Sharif Digital Repository

Transonic flow study is important due to its vast applications. Supercritical airfoils are designed for transonic flow to postpone drag divergence and reduce the strength of shock. This type of airfoils are chiefly used in modern commercial airplanes because of their low drag in transonic regime and, as a result, reduction in their fuel consumption. Using supercritical airfoils needs accurate investigation of flow field due to several influential factors such as specific geometry, nonlinear nature of flow phenomena, and compressibility effects. However, the availability of experimental and numerical data for supercritical airfoils is less than that of the conventional ones. Thus,... 

SCADA controls, audits and accesses data but is only attributed for controlling and carrying out measurements on a large scale. In the SCADA, gathering of information starts from the PLC and after interpretation morphs into a format that can be shown to the user of the control room. In the SCADA system, many protocols are used to exchange information amongst logical controller units like DNP3, Profibus and Modbus. Many of the aforementioned protocols have been upgraded and are used in the Internet. The use in the Internet has led to vulnerability of SCADA from Internet hackers. Consequently, securing the SCADA system is essential for nationally sensitive structures. The goal of this thesis... 

In the present dissertation model based grasping of soft tissue with the laparoscopic gripper, tissue deformation under the applied load and control of the tissue-instrument interaction have been studied. As the first step a cantilevered beam under bending and tension has been modeled statically and dynamically using the meshless EFG based method. Results show that an increase in the number of nodes at the displacement boundary and the area of force insertion improves the accuracy of the predicted displacement in the model compared to the analytical solution. In the second step the model is developed for a hemisphere under vertical and lateral compression. Comparison of the deformation of... 

It is necessary to monitor pollutants in aquatic samples, because many of these compounds can pose threats to human health and the ecosystem. Separation technology based on magnetic materials has received considerable attention in recent years. The magnetic extraction method is not only convenient, economical and highly efficient, but it also overcomes problems with conventional solid-phase extraction. In order to remove anionic dyes from single and ternary systems, zinc ferrite nanoparticle was synthesized using co-precipitation method and its surface was modified by Cetyltrimethyl ammonium bromide (CTAB) cationic surfactant. Surface characteristics of ZFN-CTAB was studied using Fourier... 

To actualize and making the outputs of a project effectual, it is necessary to conduct an effective management during a project. This case may not be possible without accurately planning for activities, management and controlling all phases of a project ignoring the risk management of that project. If risks of a project cannot be detected before conducting a project, it is possible to challenge the performance and even effectiveness of the project. In current conditions, the most important problem of managers and executives of construction projects through the country is risk management of projects, not acknowledging with definitions of risk, models of risk management and lack of a model for... 

Optomechanical systems have attracted considerable attention in the last decade. Such a raising prominence is mainly due to its capability in providing new insight into the quantum behavior of macroscopic objects and exploring the interface between quantum and classical mechanics. Alongside this fundamental quest, cavity optomechanics has many other benefits, ranging from very precise measurements on forces and positions to quantum information processing. In this thesis, we investigate quantum properties of such systems. Particularly, we study cooling of the mechanical resonator toward its ground state and the entanglement between this mechanical resonator and the cavity field. Cooling the... 

As the number of processing cores on a single chip continues to grow, the need for a high band width, low power communication structure, will be the most important requirements of next generation chip multiprocessors. Today, a major part of power consumption in multi core architectures belongs to interconnects. Due to these facts, reducing consuming power, as well as supporting high performance, is concerned in these architectures. The concept of “network-on-chip” emerged to improve the performance of CMPs. But now a day, considering the circumstances of power budges, it’s incapable of presenting new strategies to decrease consuming power and delay. However, optical interconnects have the... 

We design a new algorithm for clustering data streams in any fixed di- mension, that use the framework of core-set to summarize data, in order to reduce the complexity of computation. Clustering is to separate data into distinct sets called clusters, which objects in the same cluster has the most similarity and objects in the different clusters has the least similarity.This problem has many application in the areas such as: machine learning,image processing, financial and stock transactions. Data stream has recently emerged as an important concept because in many applications, data is inherently streaming over a network or the data base is extremely large and sequential access is way faster... 

In 1953, Landau expressed the conditions for the existence of tournaments with a prescribed score vector R. Eleven years later, Ryser proposed an algorithm for constructing the tournament matrix with score vector R and showed that any two tournaments with the same score vector can be obtained from one another by a sequence of 3-cycle switches. Last year (2014) Brualdi and Fristcher explained in an article, similar to this process, the existence of, algorithm and switches for loopy tournament and Hankel tournament and similar structure skew-Hankel tournament. This paper is discussed in a chapter of this thesis. In 1991, De Caen found a lower bound for the real rank of a tournament matrix.... 

Ethylene-propylene-diene monomer rubber (EPDM) is one of the elastomers that shows non-polar behavior, high elasticity at low temperatures, excellent thermal and ozone resistance, and high electrical resistance. In this respect, it is used in various applications such as sealing materials, conveyor belts, waterproof materials, cables, etc. One of the most important applications of this rubber is its use as a sealing material. In this case, the resilience behavior plays an important role in the sealing behavior of the EPDM rubber. Especially in cases such as the car's hydraulic braking system where high service temperatures and dynamic stresses are applied, resilience behavior will be more... 

The aim of this study was to develop a method to determine the trace residual amounts of nonsteroidal anti-inflammatory drugs in meat-related samples and to study the effect of different cooking methods and storage conditions of meat before cooking as an effective factor on the fate of these drugs. To proceed this goal, a nanocomposite was prepared from polycaprolactone nanofiber/silica mesopores as green sorbent by electrospinning. The synthesized nanocomposite was implemented for micro-solid phase extraction of the desired drugs in conjunction with high performance liquid chromatography. Polycaprolactone, due to its excellent physical properties, availability, biodegradability,... 

Condition monitoring of a system refers to the process of measuring and analyzing the aging indicators of critical components of a system that can be harnessed to estimate the system’s health. One of the main interests in condition monitoring is to performing the scheduled maintenance activities for the system. Monitoring the status of the system reduces maintenance costs and prevents unwanted contingencies and outages in the system.
In power electronics, the capacitors are the most critical components of the system from the point of reliability. Capacitors are the leading cause of failure in the power electronic converters so, this essay attempts to attain a solution to monitor the... 

Cardiovascular diseases are one of the leading causes of death worldwide. Despite significant advances in therapeutic interventions for these diseases, the pathophysiology remains incompletely understood. Challenges in drug evaluation include the lack of appropriate clinical trials, such as conventional 2D cell cultures and animal studies, as well as the absence of model systems that can provide complex and patient-specific cardiac functions for diagnosis. Organ-on-a-chip devices have the potential to mimic the body's response to treatments by utilizing microscale cell culture fluid connections and creating realistic models of human organs of interest. Our objective is to develop a... 

The retina, a photosensitive area in the central nervous system, is delicate and intricate. It is susceptible to degenerative disorders such as age-related macular degeneration (AMD), retinitis pigmentosa (RP), Stargardt disease (SD), and glaucoma. These diseases can lead to severe vision loss and ultimately irreversible blindness by causing destruction or dysfunction of different types of retinal cells. Unfortunately, there are no proven treatment strategies to cure or reverse these degenerative disorders. However, cell transplantation therapies may be an alternative to replace distorted cells and improve an individual's vision. Recent clinical outcomes show that transplanted cells in the... 

In this study, at first modeling of a self-propelled microrobot and its hydrodynamic effects on flow field are investigated. Then, a cascade controller has been designed for the fully actuated microrobot in order to track the desired time trajectories. Next, in order to design an optimal controller to decrease energy consumption, regardless of tracking the desired orientation trajectory compared to the desired position trajectory, the fully actuated microrobot would change to over actuated microrobot. Thus, it would be able to orient freely itself according to the flow field so that reduce the energy consumption. By applying the optimal controller on the over actuated microrobot, it was... 

Disambiguating concepts in language is one of the most challenging tasks in the field of natural language processing and computational linguistics. A sort of these ambiguities can be found in metaphorical and metonymic concepts. In the present study, we try to introduce the structure of the detecting and disambiguating system of metaphor and metonymy. Detection step is based on semantic valency of the verbs occurring within the subject and object positions and the disambiguation step on the key topical concepts. The data of the detection step involves semantic valency of the seven metaphorically and metonymically frequent verbs. First of all, the data were collected by extracting the... 

Physical processes such as adsorption and membrane filtration are in progress and considered as efficient methods in separation and treatment of organic pollutants from petrochemical and colored wastewaters. The advantages of these methods include high energy efficiency, low cost, facile process, and regeneration and implementation ability for a wide range of contaminants. Nevertheless,requirement of suitable materials as adsorbents with high adsorption capacity, capability of preparing membranes based on these materials, optimization of process conditions and removal improvement have still remained as the main challenges; therefore, these topics have been mentioned as main aims of this...