrode modified with different carbon nanomaterials, including carbon nanotubes (CNTs), carbon nanoparticles (CNPs), nanodiamond-graphite (NDG), graphene oxide (GO), reduced graphene oxide (RGO) and RGO-CNT hybrids (various ratios) using linear sweep voltammetry (LSV). The results of voltammetric studies exhibited a considerable increase in the cathodic peak current of Fu at the RGO modified GCE, compared to other modified electrodes and also bare GCE. The surface morphology and nature of the RGO film was thoroughly characterized by scanning electron microscopy (SEM), atomic force... 

A carbon paste electrode, modified with 2, 2″-[1,7- hepthandiylbis(nitriloethylidyne)]-bis-hydroquinone and TiO 2 nanoparticles, was used for the simultaneous determination of dopamine (DA), uric acid (UA), and l-cysteine. The study was carried out by using cyclic voltammetry, chronoamperometry, and square wave voltammetry (SWV) techniques. Some kinetic parameters such as the electron transfer coefficient (α) and heterogeneous rate constant (k s) were also determined for the DA oxidation. A dynamic range of 8.0-1400 μM, with the detection limit of 8.4∈×∈10 -7 M for DA, was obtained using SWV (pH∈=∈7.0). The prepared electrode was successfully applied for the determination of DA, UA, and... 

Thin carbon nanoparticle/Nafion film (CNP/N), as a novel electrode material, is formed on the surface of the glassy carbon electrode in a simple solvent evaporation process. The electrochemical behavior of Azathioprine (Aza) at the CNP/N-modified electrode is investigated in detail by the means of cyclic voltammetry. During the electrochemical reduction of Aza, an irreversible cathodic peak is appeared. Cyclic voltammetric studies indicated that the reduction process has an irreversible and adsorption-like behavior. The observed reduction peak is attributed to a four-electron process referring to the reduction of nitro group to the corresponding hydroxylamine. The prepared electrode showed... 

Recently, graphitic carbon nitride (g-C3N4) has attracted great interest for photo(electro)chemical applications such as sensing, solar energy exploitation, photocatalysis, and hydrogen generation. This paper presents the potential application and benefits of g-C3N4 nanolayers as a green and highly efficient electrode modifier for the detection of trace lead ions in drinking water and urban dust samples. Carbon nitride nanosheets with a thickness of ∼6 A° and lateral of 100–150 nm were prepared through high-temperature polymerization of melamine followed by sonication-assisted liquid exfoliation. A glassy carbon electrode (GCE) was modified by a thin layer of g-C3N4 through drop casting and...