Sharif Digital Repository

The most common reasons for hard-tissue implant failure are structural loosening and prosthetic infections. Hence, in this study, to overcome the first problem, different bioinspired coatings, including dual acid-etched, anodic TiO2 nanotubes array, anodic hierarchical titanium oxide (HO), micro- and nanostructured hydroxyapatite (HA) layers, and HA/chitosan (HA/CS) nanocomposite, were applied to the titanium alloy surfaces. X-ray diffraction and FTIR analysis demonstrated that the in situ HA/CS nanocomposite formed successfully. The MTT assay showed that all samples had excellent cell viability, with cell proliferation rates ranging from 120% to 150% after 10 days. The HO coating... 

A novel nebulizing spray hydrolysis approach was used for preparation of semi-transparent superhydrophobic coatings. Methyltrimethoxysilane was dissolved in water:ethanol mixture and ultrasonically sprayed on different substrates. Superhydrophobic coatings with a contact angle (CA) as high as 164° and a sliding angle below 5° were obtained. FESEM and AFM revealed a hierarchical micro-nano binary structure with nanometric roughness of the coatings. The coated glass substrate exhibited transmittance close to 80%. The prepared coating showed great self-cleaning and water jet repellency behaviors. The superhydrophobicity of the samples was remained after subjecting to ambient conditions for 50... 

The wetting condition of the reservoir rock is the key to the success of any EOR technique and the ultimate oil recovery. Wettability is dictated by the surface chemistry related to the interactions between the fluids and the rock surface which determines the stability of the water film between the rock and the oil phase. Streaming potential measurement is one of the electrokinetic techniques used to determine the average zeta potential of porous rock which can provide reliable information on fluid-rock interaction and wettability state of the rock surface. Streaming potential measurement has recently been introduced in the oil reservoirs applications and there are still significant... 

The high reactivity of the carbonate rocks at various pH makes it difficult to evaluate the wettability, hence to find the recovery mechanisms behind modified waterflood in carbonate reservoirs. More recently, the streaming potential measurement is introduced as a method of electrokinetic phenomena more relevant to the subsurface systems. Regarding few experimental studies and in order to improve our understanding on streaming potential measurement, the electrokinetic studies on quartz and calcite surface were conducted as a function of pH in the range of 1.5–11.5 using an in-house novel setup of streaming potential measurement. High sensitivity of streaming potential coupling coefficient to... 

Microbial enhanced oil recovery (MEOR) refers to the process of using bacterial activities for more oil recovery from oil reservoirs mainly by interfacial tension reduction and wettability alteration mechanisms. Investigating the impact of these two mechanisms on enhanced oil recovery during MEOR process is the main objective of this work. Different analytical methods such as oil spreading and surface activity measurements were utilized to screen the biosurfactant-producing bacteria isolated from the brine of a specific oil reservoir located in the southwest of Iran. The isolates identified by 16S rDNA and biochemical analysis as Enterobacter cloacae (Persian Type Culture Collection (PTCC)... 

Wettability alteration is the principal low-salinity-effect (LSE) in many oil-brine-rock (OBR) systems. Our recent experimental results have demonstrated that wettability alteration by low salinity is slow. It is expected that the electrical behavior of oil/brine and rock/brine interfaces and the water film geometry control both the transient hydrodynamic pressure, and the time-scale of ionic transport in the film, thus the kinetics and degree of wettability alteration. In this paper, the electro-diffusion process induced by the imposed ionic strength gradient is simulated by solving Poisson-Nernst-Planck equations in a water film bound between two charged surfaces, using a finite... 

Recently, Colloidal Gas Aphron (CGA) based fluids have been introduced to further develop depleted hydrocarbon reservoirs. This fluid system has been employed in an attempt to control drilling fluid invasion and, thus, reducing formation damage occurred during drilling operations. Understanding the mechanisms of fluid invasion control is of great importance for successful design and application of CGA-based fluids in drilling operations. Although fluid flow of conventional foams has been studied extensively in the available literature, little attention has been paid to CGA fluids flow, especially in heterogeneous fractured porous media. Here, an experimental study was conducted to achieve... 

In recent years, polysilicon nanoparticles are used to enhance the oil recovery through the water injection process in oilfields. The contributing mechanisms are the reduction of interfacial tension and wettability alteration which lead to improving or decreasing the oil phase relative permeability and can be traced by change of relative permeability curves. However, profound understanding of the effect of dispersed nano-silica particles on the hysteretic behavior of relative permeability curves remains a controversy topic in the literature.The current study illustrates the influence of dispersed silica particles on hysteretic trend of two-phase curves of oil-water relative permeability.... 

Devising effective methods to reduce drag forces is of great interest as these methods could prevent the wastage of fuel and decrease carbon emission and the global warming rate. Since the invention of Liquid-Infused Surfaces (LISs) in 2011, numerous investigations have been conducted to study their capability in various applications. Due to recirculation or drawing of the penetrated liquid within the surface structure, these surfaces acquire a slippiness property. The conducted investigations showed that these slippery surfaces have great potential for reducing drag forces, whether in a laminar or turbulent flow. In the present work, we first briefly elucidate common drag reduction methods,... 

In this study, a new facile and cost effective method is used to modify polysulfone membrane surface in order to improve the hydrophilicity, antifouling, and blood compatibility. This modification was performed by adding two functional monomers on the dialysis membrane. Polysulfone (PSF) membranes containing polyvinylpyrrolidone were prepared via phase inversion technique. In the next step, free radical polymerization combined with surface polymerization was used to introduce acrylic acid (AA) and 2-hydroxyethyl methacrylate (HEMA) onto the polysulfone membrane surface via circulation of initiator and monomer solutions across the membrane surface, respectively. Various monomer concentrations... 

Wire-shaped micro-supercapacitors attracted extensive attentions in next-generation portable and wearable electronics, due to advantages of miniature size, lightweight and flexibility. Herein, NiMoO 4 nanorods supported on Ni film coated Cu wire are successfully fabricated thorough direct deposition of Ni film onto Cu wire as the conductive substrate, followed by growth of the NiMoO 4 nanorods on Ni film coated Cu wire substrate by means a hydrothermal annealing process. The prepared 3D, porous electrode demonstrates extremely high areal specific capacitance of 12.03F cm −2 at the current density of 4 mA cm −2 and retained capacitance of 8.23 F cm −2 at a much higher current density of 80... 

In this study, zirconia antistatic coatings were synthesized by a simple dip coating sol-gel route on glass substrates, then applied to polymer-based composites to potentially improve their dust or water repellent capabilities. The coating solution contained a precursor (ZrCl4), solvent (isopropanol) and coupling agent. FTIR spectra confirmed ZrO2 and ZrO compounds in both solution and antistatic coating. FE-SEM images indicated ZrO2 fibers’ thickness was controlled by changing ZrCl4 concentration (150 g–15 g ZrCl4/l) or relative humidity (20%–60%) during coating drying. Fibers grew thicker when decreasing the former or increasing the latter. The surface electrical resistivity for all... 

This investigation is conducted on one of the southern Iranian oil fields, which experiences a fault on its gas cap. Therefore, no traditional gas injection and normal water injection for pressure maintenance is suggested. The target is set to inject special compatible and proper type of chemicals in each single well to avoid the pressure increase for the risk of oil and gas spill. Two different sources of aqueous phases, namely formation brine and sea water were used to find the effects of different brine composition on the main mechanisms of releasing the trapped oil, interfacial tension (IFT) and wettability alteration. The obtained results reveal that both the ionic liquid (IL) based... 

One of the methods that is used nowadays in enhanced oil recovery is surfactant flooding. The main mechanisms of surfactant flooding in reservoir consist of reduction of interfacial tension between water and oil and modification of rock wettability. In this study, the authors simulate the surfactant injection process in Darcy scale and in one-dimensional, multicomponent, multiphase state, and effects of physical phenomena such as adsorption, dispersion, convection, and exchange between fluids and solids are considered. Wettability alteration of reservoir rock due to presence of surfactant in injected fluid is detected in relative permeability and capillary pressure curves. First, the authors... 

A lubrication model is used to study the dynamics of nanoscale droplets on wettability gradient surfaces. The effects of the gradient size, size of the nanodroplets and the slip on the dynamics have been studied. Our results indicate that the position of the center of mass of the droplets can be well described in terms of a third-order polynomial function of the time of the motion for all the cases considered. By increasing the size of the droplets the dynamics increases. It is also shown that the slip can considerably enhance the dynamics. The results have been compared with the results obtained using theoretical models and molecular dynamics simulations  

This study aims to investigate the role of fluid-fluid interactions during low salinity water flooding, using crude oil from an Iranian oil reservoir. To minimize the effects of mineral heterogeneity and wettability alteration, a synthetic sintered glass core was utilized and all coreflooding experiments were performed at low temperatures without any aging process. The effect of fluid-fluid interactions were investigated in both secondary and tertiary injection modes. pH measurements as well as UV-Vis spectroscopy and interfacial tension (IFT) analysis were performed on the effluent brine samples. Results: show that fluid-fluid interactions, mainly the dissolution of crude oil polar... 

Conductive self -electrical stimuli bioactive scaffolds could be used the potential for peripheral nerve regeneration with the maximum efficiency. To produce such conductive self-electrical stimuli bioactive scaffolds, chopped spun piezoelectric nanofibers of polyvinylidene fluoride/mesoporous silica nanoparticle (PVDF/MCM41) are prepared and incorporated in gellan/polyaniline/graphene (gellan/PAG) nanocomposites which have been previously prepared by incorporation of polyaniline/graphene (PAG) nanoparticles in gellan gel at 80 °C. Highly conductive binary doped polyaniline/graphene nanoparticles are prepared by chemical oxidative polymerization of aniline monomer using in-suite... 

Application of nano or biomaterials for enhanced oil recovery (EOR) has been recently much attended by petroleum engineering researchers. However, how would be the displacement mechanisms and how would change the recovery efficiency while nano and biomaterials are used simultaneously is still an open question. To this end, a series of injection tests performed on micromodel containing shale strikes. Three types of biomaterials including biosurfactant, bioemulsifier, and biopolymer beside two types of nanoparticles including SiO2 and TiO2 at different concentrations were used as injection fluids. The microscopic as well as macroscopic efficiency of displacements were observed from analysis of... 

The efficiency of low salinity waterflooding, particularly during tertiary mode injection, is highly controlled by in situ mixing between the stagnant regions holding high salinity water (HSW) and the flowing regions containing low salinity water (LSW) because it impacts directly the electrokinetics of wettability alteration and the time scale of the low salinity effect. This study aims to address the effects of oil polarity and charged rock surfaces on the time scale of mixing and transport under two-phase flow conditions. A systematic series of micromodel experiments were performed. The micromodels were first saturated with high salinity formation brine and oil (both model and crude oil);... 

One of the key open questions in the area of low or controlled salinity water flooding (LSWF or CSWF) is how the observed oil recovery at macro-scale (e.g. Darcy or core-scale) can the explained and what underlying microscopic mechanisms drive it. Thus far, the micromodel investigation of LSWF has been limited to sandstones, remaining challenging to apply to carbonates. In this paper we aim to i) extend the capability to fabricate a novel calcite micromodel using Iceland spar calcite crystal, ii) investigate the pore-scale mechanisms leading to oil recovery from carbonates. A target crude oil-brine-rock (COBR) system was first selected. To screen potential brines which can produce...