Loading...
Search for:
abbasi-chenari--fatemeh
0.133 seconds
Total 317 records
Numerical Study of Spray Impingement to Solid Wall
, M.Sc. Thesis Sharif University of Technology ; Morad, Mohammad Reza (Supervisor) ; Jahannama, Mohammad Reza (Co-Supervisor)
Abstract
Spray-wall impingement is one of the phenomenon that associated in different subject such as spray cooling, combustion chamber and gas turbine. With the impingement of spray to the wall, liquid film begins to form. Wall film characteristics is still an important subject to study. Due to the various stages of liquid film formation from injection of spray till spray-wall impingement, the investigation of this phenomenon is far more complicated. This paper is meant to provide detailed data on spray-wall impingement and wall film formation physics with the help of computational analysis of OpenFOAM . A Lagrangian-Eulerian method based on discrete phase model (DPM) was employed to model...
ChemInform abstract: microwave-assisted rapid ketalization/acetalization of aromatic aldehydes and ketones in aqueous media [electronic resource]
, Article Journal of Chemical Research ; September 1999, Volume -, Number 9; Page(s) 562 to 563 ; Mirjalili, Bibi Fatemeh ; Sharif University of Technology
Abstract
Aromatic aldehydes and ketones are readily acetalized or ketalized under microwave irradiation in the presence of water as a solvent
Synthesis and characterization of poly(methacrylates) containing spiroacetal and norbornene moieties in side chain [electronic resource]
, Article Journal of Applied Polymer Science ; Volume 77, Issue 1, pages 30–38, 5 July 2000 ; Mirjalili, Bibi Fatemeh ; Sharif University of Technology
Abstract
A four-step synthetic strategy was applied to achieve novel methacrylic monomers. 5-Norbornene-2,2-dimethanol was prepared from a Diels–Alder reaction of cyclopentadiene and acrolein, followed by the treatment of the adduct with an HCHO/KOH/MeOH solution. The resulting 1,3-diol (1) was then acetalized with different aromatic aldehydes having OH groups on the ring to produce four spiroacetal derivatives. The reaction of methacryloyl chloride with the phenolic derivatives led to four new methacrylic monomers that were identified spectrochemically (mass, FTIR, 1H-NMR, and 13C-NMR spectroscopy). Free radical solution polymerization was used to prepare novel spiroacetal–norbornene containing...
Minimizing the Level of Damage of Structures and Improving their Performance through Optimal Design of Semi-Active Tuned Mass Damper
, M.Sc. Thesis Sharif University of Technology ; Rahimzadeh Rofooei, Fayyaz (Supervisor)
Abstract
The aim of this study is to evaluate the seismic performance of structures using a semi-active tuned mass damper minimizing the amount of structural damage caused by earthquakes. One of semi-active control mechanisms, which has been studied in recent years, is the damper with fluid controlled by a magnetic field (Magnetorehological Damper, MR). These type of dampers react to the magnetic fields that cause significant changes in the behavior of fluid flow. These dampers are acknowledged because of their simplicity, broad operating range as well as not requiring high-power energy sources. In this thesis, a MR damper is used instead of the existing viscous element of tuned mass damper. To...
Non-Linear Vibration and Stability Analysis of a Rotor with Rubbing and NonLinear Support
, M.Sc. Thesis Sharif University of Technology ; Mohammad Navazi, Hossein (Supervisor)
Abstract
The present study aims to achieve two major objectives in the field of Rotordynamics. The first one is to investigate the frequency response function by considering rubbing between fixed and rotating components of the system and also the presence of nonlinear support such as tiling-pad bearings using analytical approach and the second one is to study the stability of the system using both analytical and numerical methods. In first step, by using assumptions and laws of physics, a model for dealing with the rubbing phenomenon and the friction force between fixed and rotating components of the system is presented. In the next step, the rubbing force is modeled. Then using the Jeffcott rotor...
Prediction of DNA/RNA Sequence Binding Site to Protein with the Ability to Implement on GPU
, M.Sc. Thesis Sharif University of Technology ; Koohi, Sommaye (Supervisor)
Abstract
Based on the importance of DNA/RNA binding proteins in different cellular processes, finding binding sites of them play crucial role in many applications, like designing drug/vaccine, designing protein, and cancer control. Many studies target this issue and try to improve the prediction accuracy with three strategies: complex neural-network structures, various types of inputs, and ML methods to extract input features. But due to the growing volume of sequences, these methods face serious processing challenges. So, this paper presents KDeep, based on CNN-LSTM and the primary form of DNA/RNA sequences as input. As the key feature improving the prediction accuracy, we propose a new encoding...
Cross-Lingual Speaker Adaptation for Statistical Parametric Speech Synthesis
, M.Sc. Thesis Sharif University of Technology ; Sameti, Hossein (Supervisor)
Abstract
Speech synthesis and its applications have been very attractive recently. The main purpose of this technique is to produce a speech signal with natural characteristics of human speech like prosody and emotion. Among all existing methods for speech synthesis, statistical parametric speech synthesis methods are more promising because ofhigher flexibility in comparison to other methods. One of the applications of speech synthesis is speech to speech translation. In these systems, the generated voice in target language should have the same characteristics as the input voice in source language. The main purpose of this research is to review and evaluate the cross lingual speaker adaptation...
Hydroelastic Analysis of Surface Piercing Propeller
, M.Sc. Thesis Sharif University of Technology ; Seif, Mohamad Saeed (Supervisor)
Abstract
Surface piercing propellers are particular type of supercavitating propellers that are commonly used for High-speed vessels. Most studies on this type of propellers has been investigating the hydrodynamic forces. But in recent years with increase in SPPs diameter used in vessels, structural analysis of this type of propellers is considered. For this purpose, studies on the stresses exerted on the propeller structures under load is done with the help of Hydro elastic methods. In this type of analysis, structura of propeller is intended to be flexible and Displacements under pressure checked and Tensions resulting from it are studied.
The present Thesis using ANSYS software to analyze a...
The present Thesis using ANSYS software to analyze a...
Design of Low-Power Zero Temperature Coefficient (ZTC) CMOS Oscillators
, M.Sc. Thesis Sharif University of Technology ; Akbar, Fatemeh (Supervisor)
Abstract
The increasing demand for autonomous vehicles and reliable communication protocols and hardware interfaces, such as CAN bus and USB, underscores the necessity for stable clock sources that maintain a low temperature coefficient (TC) over wide temperature ranges. This demand is particularly emphasized in applications such as wearables, network sensors, downhole devices, WSNs, and IoT, where long-lasting battery life and frequency-stable clock sources over a broad temperature range (e.g. -20 °C to 100 °C) are crucial. Traditionally, variations in frequency caused by temperature have been mitigated by employing off-chip components like crystals or ceramic based oscillators, but this approach...
Data-Driven Pricing Based on Demand Prediction Using Machine Learning Methods
, M.Sc. Thesis Sharif University of Technology ; Sedghi, Nafiseh (Supervisor)
Abstract
Pricing plays an important and essential role in the profit and income of companies. The importance of pricing is not only related to its role in the company's profitability, but it also changes the customer's understanding and loyalty towards the company and can create the company's reputation or destroy it. Determining the right price will increase product sales and increase customer loyalty and create a competitive advantage for the company. One of the most important and influential variables in product pricing is the amount of demand. The main challenge of companies for product pricing is the uncertainty in their demand. In order to deal with this problem, data-driven pricing is used....
Silica chloride/wet SiO2 as a novel heterogeneous system for the deprotection of acetals under mild conditions [electronic resource]
, Article Phosphorus, Sulfur, and Silicon and the Related Elements ; Volume 178:2667-2670, Issue 12, 2003 ; Pourjavadi, Ali ; Zolfigol, Mohammad Ali ; Bamoniri, Abdolhamid
Abstract
A combination of silica chloride and wet SiO2 was used as an effective deacetalizating agent for the conversion of acetals to their corresponding carbonyl derivatives under mild and heterogeneous condition
Numerical investigation of effects of uniform magnetic field on heat transfer around a sphere
, Article International Journal of Heat and Mass Transfer ; Volume 114 , 2017 , Pages 703-714 ; 00179310 (ISSN) ; Molaei Dehkordi, A ; Abbasi, F ; Sharif University of Technology
Elsevier Ltd
2017
Abstract
In this article, ferrohydrodynamic forced-convection heat transfer from a heated sphere embedded in a ferrofluid in the presence of the uniform external magnetic field has been studied numerically for the first time over a wide range of Reynolds number value, nanoparticle diameter, particle volume fraction, and magnetic field intensity. Despite the uniform external magnetic field applied, the internal magnetic field near the sphere could be nonuniform due to the considerable difference between the relative magnetic permeability of the sphere and the surrounding medium. Kelvin body force arises from this nonuniformity and induces vortexes near the sphere. These vortexes disturb the boundary...
On the catalysis capability of transition metal oxide nanoparticles in upgrading of heavy petroleum residue by supercritical water
, Article Journal of Supercritical Fluids ; Volume 126 , 2017 , Pages 14-24 ; 08968446 (ISSN) ; Golmohammadi, M ; Ahmadi, S. J ; Towfighi, J ; Heidari Chenari, A ; Sharif University of Technology
Elsevier B.V
2017
Abstract
Vacuum residue cracking has been successfully conducted under supercritical water condition in presence of various metal oxide nanocalysts, namely NiO, CuO, ZnO, Co2O3, and Cr2O3 synthesized at supercritical water. The cracking experiments were carried out at 450 °C. Three species of cracking: maltene, asphaltene, and coke were then weighed and their corresponding speciation was defined. Gas chromatography-mass spectrometry (GC–MS), nuclear magnetic resonance spectroscopy (NMR), thermogravimetric analysis (TGA), and elemental analysis (CHNS) tests were utilized to prove the performance of upgrading reactions. It was revealed that NiO showed the best performance among other catalyst, in which...
Effect of EPS beads in lightening a typical zeolite and cement-treated sand
, Article Bulletin of Engineering Geology and the Environment ; Volume 80, Issue 11 , 2021 , Pages 8615-8632 ; 14359529 (ISSN) ; Ebrahimi, S. A ; MolaAbasi, H ; Jamshidi Chenari, R ; Payan, M ; Sharif University of Technology
Springer Science and Business Media Deutschland GmbH
2021
Abstract
The current study aims to assess the influence of EPS beads inclusion on the strength properties of stabilized poorly-graded sands. Various contents of zeolite and cement as stabilizing agents, with the total amounts of 4, 8, and 12% by dry soil weight, and also 0, 0.25, and 0.5% weight ratios of EPS beads (η) are examined. Zeolite is opted among a variety of pozzolanic materials so as to replace a part of cement (0, 10, 30, 50, 70, and 90%) due to its superior environmentally friendly properties. The stress–strain behavior, unconfined compressive strength (UCS), peak strain energy (Eu), and California bearing capacity (CBR) of the zeolite and cement-treated sand-EPS beads mixtures are...
The Impact of AV and CAV Vehicles on Capacity and Traffic Flow with Cooperative Lane changing in Mixed Traffic Environment
, M.Sc. Thesis Sharif University of Technology ; Nassiri, Habibollah (Supervisor)
Abstract
Autonomous vehicles, as an integral part of intelligent transportation systems, will play a significant role in the future of transportation services. These vehicles have a high potential to improve road traffic capacity and the efficiency of transportation systems. One type of autonomous vehicle is the connected and autonomous vehicle (CAV), which can communicate with each other, roadside units, traffic control signals, and other infrastructures or devices. This study investigates the impact of autonomous vehicles and connected and autonomous vehicles on the traffic flow of the Tehran-Karaj freeway and vice versa, under various penetration rates and in a mixed traffic environment. In this...
A method for simulation of vapour cloud explosions based on computational fluid dynamics (CFD)
, Article Journal of Loss Prevention in the Process Industries ; Volume 24, Issue 5 , 2011 , Pages 638-647 ; 09504230 (ISSN) ; Rashtchian, D ; Abbasi, T ; Abbasi, S.A ; Sharif University of Technology
2011
Abstract
The effectiveness of the application of CFD to vapour cloud explosion (VCE) modelling depends on the accuracy with which geometrical details of the obstacles likely to be encountered by the vapour cloud are represented and the correctness with which turbulence is predicted. This is because the severity of a VCE strongly depends on the types of obstacles encountered by the cloud undergoing combustion; the turbulence generated by the obstacles influences flame speed and feeds the process of explosion through enhanced mixing of fuel and oxidant. In this paper a CFD-based method is proposed on the basis of the author's finding that among the various models available for assessing turbulence, the...
Thin film graphene oxide membrane: challenges and gas separation potential
, Article Korean Journal of Chemical Engineering ; Volume 35, Issue 5 , May , 2018 , Pages 1174-1184 ; 02561115 (ISSN) ; Karimi Sabet, J ; Ghotbi, C ; Abbasi, Z ; Sharif University of Technology
Springer New York LLC
2018
Abstract
Graphene oxide membranes were prepared by vacuum and pressurized ultrafiltration methods on the 12% modified Polyacrylonitrile (12mPAN) substrate to specify challenges, salient features, future directions, and potential of GO membrane for separation fields using characterization techniques and gas separation test (studied gases are CO2, He and N2), which is an efficient tool for better understanding of GO membrane behavior. GO membrane structure was examined over a wide range of parameters, such as pore size range of substrate and its surface properties, pH of GO dispersion, GO content, synthesis pressure, operating pressure and temperature. The results show that the GO content does not hold...
Conversion of CO into CO2 by high active and stable PdNi nanoparticles supported on a metal-organic framework
, Article Frontiers of Chemical Science and Engineering ; 2021 ; 20950179 (ISSN) ; Karimi Sabet, J ; Abbasi, Z ; Ghotbi, C ; Sharif University of Technology
Higher Education Press Limited Company
2021
Abstract
The solubility of Pd(NO3)2 in water is moderate whereas it is completely soluble in diluted HNO3 solution. Pd/MIL-101(Cr) and Pd/MIL-101-NH2(Cr) were synthesized by aqueous solution of Pd(NO3)2 and Pd(NO3)2 solution in dilute HNO3 and used for CO oxidation reaction. The catalysts synthesized with Pd(NO3)2 solution in dilute HNO3 showed lower activity. The aqueous solution of Pd(NO3)2 was used for synthesis of mono-metal Ni, Pd and bimetallic PdNi nanoparticles with various molar ratios supported on MOF. Pd70Ni30/MIL-101(Cr) catalyst showed higher activity than monometallic counterparts and Pd + Ni physical mixture due to the strong synergistic effect of PdNi nanoparticles, high distribution...
Conversion of CO into CO2 by high active and stable PdNi nanoparticles supported on a metal-organic framework
, Article Frontiers of Chemical Science and Engineering ; 2021 ; 20950179 (ISSN) ; Karimi Sabet, J ; Abbasi, Z ; Ghotbi, C ; Sharif University of Technology
Higher Education Press Limited Company
2021
Abstract
The solubility of Pd(NO3)2 in water is moderate whereas it is completely soluble in diluted HNO3 solution. Pd/MIL-101(Cr) and Pd/MIL-101-NH2(Cr) were synthesized by aqueous solution of Pd(NO3)2 and Pd(NO3)2 solution in dilute HNO3 and used for CO oxidation reaction. The catalysts synthesized with Pd(NO3)2 solution in dilute HNO3 showed lower activity. The aqueous solution of Pd(NO3)2 was used for synthesis of mono-metal Ni, Pd and bimetallic PdNi nanoparticles with various molar ratios supported on MOF. Pd70Ni30/MIL-101(Cr) catalyst showed higher activity than monometallic counterparts and Pd + Ni physical mixture due to the strong synergistic effect of PdNi nanoparticles, high distribution...
Conversion of CO into CO2 by high active and stable PdNi nanoparticles supported on a metal-organic framework
, Article Frontiers of Chemical Science and Engineering ; Volume 16, Issue 7 , 2022 , Pages 1139-1148 ; 20950179 (ISSN) ; Karimi Sabet, J ; Abbasi, Z ; Ghotbi, C ; Sharif University of Technology
Higher Education Press Limited Company
2022
Abstract
The solubility of Pd(NO3)2 in water is moderate whereas it is completely soluble in diluted HNO3 solution. Pd/MIL-101(Cr) and Pd/MIL-101-NH2(Cr) were synthesized by aqueous solution of Pd(NO3)2 and Pd(NO3)2 solution in dilute HNO3 and used for CO oxidation reaction. The catalysts synthesized with Pd(NO3)2 solution in dilute HNO3 showed lower activity. The aqueous solution of Pd(NO3)2 was used for synthesis of mono-metal Ni, Pd and bimetallic PdNi nanoparticles with various molar ratios supported on MOF. Pd70Ni30/MIL-101(Cr) catalyst showed higher activity than monometallic counterparts and Pd + Ni physical mixture due to the strong synergistic effect of PdNi nanoparticles, high distribution...