Sharif Digital Repository

The objective of this research is to investigate fluid flow in cracked porous media. Fluid, mass, and heat transfer in porous and cracked porous media, particularly in subsurface environments characterized by complexity and uncertainty—such as hydraulic fracturing, lowـpressure groundwater flow, and more—are of great importance in the oil and geothermal energy industries. The problem domain consists of three main sections: the saturated porous medium, the crack or channel within this porous medium, and the boundary layer between the crack and the adjacent environment. The phase field method is utilized in this study to model these discontinuities. Phase field models are similar to... 

In this thesis, the effect of heart dynamic motion and pulsatile inflow on blood hemodynamics and LDL permeation into the arterial wall in a 3-D coronary artery bifurcation was investigated. To determine the effect of each factor alone and simultaneous effect of both factors i.e. heart dynamic motion and pulsatile inflow, flow simulations were performed in four cases i.e. steady-static, steady-dynamic, pulsatile-static, and pulsatile-dynamic. The results of flow simulations showed that dynamic geometry and pulsatile inflow have considerable impact on temporal variations of wall shear stress (WSS), even though the effect of pulsatile inflow on WSS variation dominates over the effect of... 

Injecting liquid fuel into the cross flow of air provides high penetration of the liquid, rapid mixing with air, and increased efficiency. This method has widespread applications in the propulsion systems of gas turbines, scramjets, turbine blade cooling, and fuel injection for engine afterburners. One of the design strategies for future aircraft engines is to reduce pollutants using fuel spray into the cross flow instead of direct jet fuel injection and using renewable energy sources. The applications of cross flows include injecting fluid through rotating pressure injectors in exhaust flows, injecting fluid through pressure-rotating injectors in radial injectors, and using slinger... 

Due to the unique advantages of fluidized beds for solid mixing and heat transfer, they are widely used for the thermal processing of solid fuel particles. In practice, such systems are composed of non-conventional fuel particles such as coal or biomass, which are completely different in shape, size, and density from the bed material such as sand. In such systems, correct understanding of the main fluidization parameters such as the minimum fluidization velocity (Umf) of the bed components plays a key role in the successful design and control of the system. However, the onset of fluidization of irregular particles is not clear as it may vary depending on the physical properties of the... 

In small settling tanks, the sludges can be removed using perforated pipes. In this method the pipe is placed in the depth of a fluid and the lateral inflow through perforations lead to the outlet. Since there are few researches about hydraulic characteristic of perforated pipes, this research will investigate the hyadraulic characteristic of these pipes experimentally. One of the main objectives of these pipes is to use the entire lenghte of the pipe and also provide the uniform distribution of inflow. In the past studies, it was found out that inflow mostly comes through downstream perforations. The objective of this research is to find the distribution of discharge along the perporated... 

Since 1980s the electricity market has been gradually evolving from a monopoly market into a liberalized one for encouraging competition and improving efficiency. This brings the opportunity for generation companies (Gencos) to make more profits while embracing more risks of not being dispatched. Therefore, it has become a core interest for the Gencos to develop optimal bidding strategies to maximize the profits and minimize the risks while participating in such a competitive market. Error of determining day-ahead electricity price is one of the sources of the risk. Energy price has a high impact on bidding strategy optimization process. So it should be determined with low error which is not... 

The process of deregulation that has involved electricity many markets has introduced several new interesting research topics in power system area. This thesis addresses one of the most fascinating issues among them: the study of distributed generation both renewable and conventional integration in distribution networks. From the distribution network operator (DNO)'s point of view, it is of interest to develop a comprehensive methodology which considers various distributed generation technologies as an option for supplying the demand in distribution networks. In this thesis, the planning problem has been multi-objectively modeled. This will help the planner in decision making while knowing... 

Losses are unavoidable in any parts of power systems, from generation to receiving nodes and occur in transmission and distribution networks. However, the main loss component is produced in distribution networks. Energy losses in distribution networks are about 70% of technological transport energy losses.
Energy losses in distribution networks are an important indicator for the planning and operation of the system. A fast, reliable and accurate energy loss calculation method is required for optimal operation of the distribution networks.
Energy loss depends on network's operating conditions. Loads values and loads factors are time variables; therefore, methods based on probability... 

Restructuring and privatization in power system such as any industry leads to better market operation and more social welfare. Since two decade the power system in many countries have changed from monopoly to free market. In a restructured network the technical and economical aspects should be considered together. Ancillary services are needed for any power system to be operated in an optimal and secure manner. Reactive power and voltage regulation is one of the most important ancillary services in the network. this service should be supplied by its providers through a competitive market and system operator determines the optimal dispatch among different bids. The cost of purchasing reactive... 

This thesis addresses the problem of dynamic security assessment in power sys-tems with an emphasis on its application in restructured power systems and issues arising in its applications. The new electric utility environment has an immedi-ate consequence of emphasis on reliability and secure operation of power systems. This requires faster and more precise methods to assess the dynamic aspect of se-curity. On the other hand, this issue is becoming challenging when the determined dispatch might not be accommodated due to violation of the limits.This thesis addresses the problem of dynamic security assessment in power sys-tems with an emphasis on its application in restructured power systems... 

CHP (Combined Heat and Power) generates electricity and thermal energy simultaneously from input fuel. Since it has high energy efficiency and low installation time, it is an appropriate approach in energy management of residential complexes. In this project, stochastic programming based on Monte Carlo approach is used to handle uncertainties in the optimal sizing of CHP for residential complexes. Availability of CHP, boiler and AC bus as well as the electrical and thermal load forecast errors are considered as stochastic variables. Minimizing system total cost considering the probability of each scenario obtained from the scenario reduction algorithm is the objective function. The system... 

Uncertain fuel prices and also global climate changes are accompanied by some state initiatives such as renewable portfolio standards (RPS). This has caused a fast growth in the amount of renewable energy installed worldwide especially wind energy over last decades. However, the intrinsic characteristics of wind farms output power, i.e. intermittency and volatility of wind speed along with being non-dispatchable in output generation of wind turbine raises many new technical and financial challenges for power system operators and planners. Up to these issues, large level of wind power penetration causes a growing concern in wind energy curtailment issue which the wind farm’s operator may be... 

Electricity retailers are one of the power market entities which act as an intermediary between the producers in the wholesale market and the consumers in the retail side. The main task of a retailer in the power market is to set contract with the consumers to supply their electricity during a pre-specified time period and to participate in the wholesale market to supply the electricity needed by its costomers. Retailer’s contract with its customers may be a simple contract with a fixed pre-determined energy price or include some more complicated feathures such as involvement of a percent of green energy or variable price and demand response contracts. Moreover, retailer can supply its...