Sharif Digital Repository

Objective: The dimensional properties of iron ore pellet feed including specific surface area and particle size distribution in the ball mill was studied using response surface area method. Methods/Statistical analysis: The effect of the operational parameters of dry ball mill including ball charge (20-40%), grinding time (30-50 min) and balling distribution (Small, Mixed and Large) on dimensional properties of pellet feed was meticulously examined and optimized using response surface methodology based on Central Composite Design (CCD). Responses were 80% passing size (D80) and Blaine (BL). A total of 30 grinding experiments were designed and carried out in the CCD method. Regression models... 

An effect of a grinding method, that is ball mill and high pressure grinding rolls (HPGR), on the particle size, specific surface area and particle shape of an iron ore concentrate was studied. The particle size distribution was meticulously examined by sieve, laser and image analyses. To measure the specific surface area of particles, Brunauer-Emmett-Teller (BET) and Blaine methods were used. It was found that for samples having equal Blaine specific surface areas numbers, the amount of fine particles produced in HPGR was higher than that produced in a ball mill. A higher surface area was observed from HPGR treatment in comparison to ball mill grinding, provided by a higher porosity,... 

In this study the leaching of a high rutile containing slag in sulphuric acid has been investigated to find optimum leaching conditions. Using "Fractional Factorial" technique it was deduced that leaching temperature and duration, acid concentration and particle size are the most prominent parameters in the leaching process. The optimization of the leaching process was investigated using the "Rotatable Central Composite Design" technique. The four prominent parameters were studied at 5 different test values each. 3D response surface was employed to illustrate interaction of the parameters. The optimum leaching conditions for the ilmenite concentrate are thus recognized as: T = 123.9°C, time... 

In this study, application of the Response Surface Methodology and the Central Composite Design (CCD) technique for modeling and optimization of the influence of several operating variables on titanium recovery in a leaching process were investigated. The four main leaching parameters, namely temperature, acid concentration, leaching time and solid to liquid ratio, were changed during-the leaching experiments based on the CCD. A total of 30 leaching experiments were designed and carried out in the CCD method according to software-based designed matrix. According to the results, i.e., titanium recoveries with these four parameters as well as empirical model equations were developed. The model... 

In this study the effect of HPGR operational parameters on the dimensional properties of pellet feed was examined and optimized using factorial methodology. The operational parameters considered include feed moisture, specific pressure and roll speed. For this study, size and shape of particles with Blaine number in the range 1800–2200 cm2 g−1 was thoroughly investigated. It was deduced that increasing the specific pressure and decreasing the roll speed would result in reduction of D80 but would increase the Blaine number. The circularity, aspect ratio and roughness descriptors of the particles were measured by SEM micrographs and image analysis software. It was observed that particles... 

In this study the effect of HPGR operational parameters on the dimensional properties of pellet feed was examined and optimized using factorial methodology. The operational parameters considered include feed moisture, specific pressure and roll speed. For this study, size and shape of particles with Blaine number in the range 1800–2200 cm2g−1 was thoroughly investigated. It was deduced that increasing the specific pressure and decreasing the roll speed would result in reduction of D80 but would increase the Blaine number. The circularity, aspect ratio and roughness descriptors of the particles were measured by SEM micrographs and image analysis software. It was observed that particles tended... 

This study aims to assess the impact of the spacing between cylinders on their dynamic behaviour. Observations during this experiment have helped to identify the effect of spacing on excitation mechanism of each cylinder as well as establishing the relationship between cylinders response and the spacing between them. Arrays of cylindrical Structures in close proximity are common in variety of engineering structures, particularly in the offshore industry. If the cylinders are flexible, and are subject to excitation from fluid flow, then the dynamics is influenced by complex interactions between the cylinders, dependent on a variety of parameters. Two cylinders were flexibly mounted in tandem... 

Molybdenum resources around the world are mainly associated with porphyry copper ores. Molybdenite (MoS2) is the main Mo mineral that has rhenium in its crystal lattice. This paper investigates the recovery of rhenium and molybdenum from a molybdenite concentrate using a hydrometallurgical treatment method. The molybdenite concentrate is leached with nitric acid and subjected to solvent extraction to recover and separate rhenium and molybdenum from the leached liquor. The effects of pH and the chemicals' concentration on extraction characteristics of Mo and Re are investigated to define the best condition for selective extraction of these metals. The tested leached liquor contained of 8.2... 

A nonlinear mathematical model is developed in the time domain to simulate the behaviour of two identical flexibly mounted cylinders in tandem while undergoing vortex-induced vibration (VIV). Subsequently, the model is validated and modified against experimental results. Placing an array of bluff bodies in proximity frequently happens in different engineering fields. Chimney stacks, power transmission lines and oil production risers are few engineering structures that may be impacted by VIV. The coinciding of the vibration frequency with the structure natural frequency could have destructive consequences. The main objective of this study is to provide a symplectic and reliable model capable... 

Particle size and shape of iron ore concentrate are effective parameters in the production of quality green pellets. In this research, the effect of particle morphology on green pellet quality was studied. It was concluded that pellet quality improved with increasing specific surface area. Drop number and green compression strength of pellets ground by HPGR were found to be superior over those ground in the ball mill. The chief reasons were related to particle shape and the fraction of fine particles. Smaller particle size results in a higher order of bonding between particles and therefore the formation of a stronger system. Also, the rougher and less circular shape of particles resulted in...