Sharif Digital Repository

In this study, polyaniline nanoparticles (PANI NPs) in emeraldine base (EB) form were prepared by a modified method and characterized by FTIR and UV–vis spectroscopies. The average size of the nanoparticles was 140 nm measured by DLS method. The nanoparticles were embedded into polylactic acid (PLA) nanofibers prepared by electrospinning method. It was found that inclusion of PANI NPs in PLA resulted in reduced diameter of the fibers during the electrospinning process. Also, the surface of nanofibers appeared smooth in FE-SEM images without formation of beads. Improvement in mechanical and electrical properties of PLA/PANI nanofibers over the neat PLA nanofibers implied a good dispersion of... 

Long-time interaction of dewetting nanodroplets is investigated using a long-wave approximation method. Although three-dimensional (3D) droplets evolution dynamics exhibits qualitative behavior analogous to two-dimensional (2D) dynamics, there is an extensive quantitative difference between them. 3D dynamics is substantially faster than 2D dynamics. This can be related to the larger curvature and, as a consequence, the larger Laplace pressure difference between the droplets in 3D systems. The influence of various chemical heterogeneities on the behavior of droplets has also been studied. In the case of gradient surfaces, it is shown how the gradient direction could change the dynamics. For a... 

Employing a biharmonic boundary integral method with linear elements, coarsening dynamics of nanodroplets on topographical step heterogeneity is investigated. It is shown that the step height and droplet configuration have an influential effect on the dynamics. Increasing the step height slows down the process while locating the droplets close to the step boosts the coarsening rate. Considering a slip boundary condition enhances the dynamics and reveals a transition in the droplet migration direction. Our results reveal that increasing the surface wettability weakens the dynamics. Various types of the disjoining pressure over the step are also considered and their effects on the coarsening... 

This paper concerns with the interfacial tension (IFT), wettability modification and adsorption behavior of a new plant-based surface active agent, Zizyphus Spina Christi, onto sandstone minerals which has been rarely attended in the available literature. Both kinetics and equilibrium adsorption data were obtained from batch mode tests. It was revealed that Freundlich isotherms matched better fit to the equilibrium data which implied that multilayer coverage of Zizyphus Spina Christi onto the sandstone particle surfaces was more likely to occur. Analysis of experimental kinetic data based on intraparticle diffusion model disclosed that the intraparticle diffusion mechanism is not the only... 

The dynamics of droplet detachment from a surface is a fundamental topic studied in coating engineering, fluid mechanics, and subsurface engineering applications. This topic has direct relevance to wettability alteration using the modified ionic composition of water in contact with oil droplet, low salinity waterflooding (LSWF). Previous experimental studies of LSWF have shown a very long timescale in wettability alteration which cannot be explained using bulk diffusion coefficient. In the present study, we address both the time scale of detachment, as well as the impact of buoyancy and interfacial forces (referred to as Bond number) on droplet detachment by proposing an advanced... 

Low salinity waterflooding (LSWF) is a process in which by lowering the ionic strength and/or manipulation of the composition of the injection water, the long term equilibrium in oil/brine/rock system is disturbed to reach a new state of equilibrium through which the oil production will be enhanced due to fluid/fluid and/or rock/fluid interactions. In spite of recent advances in the simulation of the LSWF at core scale and beyond, there are very few works that have modelled and simulated this process at the pore scale specially using direct numerical simulation (DNS). As a result the effects of wettability alteration and/or Interfacial Tension (IFT) change on the distribution of the phases... 

Using our recently developed model, for the first time in the literature, the effect of fluid/fluid and rock/fluid interactions on the performance of Low Salinity Waterflooding (LSWF, as an Enhanced Oil Recovery process) at pore-doublet scale is investigated. The model is incorporated into OpenFOAM and both the Navier-Stokes equation for oil/water two-phase flow and the advection-diffusion equation for ion transport (at both fluid/fluid and rock/fluid interface) are solved via direct numerical simulation (DNS). The model is validated against imbibition and drainage pore-doublet experiments reported in the literature, and then applied to investigate the sole effect of wettability alteration... 

Low salinity waterflooding (LSWF) is a process in which by lowering the ionic strength and/or manipulation of the composition of the injection water, the long term equilibrium in oil/brine/rock system is disturbed to reach a new state of equilibrium through which the oil production will be enhanced due to fluid/fluid and/or rock/fluid interactions. In spite of recent advances in the simulation of the LSWF at core scale and beyond, there are very few works that have modelled and simulated this process at the pore scale specially using direct numerical simulation (DNS). As a result the effects of wettability alteration and/or Interfacial Tension (IFT) change on the distribution of the phases... 

Laboratory experiments have shown that performance of waterflooding in oil reservoirs could be significantly increased by lowering the ionic strength and/or manipulation of its composition, which is generally known as low salinity waterflooding (LSWF). The involved mechanisms in additional oil production can be generally categorized in two categories, fluid/fluid and fluid/rock interactions. The distribution of the phases and the involved displacement mechanisms would be strongly affected by the inter-relations between capillary and viscous forces. Although there have been recent advances in the simulation of the LSWF at core scale and beyond and some models are included in commercial... 

Using our recently developed model, for the first time in the literature, the effect of fluid/fluid and rock/fluid interactions on the performance of Low Salinity Waterflooding (LSWF, as an Enhanced Oil Recovery process) at pore-doublet scale is investigated. The model is incorporated into OpenFOAM and both the Navier-Stokes equation for oil/water two-phase flow and the advection-diffusion equation for ion transport (at both fluid/fluid and rock/fluid interface) are solved via direct numerical simulation (DNS). The model is validated against imbibition and drainage pore-doublet experiments reported in the literature, and then applied to investigate the sole effect of wettability alteration... 

Low salinity waterflooding (LSWF) is a process in which by lowering the ionic strength and/or manipulation of the composition of the injection water, the long term equilibrium in oil/brine/rock system is disturbed to reach a new state of equilibrium through which the oil production will be enhanced due to fluid/fluid and/or rock/fluid interactions. In spite of recent advances in the simulation of the LSWF at core scale and beyond, there are very few works that have modelled and simulated this process at the pore scale specially using direct numerical simulation (DNS). As a result the effects of wettability alteration and/or Interfacial Tension (IFT) change on the distribution of the phases... 

Laboratory experiments have shown that performance of waterflooding in oil reservoirs could be significantly increased by lowering the ionic strength and/or manipulation of its composition, which is generally known as low salinity waterflooding (LSWF). The involved mechanisms in additional oil production can be generally categorized in two categories, fluid/fluid and fluid/rock interactions. The distribution of the phases and the involved displacement mechanisms would be strongly affected by the inter-relations between capillary and viscous forces. Although there have been recent advances in the simulation of the LSWF at core scale and beyond and some models are included in commercial... 

Characterizing the electrical resistance of the formation rock is of great importance in, for example, interpreting the well log data, calculating the porosity, and water saturation for the formation rocks. The relation between the resistivity factor and porosity and also between the resistivity index and water saturation (Archie equation) in the formation rock uses the parameters, such as the cementation factor and saturation exponent. However, the direct application of Archie equation to carbonate rocks that are very heterogeneous and mostly oil-wet needs further investigation. In this experimental work, the effects of overburden pressure, temperature, and interfacial tension on the...