Sharif Digital Repository

This paper proposes a novel decentralized control approach for islanded direct-current (DC) microgrids (MGs) based on model predictive control (MPC) to regulate the distributed generation unit (DGU) output voltages, i.e. the voltages of the point of common coupling (PCC). A local controller is designed for each DGU, in the presence of uncertainties, disturbances, and unmodeled dynamics. First, a discrete-time state-space model of an MG is derived. Afterward, an MPC algorithm is designed to perform the PCC voltage control. The proposed MPC scheme ensures that the PCC voltages remain within an acceptable range. Several simulation studies have been conducted to illustrate the effectiveness of... 

Passive finite element (FE) models of the spine are commonly used to simulate intact and various pre- and postoperative pathological conditions. Being devoid of muscles, these traditional models are driven by simplistic loading scenarios, e.g., a constant moment and compressive follower load (FL) that do not properly mimic the complex in vivo loading condition under muscle exertions. We aim to develop novel passive FE models that are driven by more realistic yet simple loading scenarios, i.e., in vivo vertebral rotations and pathological-condition dependent FLs (estimated based on detailed musculoskeletal finite element (MS-FE) models). In these novel force–displacement control FE models,... 

In this paper, the flexible flow shop sequence-dependent group scheduling problem (FFSDGS) with minimisation of makespan as the criterion (FF m|fmls, S plk|C max) is investigated. For the first time a mathematical model for the proposed research problem is developed. Since the problem is shown to be NP-hard, six metaheuristic algorithms based on tabu search (TS) are developed to efficiently solve the problem. The proposed metaheuristics are different to the only available metaheuristic algorithm in the literature based on TS. By applying randomised complete block design and using available test problems in the literature, the best of the proposed TS algorithms in this research is identified.... 

Humans have a unique ability to use language for social communication. The neural architecture for language comprehension and production may have prominently emerged in the brain areas that were originally involved in social cognition. Here, we directly tested the fundamental link between language and social processing using functional magnetic resonance data (MRI) data from over 1,000 human subjects. Cortical activations in language and social tasks showed a striking similarity with a complementary hemispheric lateralization. Within core language areas, left-lateralized activations in the language task were mirrored by right-lateralized activations in the social task. Outside these areas,... 

In this article, ferrohydrodynamic forced-convection heat transfer from a heated sphere embedded in a ferrofluid in the presence of the uniform external magnetic field has been studied numerically for the first time over a wide range of Reynolds number value, nanoparticle diameter, particle volume fraction, and magnetic field intensity. Despite the uniform external magnetic field applied, the internal magnetic field near the sphere could be nonuniform due to the considerable difference between the relative magnetic permeability of the sphere and the surrounding medium. Kelvin body force arises from this nonuniformity and induces vortexes near the sphere. These vortexes disturb the boundary... 

The effectiveness of the application of CFD to vapour cloud explosion (VCE) modelling depends on the accuracy with which geometrical details of the obstacles likely to be encountered by the vapour cloud are represented and the correctness with which turbulence is predicted. This is because the severity of a VCE strongly depends on the types of obstacles encountered by the cloud undergoing combustion; the turbulence generated by the obstacles influences flame speed and feeds the process of explosion through enhanced mixing of fuel and oxidant. In this paper a CFD-based method is proposed on the basis of the author's finding that among the various models available for assessing turbulence, the... 

Graphene oxide membranes were prepared by vacuum and pressurized ultrafiltration methods on the 12% modified Polyacrylonitrile (12mPAN) substrate to specify challenges, salient features, future directions, and potential of GO membrane for separation fields using characterization techniques and gas separation test (studied gases are CO2, He and N2), which is an efficient tool for better understanding of GO membrane behavior. GO membrane structure was examined over a wide range of parameters, such as pore size range of substrate and its surface properties, pH of GO dispersion, GO content, synthesis pressure, operating pressure and temperature. The results show that the GO content does not hold... 

The solubility of Pd(NO3)2 in water is moderate whereas it is completely soluble in diluted HNO3 solution. Pd/MIL-101(Cr) and Pd/MIL-101-NH2(Cr) were synthesized by aqueous solution of Pd(NO3)2 and Pd(NO3)2 solution in dilute HNO3 and used for CO oxidation reaction. The catalysts synthesized with Pd(NO3)2 solution in dilute HNO3 showed lower activity. The aqueous solution of Pd(NO3)2 was used for synthesis of mono-metal Ni, Pd and bimetallic PdNi nanoparticles with various molar ratios supported on MOF. Pd70Ni30/MIL-101(Cr) catalyst showed higher activity than monometallic counterparts and Pd + Ni physical mixture due to the strong synergistic effect of PdNi nanoparticles, high distribution... 

The solubility of Pd(NO3)2 in water is moderate whereas it is completely soluble in diluted HNO3 solution. Pd/MIL-101(Cr) and Pd/MIL-101-NH2(Cr) were synthesized by aqueous solution of Pd(NO3)2 and Pd(NO3)2 solution in dilute HNO3 and used for CO oxidation reaction. The catalysts synthesized with Pd(NO3)2 solution in dilute HNO3 showed lower activity. The aqueous solution of Pd(NO3)2 was used for synthesis of mono-metal Ni, Pd and bimetallic PdNi nanoparticles with various molar ratios supported on MOF. Pd70Ni30/MIL-101(Cr) catalyst showed higher activity than monometallic counterparts and Pd + Ni physical mixture due to the strong synergistic effect of PdNi nanoparticles, high distribution... 

The solubility of Pd(NO3)2 in water is moderate whereas it is completely soluble in diluted HNO3 solution. Pd/MIL-101(Cr) and Pd/MIL-101-NH2(Cr) were synthesized by aqueous solution of Pd(NO3)2 and Pd(NO3)2 solution in dilute HNO3 and used for CO oxidation reaction. The catalysts synthesized with Pd(NO3)2 solution in dilute HNO3 showed lower activity. The aqueous solution of Pd(NO3)2 was used for synthesis of mono-metal Ni, Pd and bimetallic PdNi nanoparticles with various molar ratios supported on MOF. Pd70Ni30/MIL-101(Cr) catalyst showed higher activity than monometallic counterparts and Pd + Ni physical mixture due to the strong synergistic effect of PdNi nanoparticles, high distribution... 

This study forwards a novel and simple approach for encapsulation of Phosphotungstic acid (PTA) into MIL-101(Cr) cavities to develop PTA-MIL-101(Cr) with a high surface area. In this method, the resulting surface area of PTA-MIL-101(Cr) (3563 m2/g) is 1.72 times that of MIL-101(Cr) due to the existence of more accessible pores which are formed by leaching of PTAs incorporated inside MIL-101(Cr) pores during the intense washing. Catalysts are investigated in CO oxidation under atmospheric pressure and feed composition of 1%CO, 20%O2, and 79%He. 3%Pd/PTA-MIL-101(Cr) shows 100%CO conversion at T = 145 °C and outperforms PTA, PTA-MIL-101(Cr), Pd/PTA, 1–3%Pd/MIL-101(Cr), Pd-PTA/MIL-101(Cr), and... 

Numerous advantages of application of tailor welded blanks (TWBs) in automobile industry, namely reduction of weight, fuel consumption and air pollution, have made the manufacturers eager to investigate in this field. On the other hand, while experiments generally provide valuable information in regard with mechanical behaviors, but utilization of simulation methods has extended vastly due to time and cost saving issues. One challenging issue in numerically analyzing the forming behavior of transversely welded TWBs, welded by laser welding methods, has been the presence of weld zone. While some researchers believe that during simulation, the weld zone can be neglected due to its minority and... 

Organ-on-chip devices have provided the pharmaceutical and tissue engineering worlds much hope since they arrived and began to grow in sophistication. However, limitations for their applicability were soon realized as they lacked real-time monitoring and sensing capabilities. The users of these devices relied solely on endpoint analysis for the results of their tests, which created a chasm in the understanding of life between the lab the natural world. However, this gap is being bridged with sensors that are integrated into organ-on-chip devices. This review goes in-depth on different sensing methods, giving examples for various research on mechanical, electrical resistance, and bead-based... 

It is always crucial to estimate process capability index (PCI) when the quality characteristic does not follow normal distribution, however skewed distributions come about in many processes. The classical method to estimate process capability is not applicable for non-normal processes. In the existing methods for non-normal processes, probability density function (pdf) of the process or an estimate of it is required. Estimating pdf of the process is a hard work and resulted PCI by estimated pdf may be far from real value of it. In this paper an artificial neural network is proposed to estimate PCI for right skewed distributions without appeal to pdf of the process. The proposed neural... 

LDL concentration is believed to be responsible for plaque formation that leads to atherosclerotic cardiovascular disease. We conducted this study to investigate the effects of hematocrits and LDL diameters on LDL concentration on the wall of an abdominal aortic aneurysm (AAA). The blood flow was considered to be a pulsatile and non-Newtonian flow whose viscosity was a function of hematocrits and strain rate. Lumen, Brownian, and thermophoresis diffusions were analyzed in LDL concentration. The results demonstrated that adding thermophoresis diffusion increases LDL concentration. Moreover, among three types of LDLs, including small LDLs, intermediate LDLs, and large LDLs, small LDLs were the... 

LDL concentration is believed to be responsible for plaque formation that leads to atherosclerotic cardiovascular disease. We conducted this study to investigate the effects of hematocrits and LDL diameters on LDL concentration on the wall of an abdominal aortic aneurysm (AAA). The blood flow was considered to be a pulsatile and non-Newtonian flow whose viscosity was a function of hematocrits and strain rate. Lumen, Brownian, and thermophoresis diffusions were analyzed in LDL concentration. The results demonstrated that adding thermophoresis diffusion increases LDL concentration. Moreover, among three types of LDLs, including small LDLs, intermediate LDLs, and large LDLs, small LDLs were the... 

Forming limit diagrams (FLDs) are extensively used in industries, particularly the auto industry. The establishment of these diagrams using a predictive approach can lead to reduction in both cost and time. In the present work, Gurson-Tvergaard-Needleman (GTN), a porosity-based model, was used to predict the FLD of an interstitial-free steel via finite element simulation. Optimum values of the GTN model were obtained by applying a response surface methodology (RSM) based on central composite design. Results show that RSM is a good method for an appropriate determination of the GTN model parameters, such as initial void volume fraction, effective void volume fraction, critical void volume... 

Response surface methodology (RSM) explores the relationships between several explanatory variables and one or more response variables. The main idea of RSM is to use a set of designed experiments to obtain an optimal response. RSM tries to simplify the original problem through some polynomial estimation over small sections of the feasible area, elaborating on optimum provision through a well known optimization technique, say Gradient Method. As the real world problems are usually very complicated, polynomial estimation may not perform well in providing a good representation of the objective function. Also, the main problem of the Gradient Method, getting trapped in local minimum (maximum),... 

To study the rate of energy and momentum loss of a heavy quark in QGP, specifically in the hydrodynamic regime, we use fluid/gravity duality and construct a perturbative procedure to find the string solution in gravity side. We show that by this construction, the position of the world-sheet horizon and thereby the drag force exerted on the quark can be computed perturbatively, order by order in a boundary derivative expansion, for a wide range of quark velocities. At ideal order, our result is just the localized expression of the drag force exerted on a moving quark in thermal plasma, while for a quark whose velocity does not belong to the mentioned range, we predict a nonlocal drag force.... 

We determine the most general form of the covariant drag force exerted on a quark moving through a fluid dynamical flow. Up to first order in derivative expansion, our general formula requires the specification of seven coefficient functions. We use the perturbative method introduced in arXiv:1202.2737 and find all these coefficients in the hydrodynamic regime of a N = 4 SYM plasma. Having this general formula, we can obtain the rate of the energy and momentum loss of a quark, namely the drag force, in a general flow. This result makes it possible to perturbatively study the motion of heavy quarks moving through the Bjorken flow up to first order in derivative expansion