Sharif Digital Repository

Present study is aimed to investigate the relationship between blade shape of Savonius rotor and its optimum overlap, an important parameter that can improve the rotor's performance superbly. To set a relation between rotor's shape and its overlap, a new parameter called "trailing angle" was introduced in this study and by a novel design method, several models were designed to represent a wide range of trailing angles. The investigation has been carried out by using Reynolds Stress Method (RSM) through ANSYS Fluent commercial software package. The application of the method was validated by comparing the results of a conventional model with experimental data acquired from one of the... 

For the first time since 1940 and presentation of theodorson's theory, distribution of thrust, torque and efficiency along the blade of a counter rotating propeller axial fan was studied with a novel method in this research. A constant chord, constant pitch symmetric fan was investigated with Reynolds Stress Turbulence method in this project and H.E.S. method was utilized to obtain distribution profiles from C.F.D. tests outcome. C.F.D. test results were validated by estimation from Playlic's analytical method. Final results proved ability of H.E.S. method to obtain distribution profiles from C.F.D test results and demonstrated interesting facts about effects of solidity and differences... 

Control of MMA polymerization batch reactor has intensively investigated. The nonlinear and time varying behavior of the system makes its control a challenging task. MPC algorithm is enjoying an increasing application for control of chemical processes. A sequential linearized model based predictive controller based on the DMC algorithm was designed to control the temperature of a batch MMA polymerization reactor. A genetic algorithm (GA) is suggested to optimize the cost function of DMC. The controller performance was studied via simulation. The controller performance in tracking the profile, noise and disturbances rejection is very good  

In this paper, we report on a periodic metallo-dielectric structure that supports geometry-induced surface plasmons in the sub-terahertz regime. The proposed structure is made up of a dielectric-coated metallic grating sandwiched by parallel metal plates. Based on the modal analysis of 2D and 3D structures, the impact of a metal cladding and a customized dielectric coating on the dispersion relation and field distribution of the guided surface wave is investigated. It is found that modal field confinement is improved in the presence of a metal cladding without narrowing the operational bandwidth of the waveguide. Moreover, a customized subwavelength-sized dielectric coating based on... 

In this paper, we present a Gaussian to tophat beam shaper (GTBS) based on an all-dielectric metasurface lens for sub terahertz (sub-THz) applications. In order to calculate the required phase profile of the GTBS, we use an analytical procedure based on the geometrical transformation technique. The calculated phase profile is then realized by a silicon (Si) metasurface lens consisting of rectangular-shaped pillars of subwavelength dimensions. Because of large solution domain relative to the operation wavelength, we combined the beam envelope and the finite element methods to simulate the structure with a high precision. By designing an anti-reflection metasurface made up of periodically... 

In this paper, we report on the design, simulation and measurement of a flat-top beam shaper (FBS) lens for a millimeter-wave (mm-wave) antenna coupled source. The beam shaper is designed to transform the pseudo-Gaussian beam of the mm-wave source into a flat-top beam of sharp roll-off at a specific distance in the Fresnel region. Firstly, relying on the geometrical optics principles, we propose an analytical formulation for the design of lens profiles. Next, a simple optimization method based on the full-wave simulation of the lens and the mm-wave antenna is suggested to tune the analytically extracted lens profile. The optimized lens profile is then studied to assess its performance... 

In this paper, we report on a periodic metallo-dielectric structure that supports geometry-induced surface plasmons in the sub-terahertz regime. The proposed structure is made up of a dielectric-coated metallic grating sandwiched by parallel metal plates. Based on the modal analysis of 2D and 3D structures, the impact of a metal cladding and a customized dielectric coating on the dispersion relation and field distribution of the guided surface wave is investigated. It is found that modal field confinement is improved in the presence of a metal cladding without narrowing the operational bandwidth of the waveguide. Moreover, a customized subwavelength-sized dielectric coating based on... 

In this paper, we report on the design, simulation and measurement of a flat-top beam shaper (FBS) lens for a millimeter-wave (mm-wave) antenna coupled source. The beam shaper is designed to transform the pseudo-Gaussian beam of the mm-wave source into a flat-top beam of sharp roll-off at a specific distance in the Fresnel region. Firstly, relying on the geometrical optics principles, we propose an analytical formulation for the design of lens profiles. Next, a simple optimization method based on the full-wave simulation of the lens and the mm-wave antenna is suggested to tune the analytically extracted lens profile. The optimized lens profile is then studied to assess its performance... 

Dielectric gratings (DGs) have recently been introduced as a new platform for guiding dielectric-based geometrically-induced surface plasmons (SPs) called spoof SPs (SSPs). In this paper, we report on the modal analysis of a metal-clad DG waveguide and compare its performance with other counterparts including the dielectric image guide (IG) and the metal grating (MG) waveguide. The proposed DG waveguide is made up of a periodic array of high-resistivity silicon (HR-Si) pillars on a metal plate with a metal cladding at a proper distance above the structure. By modal analysis of 2D and 3D structures, we show that the presence of the metal cladding enhances the modal field confinement without... 

Dielectric grating-based spoof surface plasmonic (SSP) structures are among the recent low-loss and subwavelength field-concentrating solutions for realizing high-density terahertz (THz) and sub-THz integrated circuits. In this paper, we report on a novel waveguide structure capable of supporting highly confined SSP mode while exhibiting much lower propagation loss compared to other similar SSP structures. The proposed structure is composed of two perfectly aligned identical silica ridges placed on the inner faces of the metallic plates of a parallel plate waveguide with a proper plate distancing in order to leave an empty gap region between the ridges. Each of the ridges embodies a periodic... 

The properties of W-15 wt.%Cu composites were investigated by preparing two distinct composites of micrometer and nanoscale structures. Micrometer composite was produced by mixing elemental W and Cu powders and nanometer one was synthesized through a mechanochemical reaction between WO3 and CuO powders. Subsequent compaction and sintering process was performed to ensure maximum possible densification at 1000-1200 °C temperatures. Finally, the behavior of produced samples including relative density, hardness, compressive strength, electrical conductivity, coefficient of thermal expansion (CTE) and room temperature corrosion resistance were examined. Among the composites, nano-structured... 

Generalized frequency division multiplexing (GFDM) is one of the multicarrier modulation candidates proposed for the 5th generation of wireless networks. Among GFDM linear receivers, GFDM MMSE receiver achieves the best error performance for multipath fading channels at the cost of high numerical complexity. Hence, the combination of GFDM match filter (MF) receiver and double-side successive interference cancellation (DSIC) method is used instead. However, there is a significant gap between the error performance of GFDM MMSE and DSIC/MF receivers for the case of employing modern channel coding. Recently, we have proposed a new multicarrier scheme based on GFDM architecture called generalized... 

Generalized Frequency Division Multiplexing (GFDM) is a cyclic filtered multicarrier modulation that may be employed for many new wireless applications. However, due to its non-orthogonal structure, a trade-off between the complexity and error performance should be considered in the design of GFDM receivers. This study proposes an orthogonal cyclic filtered multicarrier modulation called Generalized Orthogonal Frequency Division Multiplexing (GOFDM), which is based on the cyclic Perfect Reconstruction-Quadrature Mirror Filter (PR-QMF) bank. We first derive the frequency domain matrix descriptions for GOFDM linear receivers based on which, the impact of PR-QMF bank on the GOFDM error... 

Energy resources in Iran consist of the fourth largest oil reserves and the second largest natural gas reserves in the world. At present, due to political reasons, the investment trend does not go over well. Based on the Fifth Development Strategy, Iran needs $200 billion of investment in the country's first industry (i.e. oil), and given the objectives of the perspective document, the country needs more than $500 billion investment during the next 15 years. This paper examined Iran's energy status. Afterwards, oil future scenarios which developed by Research center of Iranian parliament, have been analyzed. Then four scenarios that express different modes of production and consumption are... 

Present study introduces the vertical gap between the blades of a Savonius rotor's blades as a parameter that can enhance performance of the rotor. To provide comprehensive concept about application of gap between blades, two different models were tested in different working conditions and working regimes. The study completed by using R.S.M. turbulence model through ANSYS Fluent commercial software package. Utilization of the method was validated by comparing results of a conventional model with experimental data from one of the references. Results of the study proved that application of a proper gap between blades can improve rotor's moment coefficient by 20 percent; however, the amount of... 

In order to fabricate nanofiber scaffold for bone tissue engineering, electrospinning technique was employed. This technique produces nanofiberous scaffold supporting cell adhesion, migration, and proliferation. Here, we developed a novel conductive scaffold from poly-caprolactone, gelatin, and poly aniline/graphene nanoparticles. In this study, co-electrospinning was utilized to fabricate composite electrospun scaffold. The effect of polyaniline/graphene (PAG) nanoparticles on the mechanical properties and electrical conductivity of this hybrid scaffold was investigated. The result showed that PAG nanoparticles enbance both mechanical properties and electrical conductivity of the scaffolds.... 

In this article, the problem of simultaneous heat, mass, and momentum transfer in the developing region of tubular reactors with homogeneous chemical reaction and laminar power-law fluid flow under unsteady-state conditions has been solved. In this regard, the general governing equations were solved using finite-difference method and analyzed carefully. Moreover, the influences of various parameters and dimensionless numbers such as power-law index, heat of reaction, reaction order, and Damköhler number value on the numerical results were investigated. In addition, the numerical results obtained for the fully-developed velocity distribution of Newtonian fluid flow and Sherwood number value... 

Human hepatocellular carcinoma (HCC) has been recognized as one of the significant causes of mortality around the globe. In recent years, extensive research has been carried out to find a deep-rooted perception of mechanisms involved in the pathogenesis of the disease to develop novel strategies for compassionate diagnostic and therapeutic tools. In this regard, nanotechnology has presented great opportunities in HCC diagnosis and treatment by selective and specific targeting, and efficient delivery to reach sufficient doses in targeted tumor areas without adverse influences or minimal damage to normal cells. Herein, different Nanomedicine-mediated strategies for HCC therapy are reviewed...