Sharif Digital Repository

Hydrothermal supercritical method is one of the most suitable methods for metal oxide nano powder, ceramics and mineral catalyst synthesis. Metal oxides nanopowder in its pure or mixed form has wide potential application as chemical industrial catalyst, hot Superconductors, magnetic material, gas sensors and car catalyst convertors. One of the most important metal oxides aspects of application is uranium oxide as nuclear reactor fuel is used. In addition, UO2 is selective catalyst for converting methane to methanol process and Decomposition of organic Chlorine material. In Supercritical hydrothermal method done in high pressure reactor with critical to fluid, is new method for the... 

Natural boron consists of two stable isotopes, mass 10 (19.3%) and mass 11 (80.7%). 10B isotope has a large thermal neutron capture cross-section and it therefore, used widely in such aspects as modern industry, military equipment, medical science and so on. specially the demand of atomic energy industry for the boron isotope is increased severely. So the separation of 10B from natural boron has received very wide attention at present. There are many kinds of methods on the boron isotopes separation, such as chemical exchange reaction and distillation in boron trifluoride method, ion exchange in boric acid solution method, counter current recycle membrane cascades in boron trifluoride... 

In this study the feasibility of xenon separation from xenon-krypton mixture was investigated by utilizing of the chromatographic column filled with nano and micron sized NaY zeolite. For this purpose the nano NaY with the yield of 100% related to Al2O3 and the average size of 98.6 nm was synthesized through the clear solution method with the mid-adding of NaOH. Furthermore, a novel method for granulation of nano zeolite was developed by utilizing sodium alginate as an external template. In this method the production of uniform spherical granules with the different sizes in the range of several milimiteres to 100 µm was easily performed. Moreover, the results showed that the adding of... 

Natural boron includes two stable isotopes 10B and 11B with 19.3 and 80.7 weight percent respectivley.10B isotope has a high thermal neutron absorption cross section. So isotope 10B material is suitable for making atomic reactor control rods. Other and even more important applications of 10B are in disclosing neutrons in order to measure neutron reactors fluxes and also are in nuclear physics laboratories and medical radiation. This isotope also is used in the pharmaceutical and the military industries. There are several methods for separating boron isotopes. Among the distillation methods, thermal diffusion of BF3, distillation of BF3, distillation of methyl borate, boric acid distillation... 

In this work, graphene oxide (GO) and Amino ethyl phosphonic acid (AEPA) functionalized graphene were synthesized using chemical method. In addition, reduced graphene was prepared by chemical and supercritical methods. Physical, chemical, morphological properties of as-synthesized materials were investigate using XRD, FTIR, RAMAN, UV, TEM, TGA, and BET. Thickness of monolayer GO which synthesized using Hummer’s method was evaluated 1 nm using AFM. FTIR and CHN results were affirmed the presence of AMPA onto graphene nanosheets. Adsorption properties of functionalized graphene for Th ions from aqueous solution was examined. Isotherm adsorption results demonstrated that maximum adsorption... 

Lithium has two stable isotopes naturally including 6Li at 7.5% and 7Li at 92.5% relative abundance. In spite of the similarities of lithium isotopes in common chemical reactions, they have some completely distinctive behaviors in nuclear reactions. 6Li has considerable neutron cross section capturing in thermal neutron range about 945 barns while this feature for 7Li is insignificant about 0.037 barns. This difference makes them to play different roles in nuclear uses. 7LiOH is applied for pH adjustment of coolant in light water reactors. 6Li is not only used as a shielding material against thermal neutrons, but also is known as a source of tritium in the blanket of fusion reactors which... 

One of the most convenient methods for the synthesis of metal oxide nanoparticles, inorganic ceramic materials and catalysts is supercritical hydrothermal method. In its pure form or mixed metal oxide nanoparticles have potential applications are wide. An important aspect of functional metal oxides of uranium dioxide as the selective catalyst for the conversion of methane to methanol and chlorinated organic matter decomposition is used. The main issue that led to the definition of this project was that nanoparticles synthesized with supercritical hydrothermal conditions influenced by change in the temperature. Temperature also affects the particle size and the conversion efficiency. This... 

Lithium has 9 isotopes which two isotopes are stable and remaining isotopes are unstable and have half-life. Lithium stable isotopes include 6Li and 7Li that their abundance is 7.53% and 92.47% respectively. Importance of lighter lithium isotope appears for its small cross section against thermal neutron and producing fusion reactors fuel in nuclear industries. Thermal neutron absorption cross section for 6Li and 7Li are 950 barn and 37 mbarn respectively. Interesting of these isotopes in nuclear industry is due to the large difference in the absorption cross section.6Li compounds implied for tritium producing in coat of nuclear fusion reactor with DT fuel. Following tritium is used in... 

Pretreatment of nuclear waste for valuable and limited uranium resources in the nuclear industry as well as environmental protection is imperative. Wash the affected parts of the Natanz uranium enrichment plant uranium centrifuges with a standard cleaning solution of citric acid, a liquid waste is generated in this study, the preparation of these residues using supercritical water oxidation (SCWO) and near critical (HTWO1) was studied as a result, the optimum operating conditions, and conditions of solvent extraction has been studied. In the result, the optimum operating conditions, and conditions of solvent extraction has been introduced. Also in the UCF2 as a liquid waste contaminated with... 

Along with the proliferation of pervasive systems such as RFID systems and sensor networks, the demand for the low-cost, secure-enough primitives has continued to rise. Symmetric-key algorithms especially block ciphers still play an important role as secure ciphers that can be also consistent with the inherent restrictions of pervasive systems. Recently, a lot of block ciphers tailored for these conditions have been designed, such as Present, PrintCipher, Piccolo, and Twine. Biclique attack introduced in AsiaCrypt 2011 is the first and the only method that could break all versions of AES faster than brute-force attack in the single key model. Afterwards, the efficiency of this attack on some... 

This thesis encompasses two parallel, but independent subjects as follow: The first part of the thesis deals with synthesis of bimetallic Ni-Au nanoparticles (Bi Ni-Au), and application of them as electrodes in the methanol fuel cells. The Bi Ni-Au nanoparticles for this purpose were synthesized by controlled reduction of HAuCl3 and NiCl3 in the aqueous medium using NaBH4 as reductant and PVP as stabilizer, and immobilized on the surface of a glassy carbon (GC) electrode by means of Nafion polymer. The obtained electrode then was conditioned in an alkaline solution by cyclic voltammetric method in potential range 100 -700 mV (vs. Ag/AgCl). Physicochemical characterizations of the... 

One of the newest methods of rapid prototyping is SLS . In this day, SLS is more common in compare others methods, because it uses little time and man does not nearly interfere in the producing stages of part which is made by SLS method. Also, sophisticated parts, which cannot be built by other methods, can be produced by SLS method. One of the disadvantages of SLS method is low dimensions accuracy of parts produced in this way. This problem has two major reasons: Shrinkage and Warpage. These two phenomena are created because of ununiformed temperature distribution. Others features which have effect on dimensions accuracy are residual stress, porosity and removing space of between powder... 

Petroleum is the main source of energy in the world. So, exploration and production of this strategic matter from earth and sea has a major importance. A large amount of this black gold is hidden under deep seas floors and extraction of these sources requires knowledge of design and technology of construction of deep water offshore platforms and equipments. Convetional Tension Leg Platform (CTLP), configured as 4 cloumns and 4 pontoons, is one of deep offshore platforms moored by several pretensioned tethers. The dynamic behavior characteristics of CTLPs are extracted in this thesis by numerical modeling of CTLP and regular wave interaction. A computer program PARADISE is developed in... 

The present study was aimed at investigating the use of platinum and platinum nanoparticles stabilized on zeolite as catalyst for the reduction reaction of p-nitrotoluene as one of the dangerous pollutants. The adsorption properties of platinum based on zeolite have been studied for some heavy metals. Monodispersed platinum nanoparticles were synthesized through reduction of H2PtCl6 by ethanol in the presence of polyvinyl pyrrolidone (PVP) as a stabilizer, and then were immobilized on four types of zeolites. The study then focused on elaboration of the catalytic activity of the nano catalysts under different operational conditions. In order to investigate the catalytic properties, operating... 

I-131 isotope is one of the most significant radio medicines for treatments of the thyroid cancer and nuclear tomography of thyroid. As for purification of this radioisotope several methods have been developed among which adsorption-desorption on metallic copper is the most promising. The current study is aimed at elaboration of the kinetics behavior of the different types of metallic copper for adsorption of iodine vapor. The used copper samples included plain and silica-supported Cu nanoparticles as well as micronized copper. The silica-supported Cu nanoparticles were prepared by impregnation of highly porous silica (≈500 m2/g) in Cu(NO3)2 solution, heating of the solution to above... 

In this study, epoxy resin has been modified by nano-clay additives using direct mixing method and epoxy-clay nanocomposites were designed and produced with optimized percentage of clay content. By adding the powder of born carbide and lead oxide in nanocomposites new compounds are obtained. The results are used for protection against neutron and gamma rays, respectively. After preparation of epoxy-clay-born carbide and epoxy- clay-lead oxide nanocomposite the effects of irradiation and carbon fiber on mechanical and thermal properties of nanocomposites were examined. The Nanocomposites were exposed to Electron Beam Irradiation (EBI) in 100 and 500 kGy doses to investigate the effect of... 

Lithium has two stable isotopes, 6Li and 7Li. Abundance of these isotopes are 7.53% and 92.43% respectively. Each isotope has an important role in nuclear industry. For example, 6Li compounds is used in production of tritium in nuclear fusion reactors coated with DT fuel and as fuel in nuclear fusion reactors that operate with laser inertial confinement method applied. 7LiOH is used to adjust the pH of the fluid coolant in light water reactors and also in Breeding Reactors. Lithium isotope separation in different ways so far been brought into operation. The other aspect to this work, it can be both continuous and batch for action. Lithium isotopes for the first time by electrolysis using...