Sharif Digital Repository

In this thesis we are going to improve an ultrasonic flowmeter accuracy by considering the influence of different parameters like temperature, pressure, etc. Firstl of all different cases of flow condition in which ultrasonic flowmeter may work are specified, then velocity and temperature profile of pipe flow are determined using Fluent software. In thr next step ultrasonic pulses transmitted are simulated by the use of code written in Matlab to find wave travel time in the flow. Evetually an accurate relation of calibration for flowmeter is determined by the use of travel time and all other flow properties to evaluate the accuracy of flowmeter in diffent cases. Relation extracted can be... 

Effects of temperature on the behavior of soils and rocks have been studied widely in recent years. Following the need for understanding the effects of temperature on the behavior of clayey soils, several experimental and numerical studies on thermo-mechanical behavior of clayey soils have been carried out and a number of thermo-mechanical constitutive models have been developed for saturated and unsaturated clayey soils. In this research, a two-yield surface thermo-plastic constitutive model developed by Abuel-Naga et al. (2007, 2009), has been chosen for THM analysis of the behavior of saturated clayey soils. This constitutive model is based on Modified Cam-Clay (MCC) model. The MCC model... 

The PCP theorem is the result of a line of work on interactive proofs and probabilistically checkable proofs. The first theorem relating standard proofs and probabilistically checkable proofs is NEXP?PCP[poly(n),poly(n)] . Subsequently, the method used in the proof of this statement were extended to yield a proof of the PCP theorem. However, this proof is relatively long and complicated. The PCP theorem is equivalent to hardness of approximation of some optimization problems. In 2006, Irit Dinur discovered a different proof of the PCP theorem. Dinur’s proof is a rather shorter and simpler than original proof. The main purpose of this survey is to present the main concepts and tools used in... 

Through the recent years application of FRP material in structural engineering has been developed significantly. According to possible changes of a building function during its lifetime or alteration of the building codes, building structures usually need to be strengthened. Referring to merits of FRP material, its application seems to be a convenient idea toward the cited requirement. Curved beam and slab are known as highly used elements in building structures. Bridges composed of horizontal or vertical arches could be noted as common examples which need to be reinforced by FRP. However curved concrete surfaces, reinforced by FRP plates, seem to be studied than it is really required; For,... 

Studying the performance of irregular structures in past earthquakes reveals that due to their severe vulnerability, we need to accurately assess the behavioral characteristics of such structures. On the other hand, all existing seismic codes recommend the use of response modification factor to determine the base shear, design forces of the members, and the design drift ratios, which seem to have limited comprehensiveness. Moreover, the response modification factor for a structural system is discussed in a general manner and the effect of factors such as number of bays, number of stories, span length, story height and irregularities are not considered. In this research, the effects of... 

One drawback of polypropylene (PP) as a widely-used semicrystalline thermoplastic is its low toughness at sub-zero temperatures. Along with adding elastomers to PP as impact modifiers, modification of PP’s crystalline structure by means of beta-phase nucleating agents —beta being the toughest polymorph of PP —is a standard method of improving PP’s toughness. Nucleation efficiency is highly dependent on the optimum dispersion of the nucleating agent. Therefore, improving the dispersion of the nucleating agents assumes an essential role. The objective of this study is to determine the influence of the incorporation method of calcium pimelate (CaPi), a highly-selective beta nucleating agent, on... 

Static recrystllization in low carbon steel after two type of deformation –sidepress as an inhomogeneous deformation and rolling as a common industrial process - has been simulated using Cellular Automata (CA). The finite element method was utilized to compute the strain and stored energy distribution due to deformation. The initial microstructures were created by simulation of recrystallization with homogeneous site-saturated nucleation and topologic deformation was also considered in model. Subsequently using the result of FEM, stored energy of deformation was calculated and transferred into a two dimensional CA lattice. Nucleation rate and grain boundary velocity were considered... 

In this thesis, type and importance of corporate social responsibility (CSR) based on Carroll’s framework was investigated among companies of Tehran Stock Exchange. Beside, the types of companies’ motivation to engage in CSR base on model of Garriga & Mele (2004) were studied. In addition, hypothesis 1) instrument motivation for companies of Tehran Bourse is more attractive than the other type of motivations 2) companies that have higher income, have higher costs in CSR was tested. Using questionnaire tool and help of descriptive and inferential statistical analysis, questions and assumptions was studied and results illustrated that legal and ethical dimensions is most-widely used definition... 

The construction industry is viewed as one with poor performance from the point of view of quality as compared to other industries such as service and manufacturing. Earlier field studies performed in Iran show low construction quality. Experts suggest that cultural factors are among the most important factors that lead to the difference between what is planned and what is constructed.
Unlike many other industries, the construction industry is yet to achieve wide-scale automation of processes. Therefore, majority of construction processes is heavily dependent on workers. In order to achieve higher performance in terms of quality and productivity, the practitioners and researchers should... 

Over the past few years, various studies have demonstrated that the complex networks can be used to model the structure and functions of human brain. Some of these studies indi- cated that diseases such as Alzheimer, Epilepsy, and Schizophrenia can cause changes in this network. The main idea behind the methods proposed to analyze human brain’s behav- ior, is to identify regions of the brain with specific tasks. Recent studies show that multiple regions of human brain are involved in complex activities, so it’s important to detect their interactions. Using functional high resolution multichannel neurophysiological signals, like electroencephalographic (EEG) and magnetoencephalographic...