Sharif Digital Repository

Stray capacitance of transformer winding is an important parasitic element influencing the behavior of the switching power converters, especially for high-voltage transformers. There are various methods for calculating the stray capacitance in transformers and inductors with ordered windings. However, an ordered winding is less likely with an increased number of turns and layers. In this paper, it is shown that a slight disorderliness in winding leads to a considerable difference between the value of winding stray capacitance of the former ordered winding and its slightly disordered scheme. Therefore, regular methods for calculating the stray capacitance have significant errors in a... 

Microwave power modules are the result of integration of vacuum tubes and their respective power supplies. In these modules, volume and weight are very important factors because the modules are used in many portable applications. There are many parameters that they affect the volume and weight of the microwave power module. High voltage issues are one of these factors because the required voltages of vacuum tubes are high voltage. Thermal management relates to the module volume directly. In high-voltage high-frequency converters as power supplies of vacuum tubes, parasitic elements of the transformer are dominant. Tuning the transformer parameters leads to variation in the volume of the... 

We introduce a Gentzen-style sequent calculus axiomatization for Basic Predicate Calculus. Our new axiomatization is an improvement of the previous axiomatizations, in the sense that it has the subformula property. In this system the cut rule is eliminated  

We introduce two Gentzen-style sequent calculus axiomatizations for conservative extensions of basic propositional logic. Our first axiomatization is an ipmrovement of [1], in the sense that it has a kind of the subformula property and is a slight modification of [6]. In this system the cut rule is eliminated. The second axiomatization is a classical conservative extension of basic propositional logic. Using these axiomatizations, we prove interpolation theorems for basic propositional logic. © 2001 Kluwer Academic Publishers  

In this paper we prove a bounded translation of intuitionistic prepositional logic into basic propositional logic. Our new theorem, compared with the translation theorem in [1], has the advantage that it gives an effective bound on the translation, depending on the complexity of formulas  

In high-voltage applications, due to the use of high-ratio step-up transformers, the value of parasitic capacitance of these transformers is large compared to the low-voltage transformers. Moreover In these applications it is prefered to use single-capacitor filters instead of filters with inductors. In this paper a simple electrical model for two-winding high frequency transformer considering all of the parasitic elements is presented. This model is used in a full-bridge based dc-dc converter with capacitive output filter controlled by phase-shifted method. The operation of this converter in DCM is analysed and its analytical relations in different time intervals is derived and confirmed by... 

High voltage power supplies (HVPS) are widely used to supply vacuum tubes. Regarding to their high efficiency, resonant converters are a choice of HVPS structure. In this application, HVPS is faced with wide variation of the load power. On the other hand, output voltage regulation over wide load range is essential. However, there are several problems dealing with resonant converters such as output voltage regulation and low-efficient performance in a light load. In this paper, a control scheme for a series-parallel resonant converter is presented. This scheme regulates the output voltage of the converter over load variation range. A variable inductor placed as the series inductor in the... 

The transformer leakage inductance (TLI) is an important parameter in the design phase of the isolated power supplies. Hence, the TLI estimation before the transformer construction is very useful for the designers. The previous works considered an ordered winding turn arrangement (WTA) for the transformers. This assumption considers only ideal windings which may result in a significant error from what will be achieved after the construction of the transformer. This article concentrates on the transformers with nonideal windings in which the turns are not ordered. The uneven distribution of the turns in the layers is mainly due to the wrapping machine error. Hence, for a specific transformer... 

In this paper, a new algorithm for solving the shortest loop design problem is presented. The shortest loop design problem is to find the shortest loop for an automated guided vehicle covering at least one edge of each department of a block layout. In this paper, first it is shown that this problem can be represented as a graph model. The properties of the presented model enable us to design a meta-heuristic based on ant colony system algorithm for solving the shortest loop design problem. Computational results show the efficiency of our algorithm in compare to the other techniques  

We study the interplay between the Kitaev and Ising interactions on a ladder geometry. We show that the ground state of the Kitaev ladder is a symmetry-protected topological (SPT) phase, which is protected by a Z2×Z2 symmetry. The nature of the SPT phase is confirmed by degeneracy of the entanglement spectrum. Nonlocal order parameters that indirectly measure phase factors (inequivalent projective representations of the symmetries) of the Z2×Z2 symmetry explicitly show the protection of the SPT phase under the Z2×Z2 symmetry. We derive the effective theory to describe the topological phase transition on the ladder geometry, which is given by a transverse field Ising model with/without... 

Line nanopatterns are produced on the positive photoresist by scanning near-field optical microscope (SNOM). A laser diode with a wavelength of 450 nm and a power of 250 mW as the light source and an aluminum coated nanoprobe with a 70 nm aperture at the tip apex have been employed. A neutral density filter has been used to control the exposure power of the photoresist. It is found that the changes induced by light in the photoresist can be detected by in situ shear force microscopy (ShFM), before the development of the photoresist. Scanning electron microscope (SEM) images of the developed photoresist have been used to optimize the scanning speed and the power required for exposure, in... 

A new face recognition method is proposed in this paper. The proposed method is based on fuzzy regularized linear discriminant analysis (FR-LDA) and combines the regularized linear discriminant analysis (R-LDA) and the fuzzy set theory. R-LDA is based on a new regularized Fisher's discriminant criterion, which is particularly robust against the small sample size problem compared to the traditional one used in LDA. In the proposed method, we calculate the membership degree matrix by Fuzzy K-nearest neighbor (FKNN) and then incorporate the membership degree into the definition of the between-class and within-class scatter matrices and get the fuzzy between-class and within-class scatter... 

The amount of stored energy is an important issue in the low-droop and high-precision pulse generation. Pulse forming network (PFN) simulating an open-ended transmission line seems to be useful due to its minimum stored energy. The drawbacks of the PFN include low-output pulse quality and constant pulsewidth, which limit their applications. Another limitation of generating rectangular pulses using PFN is that half of the charged voltage appears in the output when delivering the entire stored energy to the matched load. This paper proposes a structure of PFN-based pulse generator that overcomes the above-mentioned limitations. For continuous pulsewidth adjustment, a lossless scheme is... 

Graft copolymerization of methyl methacrylate (MMA) was carried out on bagasse fibers in an aqueous medium using eerie ammonium nitrate (CAN) as initiator under a neutral atmosphere. In order to obtain the optimum condition for graft copolymerization, the effects of initiator concentration, temperature, time of reaction, and monomer concentration were studied. The maximum grafting percent was found to be 122%. The bagasse grafted poly(methyl methacrylate) was characterized by FTIR and its thermal behavior was characterized by TGA. Copyright © 2008 WILEY-VCH Verlag GmbH & Co. KGaA