Sharif Digital Repository

In this thesis we investigated a two level seller-buyer supply chain by game theoretical approach. We formulated interaction between seller and buyer as stackelberg game. In seller-stackelberg game , seller role as leader and buyer as follower. likewise in buyer-stackelberg buyer is leader and seller is follower. In our model the demand is an equation in which the dependent variable is a linear function of three independent variables and a disturbance term. The three independent value in demand function are marketing cost , wholesale price , retailing price. The disturbance term in demand function has normal distribution by constant variance and zero expected value. Sale amount considered as... 

In this study the kinetic modeling of visbreaking reactions of heavy oils was investigated using available experimental data from the literatures. The continuous lumping model was developed for kinetic analysis of visbreaking reactions. The normalized boiling point was used to describe the reactant mixture as a continuous mixture and the concentration distribution of the mixture would change under reaction conditions. The continuous model with five adjustable parameters was used to describe visbreaking reactions and these parameters were optimized for each feed and reaction temperatures in the range of 400 to 430ºC using the available experimental data. Therefore for a special feed in a... 

The kinetics of side reactions in dehydrogenation of propane over a supported platinum catalyst modified by tin was investigated. Catalytic dehydrogenation over a commercial Pt-Sn/γ-Al2O3 was carried out in a laboratory-scale plug-flow reactor at 580 to 620oC under atmospheric pressure. Several kinetic models derived from different reaction mechanisms were tested using experimental data obtained over a range of reaction conditions. It was found that the kinetics of the main dehydrogenation reaction was best described in terms of a Langmuir-Hinshelwood mechanism where adsorption of propane was the rate controlling step. Simple power low rate expressions were used to express the kinetics of... 

The traders exchange currencies in an online foreign exchange market (Forex), so they need to know ways help them to predict trend of market. There are some methods to forecast exchange rate based on experiment. However they can submit good signals, they are too late for exchange. Two things are important, they should be correct and on time. In this research, we try to submit a prediction by Adaptive Methods in which provides both of them. In first approach, we test 468 models of Artificial Neural Network to achieve the best; and in second approach, Genetic Algorithm and Swarm Intelligence are applied to training Artificial Neural Network. Finally, in addition to forecasting exchange rate,... 

Government intervention in markets may go beyond the market regulation. Interventions may cause some idiosyncratic price distortions. It means the relative prices of factors to become different among firms. Therefore, micro conditions for firms will be changed. These will result in misallocation of factor production between firms and change in manufacturing TFP. According to data from about 14000 medium and small industrial firms in Iran, removing misallocation of production factors (capital and energy) and output idiosyncratic distortions between industrial firms would result in 115 percent increase in manufacturing TFP.

 

In this research a monopolist is considered which its object is maximization of profit during a predetermined period. Optimal control theory is used as a tool for determining of optimal trend for control variables. Price, warranty length and production rate are considered as control variables and cumulative demand and production are considered as state variables. Learning effect in production side and demand side are entered in the model too. In the demand side, learning effect shows its influences with movement of market from diffusion phase to saturation phase. In diffusion phase the demanded quantity of productions increases by increase of cumulative demand, on the contrary in the... 

In this research, a new metaheuristic algorithm is developed for solving the Discrete Time- Resource Trade off Problem in the field of project scheduling.In this problem ,a project contains activities interrelated by finish-start type precedence constraints and each has a specified work content and can be performed in different combinations of duration and resource requirement.Since the problem is NP-hard , the Particle Swarm Optimization is adopted due to minimization of the makespan subject to precedence relations and a single renewable resource. Basically PSO is used to solve continous problems and discrete problems have just begun to be solved by the discrete PSO.In proposed method,a... 

Nanotechnology requires a number of infrastructures for reaching its sustainable development. For each step of its development , various infrastructures should be studied and prepared in advance.In this direction, by introducing and recognizing the priority of Iran Nanotechnology R&D indexes ,the present research is going to propose an effective help. In this case, after studying the related literature and gathering the needed data , 27 indexes were recognized. Then , the indexes were divided in 7 criteria.In order to find the priority of the applied indexes , Fuzzy Multiple Criteria Decision Making (FMCDM) was applied. As the weighting of 7 criteria had been found by FANP , the... 

Propylene, as one of the most important raw materials of petrochemical industries, is produced through different methods. One of the major methods is propane dehydrogenation. This reaction is endothermic and many by-products will be produced in high temperature. Therefore catalytic dehydrogenation is preferred. Reduction in catalyst's activity and too many side reactions are the most important problems. Coke formation is the most effective reason of deactivation. Main source of coke is propylene. Experiments show that very small amount of water presence within reaction can reduce rate of coke formation. Water content growth does not always increase activity. If water be more than optimum... 

The study on the propane dehydrogenation process has been receiving significant attention due to the growing demand for propylene. The aim of this research is to develop an appropriate kinetic mechanism for dehydrogenation of propane over an industrial Pt–Sn/γ-Al2O3 catalyst in the presence of a very small amount of water. The reaction is carried out over the temperature range of 575 – 620 º C at atmospheric pressure. The results showed that a small amount of water and methanol can improve the performance of catalyst and also, increase the selectivity to COx. Addition the 0.5, 0.45, 0.3 water and 0.1, 0.05, 0.02 methanol are the optimum amount of these oxygenated compounds in order at... 

Asset and liability management is a method for optimizing cash flows of input and output of a bank . The model for optimizing the balance between liability and assets of a bank is presented in this research. Bank asset liability management and planning can be considered at the same time. In tjis model , all assets and liabilities in the bank balance sheet are discussed under different objectives and requirements , such as legal and administrate requirements, market condition, risk rate etc  

Jets originating from bottom (b) quarks, play an important role in the study of Standard Model processes together with the search for new physics. In the CMS experiment a considerable e?ort is dedicated to the development and the performance study of so-called b-tagging algorithms. On the other hand, the top quark which is produced in pair (tt¯) with a high rate at the LHC, decays near 99% of the time to a b-quark. Hence it provides a rich source of b-quark jets, suitable for b-jet identi?cation studies. In this thesis, a fully data-driven method to measure the b-tagging e?ciency, using top quark events in its semi-electron ?nal state, is developed. The results of the application of the... 

Fischer-Tropsch process (FT ) is one of the most important processes gas-to-liquid (GTL) conversion. This process converts synthesis gas into hydrocarbons. Depending on the catalyst and operating conditions of the process, heavy paraffins (Wax) are the most important products in this process. These products can be used to heavy paraffin catalyst hydrocracking in a process for the production of diesel fuel and gasoline to lighter products are suitable to be converted. The aim of this project is to develop a suitable kinetic model to describe the process of producing heavy paraffin hydrocracking process Fisher - Tropsch to be lighter products. In this regard, each 5 continuous mass model... 

A hierarchical production system in make-to-order environment is presented in this thesis. This production system is consisted of three different decision making levels. Maximum acceptance for production within customer specified time interval was done in the first stage, which is called order arriving stage, based on different client criteria, type of demanded product, and production system constraints. A new hierarchical decision making structure for accepting or rejecting arriving orders is proposed in this level. The output of this acceptance level is orders having maximum production system defined criteria, and minimum production cost along with order delivery time with minimum delay is... 

In Computer-Aided Process Planning, there are two ways of manufacturing called Variant Manufacturing and Generative Manufacturing. Variant Manufacturing is based on a data base from a part family for a project. The part family is made in a series of root sheets regarding the final form of the intended part. The data base is updated after the manufacturing of each part. In order to make the system intelligent, one can use the OPITZ coding system that specifies the geometrical form, geometrical details and part manufacturing operations in a 13-digit number. The aim of this research is to choose the best machining parameters according to time and cost, that, based on the basic principles of... 

In this thesis, a multi-stage project portfolio selection and scheduling problem in an uncertain environment is modeled, analyzed and solved. Moreover, we investigate the situations in which a project manager is confronted to a large number of projects to be selected and scheduled while the required resources of the projects are limited and renewable. The aim is to maximize objective function which is the net present value of the profit of the projects. To solve the mentioned problem, we introduce a multi-stage stochastic programming. For the reason that, in real problems, optimization problems that included all restraints are large scale and have computational complexity, these problems are... 

In the field of supply chain, management constantly seeks to adopt strategies for realizing its targeted objectives. The supply chain, therefore, includes integrated production-distribution processes with all effective parts where proper management requires a comprehensive and dynamic approach. It is necessary to meet required items at required time. This becomes more important with the supply systems providing items. On the other hand, the difficulty of supply chain management, decisions, and policy-making can be increased by a wide range of conditions such as changes in demand. Thus, a comprehensive approach is needed to take the present dynamics into account. The current paper develops a... 

In recent years in assembly line balancing area many researchers have focused on identifying and modeling real world situations in assembly lines in order to obtain more suitable model. As a result many generalized models have been developed in assembly line balancing area. However, designing efficient algorithms to solve these generalized problems has just begun. In this study it is aimed to design efficient algorithms to solve one of these generalized problems. Specificcally two hybrid genetic algorithms (GA) are proposed to solve assembly line balancing problem with sequence dependent setup times. Scheduling of tasks in the stations has been less considered in the literature of assembly... 

In this Thesis we study the string theory discription of non-relativistic quantum ?eld theories.In other statement we study the duality between gravity and gauge theory with non-relativistic symmetry.We discuss that this duality works in non rel- ativistic sense.We study two kind of non-relativistic theories that one of them camefrom string theory and other model obtained by special transformation of original relativistic theory and we see that how duality can be work for these models.Also dual picture of semi-classical string in the background that found from string theorystudied.We also study the motion of particle in a hot plasma and we ?nd a sign of non-relativisic duality really works  

The purpose of this research is the extraction of socio-economic factors (separation of household and household members) that affect the use of banking services in urban area of Iran. In this study we used data of the "family access to financial services in urban areas of Iran in 1387" that has been sampled by the department of economic statistics of central bank of Iran. The statistical information of this organization is in form of completed questionnaires and based on household addresses in a city and contains of 6055 urban household's information. In this project 15922 persons have been studied in urban households include the caretaker and the other family members. In addition to...