Sharif Digital Repository

Dam failure can result in a catastrophic break followed by a ood wave, often with considerable loss of life or property. One of the main causes of dam failure is loss of shear strength and the existence of discontinuity within the foundation. Dynamic analysis of concrete dams usually considered concrete behavior to be nonlinear and the foundation rock is assumed to be linear. In this study, seismic analysis of a concrete gravity dam was conducted to investigate the effect of the foundation on the nonlinear response. A finite element model of a dam-reservoir-foundation was considered to properly model the foundation as well as dam body nonlinear behaviors. An elasto-plastic formulation was... 

In the present paper, the nonlinear seismic behavior of a concrete gravity damreservoir- massed foundation system is studied focusing on the foundation material nonlinearity. For this purpose, a finite element program utilizing the elasto-plastic formulation for the foundation medium is provided considering the tensile and shear failure modes. Hoek-Brown and Mohr Coulomb criteria are used as the yield and plastic potential function of the shear failure mode, respectively; and in the tensile failure mode, various levels of the tensile strength are applied to the foundation. Bearing capacity is studied considering the localized plastic elements and forming the sliding path by plastic elements... 

A multistage decoder for the internally convolutionally coded fibre-optic time-hopping code division multiple access system recently introduced is considered. In this system, the decoder consists of several stages. The first stage is implemented using one of the single-user decoders introduced. The following stages are maximum likelihood (ML) decoders each of which use the decisions made by the previous stage. The performance of the proposed decoder is evaluated by a Monte Carlo simulation. Numerical results show that a multistage decoder with only two stages greatly outperforms the single-stage decoder with negligible increase in complexity. The authors also derive the Chernoff bound for... 

A new robust adaptive controller is developed for the control of the hepatitis B virus (HBV) infection inside the body. The non-linear HBV model has three state variables: uninfected cells, infected cells and free viruses. A control law is designed for the antiviral therapy such that the volume of infected cells and the volume of free viruses are decreased to their desired values which are zero. One control input represents the efficiency of drug therapy in inhibiting viral production and the other control input represents the efficiency of drug therapy in blocking new infection. The proposed controller ensures the stability and robust performance in the presence of parametric and... 

In this paper, a nonlinear adaptive control method is presented for the treatment of the Hepatitis B Virus (HBV) infection. Nonlinear dynamics of the HBV, modeling uncertainties and three state variables (the numbers of uninfected and infected cells and free viruses) are taken into account. The proposed control law is designed for the antiviral drug input such that the number of free viruses and consequently the number of infected cells decrease to the desired values. An adaptation law is also presented to overcome modeling uncertainties by updating estimations of the system parameters during the treatment period. The stability of the process and convergence to desired state values are... 

Hepatitis is one of the most perilous viral infectious diseases and many people suffer from it all around the world. In particular, hepatitis B is a terribly dangerous disease which may cause severe liver damage or cancer if it is not treated. Recently, several dynamic models have been developed from experimental studies for describing such diseases mathematically. The certainty of these dynamics models is questionable in realistic treatment processes. Thus, the modeling uncertainties should be considered in the dynamics, which necessitates employing robust control strategies capable to overcome these uncertainties. Accordingly, in this research, a control strategy is developed in order to... 

Metal organic frameworks (MOFs) UiO-66 (UiO stands for University of Oslo) and NH2-UiO-66 were prepared and characterized as sorbent (antidotal agents) for curcumin (CUR) adsorption. The structure of products were characterized by X-ray powder diffraction (XRD), Field emission scanning electron microscopy (FESEM), thermogravimetric analysis (TGA), Attenuated Total Reflectance-Fourier transform infrared spectroscopy (ATR-FTIR), and N2 adsorption–desorption measurements. FESEM showed NH2-UiO-66 displayed symmetrical crystals with triangular base pyramid morphology, with the particle size around 100 nm and uniform size distribution. Adsorption capacities of CUR/MOFs with different mass ratios... 

A low cytotoxic metal–organic framework (MOF) UiO-66 (UiO stands for University of Oslo) and NH2-UiO-66, that showed high cell viability of HFF-2 via 3-(4, 5-dimethylthiazol-2-yl) 2, 5-diphenyl tetrazolium assay, was reported as an effective adsorbent (antidotal) agents. The structure of MOFs was confirmed by Fourier transform infrared, Field emission scanning electron microscopy (FESEM) and X-ray diffraction. Thermal behavior of MOFs was investigated using with thermogravimetric analyzer in nitrogen atmosphere to check the thermal stability. FESEM showed NH2-UiO-66 displayed symmetrical crystals with triangular base pyramid morphology, with the particle size around 100 nm and uniform size... 

A low cytotoxic metal–organic framework (MOF) UiO-66 (UiO stands for University of Oslo) and NH2-UiO-66, that showed high cell viability of HFF-2 via 3-(4, 5-dimethylthiazol-2-yl) 2, 5-diphenyl tetrazolium assay, was reported as an effective adsorbent (antidotal) agents. The structure of MOFs was confirmed by Fourier transform infrared, Field emission scanning electron microscopy (FESEM) and X-ray diffraction. Thermal behavior of MOFs was investigated using with thermogravimetric analyzer in nitrogen atmosphere to check the thermal stability. FESEM showed NH2-UiO-66 displayed symmetrical crystals with triangular base pyramid morphology, with the particle size around 100 nm and uniform size... 

This paper is devoted to study the effects of pressure drop in heat exchangers on the dynamics of a free piston Stirling engine. First, the dynamic equations governing the pistons as well as the gas pressure equations for hot and cold spaces of the engine are extracted. Then, by substituting the obtained pressure equations into the dynamic relationships the final nonlinear dynamic equations governing the free piston Stirling engine are acquired. Next, effects of the gas pressure drop in heat exchangers on maximum strokes of the pistons and their velocities and accelerations are investigated. Furthermore, influences of pressure drop increase in the heat exchangers on maximum and minimum gas... 

In this paper, we address global non-fragile control and synchronization of a new fractional order chaotic system. First we inspect the chaotic behavior of the fractional order system under study and also find the lowest order (2.49) for the introduced dynamics to remain chaotic. Then, a necessary and sufficient condition which can be easily extended to other fractional-order systems is proposed in terms of Linear Matrix Inequality (LMI) to check whether the candidate state feedback controller with parameter uncertainty can guarantee zero convergence of error or not. In addition, the proposed method provides a global zero attraction of error that guarantees stability around all existing... 

The first step to locate Partial Discharge in power transformers is to find a model that can clearly explain the behavior of the winding in high-frequency. The detailed model is one of the models used for the study of PD. One of the fundamental problems of the described model is to find its parameters. And the accuracy in calculating these parameters has significant impact on reducing the simulation error and PD locating. The current paper seeks to calculate the parameters of the detailed model 20kv distribution transformer winding by using the finite element method (FEM). Comparing the results of this model with pulse waveforms obtained from the PD to the winding in the laboratory... 

A single-degree-of-freedom model is considered for flexible exercise bars based on the lumped-element approach. By considering the side segment of a flexible bar as a cantilever beam with an equivalent mass at the free end, its free-vibration response, as well as the forced response under the excitation of the grip, are expressed parametrically. Experiments are performed on a particular flexible bar (FLEXI-BAR) in order to obtain numerical values for quantifying the model's parameters. The model is also computationally simulated to study the response of the flexible bar to various excitations. The results are imported into a multi-segment musculoskeletal software (AnyBody), where the effect... 

While the differentiation factors have been widely used to differentiate mesenchymal stem cells (MSCs) into various cell types, they can cause harm at the same time. Therefore, it is beneficial to propose methods to differentiate MSCs without factors. Herein, magnetoelectric (ME) nanofibers were synthesized as the scaffold for the growth of MSCs and their differentiation into neural cells without factors. This nanocomposite takes the advantage of the synergies of the magnetostrictive filler, CoFe 2 O 4 nanoparticles (CFO), and piezoelectric polymer, polyvinylidene difluoride (PVDF). Graphene oxide nanosheets were decorated with CFO nanoparticles for a proper dispersion in the polymer through... 

We have investigated the piezoelectric response of the hydrogenated graphene oxide (H-G-SiO2) stacks both experimentally and theoretically. The piezoresponse force microscopy method and density-functional theory (DFT) calculations were used to study the piezoresponse effect of this structure from both experimental and computational point of views. A mono-layer graphene, made by chemical vapour deposition method, is deposited on Si/SiO2 substrate and its surface is then functionalized with hydrogen atoms. The vertical piezoresponse, observed by piezoresponse force microscopy, is measured to be about 2146 pC N-1, that is comparable to the reported state of the art piezoelectric materials such... 

Design of an Ultra-Wideband 3-dB quadrature (90°) Hybrid using ADS and HFSS softwares plus Measurement report are presented. Simultaneous Use of these two softwares lead to fast and accurate design procedure. The coupler is realized in broadside stripline and with the connection of coupled regions in tandem structure. The measured data agrees well with the expected values from simulations, and shows a good ultra wide bandwidth response over the frequency range of 1-10 GHz. Measurements showed an amplitude unbalance of ±1.5 dB, a phase unbalance of 90°±7° , and an isolation and a return loss characteristics of more than 14 dB over the frequency of 1 to 10 GHz  

The Ni-base superalloy GTD-111 is employed in high-power stationary gas turbines because of its high temperature strength and oxidation resistance. The temperature dependence of the tensile behavior of GTD-111 has been studied by tensile tests in the temperature range of 25-900°C with a constant strain rate of 10-4s-1. The results showed an abnormal tensile property variation with increasing temperature. The yield strength decreased slightly with temperature up to about 650°C and then increased between 650 and 750°C. Above 750°C, a rapid decrease in the yield strength was found. The tensile strength showed a similar behavior except for its maximum that occurred at 650°C. The elongation...