Sharif Digital Repository

In this study, a new isolated high-gain switched-boost DC/DC converter employing two symmetrical switched-boost networks along with a modified control algorithm based on the combination of the pulse-width modulation (PWM) and phase-shift modulation is proposed. Utilising symmetrical switched-boost networks increase the voltage gain of the proposed converter, significantly. Moreover, applying the proposed switching algorithm on the proposed isolated switched-boost DC/DC converter leads to the following advantages: (i) high-voltage gain, (ii) zero voltage switching (ZVS) turn-on of two switches, (iii) ZVS turnoff of two switches and (iv) appearing three controllable parameters (the... 

In this article, ferrohydrodynamic forced-convection heat transfer from a heated sphere embedded in a ferrofluid in the presence of the uniform external magnetic field has been studied numerically for the first time over a wide range of Reynolds number value, nanoparticle diameter, particle volume fraction, and magnetic field intensity. Despite the uniform external magnetic field applied, the internal magnetic field near the sphere could be nonuniform due to the considerable difference between the relative magnetic permeability of the sphere and the surrounding medium. Kelvin body force arises from this nonuniformity and induces vortexes near the sphere. These vortexes disturb the boundary... 

Here in this study, successful conversion of visible light into electricity has been achieved through utilizing microalgal pigments as a sensitizer of nanostructured photo-electrode of dye-sensitized solar cells (DSSCs). For the first time, photosynthetic pigments extracted from microalgae grown in wastewater is employed to imitate photosynthesis process in bio-molecule-sensitized solar cells. Two designs of photoanode were employed: 10μm nanoparticular TiO2 electrode and 20μm long self-ordered, vertically oriented nanotube arrays of titanium dioxide films. Microalgal photosynthetic pigments are loaded on nanostructured electrodes and their photovoltaic performances have been investigated.... 

Forming limit diagrams (FLDs) are extensively used in industries, particularly the auto industry. The establishment of these diagrams using a predictive approach can lead to reduction in both cost and time. In the present work, Gurson-Tvergaard-Needleman (GTN), a porosity-based model, was used to predict the FLD of an interstitial-free steel via finite element simulation. Optimum values of the GTN model were obtained by applying a response surface methodology (RSM) based on central composite design. Results show that RSM is a good method for an appropriate determination of the GTN model parameters, such as initial void volume fraction, effective void volume fraction, critical void volume... 

In the framework of chiral kinetic theory (CKT), we consider a system of right-and left-handed Weyl fermions out of thermal equilibrium in a homogeneous weak magnetic field. We show that the Lorentz invariance implies a modification in the definition of the momentum current in the phase space, compared to the case in which the system is in global equilibrium. Using this modified momentum current, we derive the linearized conservation equations from the kinetic equation up to second order in the derivative expansion. It turns out that the eigenmodes of these equations, namely the hydrodynamic modes, differ from those obtained from the hydrodynamic in the Landau-Lifshitz (LL) frame at the same... 

We argue that in order to study the magneto-transport in a relativistic Weyl fluid, it is needed to take into account the associated quantum corrections, namely the side-jump effect, at least to second order. To this end, we impose Lorentz invariance to a system of free Weyl fermions in the presence of the magnetic field and find the second order correction to the energy dispersion. By developing a scheme to compute the integrals in the phase space, we show that the mentioned correction has non-trivial effects on the thermodynamics of the system. Specifically, we compute the expression of the negative magnetoresistivity in the system from the enthalpy density in equilibrium. Then in analogy... 

To attain superior energy density concurrently with high power density, high-performance supercapacitors have been developed. Herein an innovative strategy has been adopted to fabricate unique binder-free electrodes composed of a unique porous structure of binary metal carbonate hydroxide nanomace-decorated hydrothermal porous carbon spheres (PCSs). Hierarchical nickel-cobalt carbonate hydroxide (NiCOCH) nanomaces, directly grown on PCSs, are used as positive electrodes for supercapacitors fabrication. Furthermore, Fe2O3@PCS composites, having benefits of highly reversible redox reaction in the negative potential window and highly porous structure, are employed as the negative electrode in... 

To attain superior energy density concurrently with high power density, high-performance supercapacitors have been developed. Herein an innovative strategy has been adopted to fabricate unique binder-free electrodes composed of a unique porous structure of binary metal carbonate hydroxide nanomace-decorated hydrothermal porous carbon spheres (PCSs). Hierarchical nickel-cobalt carbonate hydroxide (NiCOCH) nanomaces, directly grown on PCSs, are used as positive electrodes for supercapacitors fabrication. Furthermore, Fe2O3@PCS composites, having benefits of highly reversible redox reaction in the negative potential window and highly porous structure, are employed as the negative electrode in... 

In the present study the behavior of Ti-Al-C ternary system is investigated during mechanical alloying. The mixture of Ti, Al and C powders was used with initial stoichiometric composition of Ti3AlC2. X-ray diffraction (XRD) was used to characterize the milled powders and a thermodynamic analysis of the process was then carried out using Miedema model. This thermodynamic analysis showed that for all binary Ti-C, Al-C, Ti-Al systems and ternary Ti-Al-C systems, among all compositions, the thermodynamic driving force for intermetallic phase formation is much greater when compared with the formation of solid solutions or amorphous phases. Finally the reactions that are feasible to occur during... 

The Block method approach to solve EIT problem leads to an exact solution if the measurements are done without error. Non-iterative method is a feasible approach on solving 3D EIT forward problem. However, the effect of the measurement error has not been considered in this method yet. In this article, the 3D model of EIT with block method has been considered. The required equations to solve the forward problem are then generated. To solve the forward problem, non-iterative method has been employed. Effect of the measurement error on forward problem for a 3D model of EIT are generated. It has been shown that for a sample 3D model, measurement error can propagate exponentially. ©2007 IEEE  

Monoframe droplet shadow velocimetry (mf-DSV) is a cost-effective method in the quality control process of the injectors. In this method, the planar (2D) velocity of the droplets is measured by tracking the droplets in a volumetric illumination, known as shadowgraphy technique. An image with two footprints of each droplet in time lapse of two light pulses is used to determine the displacement/velocity. The mf-DSV method could be established by a much less expensive setup than the traditional velocimetry method. A high-power LED-based light source and ordinary camera without capability of double shutter mode are the requirements of this method. In this paper, different stages of image... 

We consider a fluid with weakly broken time and translation symmetries. We assume the fluid also possesses a U(1) symmetry which is not only weakly broken, but is anomalous. We use the second order chiral quasi-hydrodynamics to compute the magneto conductivities of this fluid in the presence of a weak magnetic field. Analogous to the electrical and thermoelectric conductivities, it turns out that the thermal conductivity depends on the coefficient of mixed gauge-gravitational anomaly. Our results can be applied to the hydrodynamic regime of every arbitrary system, once the thermodynamics of that system is known. By applying them to a free system of Weyl fermions at low temperature limit T ≪... 

This paper presents a comparative performance analysis in more realistic scenario and more performance metrics of ADMR and ODMRP, two on-demand multicast routing protocols for Mobile Ad hoc Networks (MANETs) and Wireless Sensor Networks (WSNs). There are a few comparison works done between two multicast Ad hoc routing protocols, ADMR and ODMRP; these works are not complete in terms of both performance metrics and realistic scenarios. Simulation results show an unusual low number of control packets transmitted per data packet delivered in ADMR, this low number of control packet transmitted per data packet in ADMR has caused some comparison works to judge to better performance of ADMR than... 

Structures like beams, plates, shells, and sectors have a key role in different fields of science and engineering. Reliable design of structures requires detailed understanding of their behavior in different service conditions including statics, dynamics, and vibration. For instance, dynamics and vibration characteristics of structures such as natural frequencies, mode shapes, and damping ratios are among interesting properties. Furthermore, in most severe conditions, linear theories are not enough to accurately capture real structural behavior. Thus, investigation of nonlinear and/or large amplitude vibration of structures which is normally governed by system of nonlinear differential... 

Purpose: Many construction projects are implemented in open-environment job sites and can be significantly affected by various weather conditions. Evaluating the overall impacts of the weather conditions on a project can assist project managers to prepare effectively. Nevertheless, methods measuring the overall adverse impacts of the job sites’ weather condition on the project performance are still missing. This study aims to address this gap. Design/methodology/approach: In this investigation, a survey-based method was proposed to evaluate the overall impacts of the weather conditions on the construction project resources through a new indicator called job site weather index (JWI). The... 

A straightforward three-stage method was applied to fabricate a super-hydrophobic mixed-matrix nanofiber membrane using the electrospinning method for desalination purpose. First, a hydrothermal technique was applied to synthesize a super-hydrophobic nano-sheet, called octadecylamine-reduced graphene oxide (ODA-rGO) with a water contact angle of 162°, which was then added to PVDF-HFP dope solution. After, 0.005 wt% LiCl was added to the dope solution to decrease the mean pore size by increasing solution conductivity. Moreover, some membranes were hot-pressed to improve liquid entry pressure (LEP). Eventually, a top-quality nanofiber membrane was synthesized using 0.1 wt% ODA-rGO and 0.005... 

This article summarizes the first and second Iranian brain-computer interface competitions held in 2017 and 2018 by the National Brain Mapping Lab. Two 64-channel electroencephalography (EEG) datasets were contributed, including motor imagery as well as motor execution by three limbs. The competitors were asked to classify the type of motor imagination or execution based on EEG signals in the first competition and the type of executed motion as well as the movement onset in the second competition. Here, we provide an overview of the datasets, the tasks, the evaluation criteria, and the methods proposed by the top-ranked teams. We also report the results achieved with the submitted algorithms... 

This paper will first describe the Linear-Quadratic-Gaussian (LQG) and Lead-Compensator when the Proportional-Integral-Derivative (PID) controllers are inactive for procedures that have large delay time (LDT) in transfer stage. Therefore in those states, LQG and Lead Compensator perform better than the PID controllers. The constrained LQG is optimal and stabilizing. The solution algorithm is guaranteed to terminate in finite time with a computational cost that has a reasonable upper bound compared to the minimal cost for computing the optimal solution. In this work all actual working area condition for instance noises and disturbances are considered. Eventually, LQG and Lead Compensator have...