Sharif Digital Repository

Equity in distribution is one of the most controversial and essential concepts which for a long time has been the central concern of political philosophers when considering planning concerns of the societies. Transport is a key field by which politicians and decision-makers impose their intention on societies. Although there have been studies discussing equity in transport, yet there is no clear mathematical framework to utilize the equity concept in transportation planning. This study has reviewed equity in transportation, as well as in human science studies to investigate and determine how transportation advantages should be equitably distributed among society members. This review has led... 

A new reduced-order modeling approach is presented. This approach is based on fluid eigenmodes and without using the static correction. The vortex lattice method is used to analyze unsteady flows over two-dimensional airfoils and three-dimensional wings. Eigenanalysis and reduced-order modeling are performed using a conventional method with and without the static correction technique. In addition to the conventional method, eigenanalysis and reduced-order modeling are also performed using the new proposed method, that is, without static correction requirement. Numerical examples are presented to demonstrate the accuracy and computational efficiency of the proposed method. Based on the... 

In this research work, Friction Theory and Free Volume Theory are applied to live oil characterized based on SARA TEST for viscosity modeling and make a new model in combination with two equation of state (PR and PC-SAFT). Parameters for pseudo-components are obtained by tuning the viscosity at atmospheric pressure and temperatures of 10, 20, and 40 ℃. A new fitting approach is suggested where the number of fitting parameters is 17 and 12 for FT and FVT model, respectively. These parameters are tuned using the Genetic Algorithm and Particle Swarm Optimization and make eight new models. The results show that PC-SAFT provides viscosity predictions for all models with less deviation from... 

Wax precipitation may occur in production or transportation of crude oil form field which is a serious problem in petroleum industry. Flow assurance issues concerning wax precipitation make it necessary to develop a precise thermodynamic model to predict the wax appearance temperature and amount of precipitation at different conditions. In this work a new procedure has been proposed to characterize crude oil based on the SARA test considering the wax and asphaltene as single pseudo components. Two scenarios have been investigated for the survey of the crude oil characterization, with and without asphaltene pseudo component. Also, in this work, the Perturbed Chain form of the Statistical... 

The influx of solid or liquid particles of drilling mud into the pores of rock or mud loss phenomenon and clay swelling can sometimes lead to severe productive formation damage and cause to wettability alterations of reservoir rock from hydrophilic to oleophilic. Therefore, designing an appropriate fluid that is compatible with formation fluids and could reduce reservoir damage and increase the productivity of wells is very important. The two main mechanisms of surfactants are reduction of the surface tension and wettability alteration of rock reservoir that are effective in taking the oil. Regarding the importance of the wettability in reservoir productivity, this article is aimed to study... 

The influx of solid or liquid particles of drilling mud into the pores of rock or mud loss phenomenon and clay swelling can sometimes lead to severe productive formation damage and cause to wettability alterations of reservoir rock from hydrophilic to oleophilic. Therefore, designing an appropriate fluid that is compatible with formation fluids and could reduce reservoir damage and increase the productivity of wells is very important. The two main mechanisms of surfactants are reduction of the surface tension and wettability alteration of rock reservoir that are effective in taking the oil. Regarding the importance of the wettability in reservoir productivity, this article is aimed to study... 

Low Grade Heat Driven Multi-effect Distillation and Desalination describes the development of advanced multi-effect evaporation technologies that are driven by low grade sensible heat, including process waste heat in refineries, heat rejection from diesel generators or microturbines, and solar and geothermal energy. The technologies discussed can be applied to desalination in remote areas, purifying produced water in oil-and-gas industries, and to re-concentrate process liquor in refineries.
This book is ideal for researchers, engineering scientists, graduate students, and industrial practitioners working in the desalination, petrochemical, and mineral refining sectors, helping them... 

In this work, a new model based on multilayer kinetic adsorption mechanism has been proposed to account asphaltene adsorption in porous media under dynamic condition and the model was verified using experimental data obtained in this work and also with those reported in the literature. In the proposed model two steps are considered for asphaltene adsorption. The first step is taken as adsorption of asphaltenes on the surface of the porous media and the second step is taken as adsorption of asphaltenes on the asphaltenes already adsorbed on the porous media. The Crank-Nicholson method, central difference in space and trapezoidal rule in time, giving second order convergence in time was... 

In this work, asphaltene adsorption in a sandstone core sample under dynamic conditions and during miscible CO2 injection was studied using live oil sample which is close to real conditions in petroleum reservoirs. In order to investigate of damage in sandstone core sample by the deposited material such as asphaltene, the morphology analysis of sandstone core sample using scanning electron microscopic method was studied. Also analyses of the adsorbed material in sandstone core sample by Soxhlet extraction using an azeotrope mixture and with SARA method were performed. The experimental results show that by increasing the flow rate of injected CO2, the amount of asphaltene in retained material... 

The process of asphaltene precipitation has a substantial effect on oil flow during primary oil production and enhanced oil recovery processes in the petroleum industry. In this work, a modified scaling model based on the PVT properties of bottom hole live oil including resin to asphaltene ratio, onset pressure, bubble point pressure, reservoir temperature, asphaltene content of bottom hole live oil and gas to oil ratio has been proposed to account for asphaltene precipitation under pressure depletion/gas injection conditions and the proposed model was verified using experimental data obtained in this work and also with those reported in the literature. In the proposed scaling model the... 

In this paper, oil recovery and permeability reduction of a tight sandstone core sample in miscible CO2 flooding processes due to asphaltene deposition were studied using an Iranian bottom hole live oil sample in order to distinguish between the mechanical plugging and adsorption mechanisms of asphaltene involved in the interfacial interaction of the asphaltene/mineral rock system. A novel experimental method was designed and proposed to measure the amount of deposited asphaltene due to different mechanisms using the cyclohexane or toluene reverse flooding and spectrophotometer. In this work, the bottom hole live oil sample was injected first to a long core and then CO 2 injection was... 

In this work, a new model based on the multilayer adsorption kinetic mechanism and four material balance equations for oil, asphaltene, gas, and water phase has been developed to account for asphaltene deposition in porous media under dynamic conditions and the model was verified using experimental data obtained in this work and also with those reported in the literature. The results showed that the developed model based on multilayer adsorption kinetic mechanism can correlate more accurately the oil flooding experimental data in comparison to the previous models based on the mechanical plugging mechanism, in particular in carbonate core samples. Also, a series of experiments was carried to... 

Asphaltene deposition causes serious problems in the oil industry. Variation of oil composition and reservoir pressure is reported to be the most important factors that influence asphaltene deposition from reservoir oil. In this study, a mathematical model was developed to simulate asphaltene deposition during primary depletion and CO2 injection. The main purpose of this study is to investigate and to compare asphaltene deposition mechanisms due to primary depletion and CO2 injection. The solid model as thermodynamic model was applied to investigate asphaltene precipitation. A numerical model was established to the governing equations both in space and time and model parameters were... 

Asphaltene precipitation may occur during pressure depletion or gas injection processes in a reservoir. This phenomenon is an important problem during oil production, because it can result in formation damage and the plugging of wellbore and surface facilities. In this work, the precipitation of asphaltenes in an Iranian crude oil, under different pressures, is measured, using an experimental set up based on high-pressure isothermal expansion and also atmospheric titration. For the particular oil investigated, compositional data, precipitation phase diagrams, and bubble point and onset pressures are reported. Also, in this work, the Perturbed Chain form of the Statistical Associating Fluid... 

In this work, experimental studies were conducted to determine the effect of asphaltene deposition on the permeability reduction and porosity reduction of carbonate, sandstone and dolomite rock samples using an Iranian bottom hole live oil sample which is close to reservoir conditions, whereas in the majority of previous work, a mixture of recombined oil (a mixture of dead oil and associated gas) was injected into a core sample which is far from reservoir conditions. The effect of the oil injection rate on asphaltene deposition and permeability reduction was studied. The experimental results showed that an increase in the oil injection flow rate can result in an increase in asphaltene...