Sharif Digital Repository

Intelligent predictive maintenance is recognized as a cornerstone of Industry 4.0, where intelligent software is employed for the early detection of faults and the prevention of unexpected failures. Recent research indicates that the integration of multi-sensor data for fault diagnosis of gearboxes and bearings, using artificial intelligence models, has been successful. However, conventional methods face several challenges. These include an over-reliance on the signal characteristics of a single sensor and the impracticality of applying intelligent learning methods, particularly deep learning, despite their high potential, due to the unavailability of sufficiently large and diverse... 

New development in material fabrication resulted in functionally graded materials (FGM) with properties, can vary continuously based on the desired purpose. Vast applications of these materials attracted scientists to extend the researches in this area. One of the promising applications of these materials is in the optimized spherical and cylindrical pressure vessels. Optimization is usually based on the minimization of heat transfer and maximization of the strength of the vessel under pressure. In the present dissertation, spherical and cylindrical pressure vessels are designed and characteristics of the material distribution for certain pressure and temperature is developed. In this... 

Atomic force microscope (AFM) has a significant capability of imaging surface topography on an atomic scale. It is also widely used for Nanolithography in MEMS/NEMS (micro/nanoelectromechanical systems). Conventional AFMs consist of a cantilever with a sharp conical or pyramidal tip located at the free end of the cantilever that plays an important role in AFM measurements. Scanning across a surface, AFM interacts with the sample surface through its tip. Although the dynamic behavior of the AFM cantilever is complicated, the researchers have been interested in studying AFM dynamic behavior because it has a great influence on the surface imaging process. The imaging rate and contrast of... 

Co-movement between inflation and nominal interest in response to an interest rate shock, dubbed neo-fisherianism, has been the subject of contentious debate since the advent of non-inflationary ZLB environment. We design an economic model rich with banking features to understand the economic responses to permanent and long-term interest rate shocks. We find that responses to a permanent positive interest rate shock depend on the monetary authorities’ speculation of the new long-term inflation rate, with the most probable outcome being a permanent increase in inflation. Responses to a long-term positive interest rate shock depict an increase and then decrease in inflation. We also discover... 

FE simulations have been widely used to investigate the response of the brain tissue in various circumstances. The accuracy of the material models critically affects the results of the numerical simulation. However, despite the numerous studies aiming for the material modeling of the brain, there is still divergence between the results reported in the literature. A part of this discrepancy is due to the inherent difference between samples. Nonetheless, another part of it is resulted from the differences between testing protocols used by researchers. In some protocols multiple mechanical tests are performed on each sample. Enough recovery time should be considered between consecutive test... 

Micro electromechanical systems (MEMS) such as sensors and actuators are gaining more popularity in recent years. These systems have different application in automation, medicine and other industries. Mechanical structures are governed by electrical systems in MEMS devices and this is one of the challenges of MEMS studies. Usually these systems made by one deformable beam or plate over a fixed substrate. Due to applied voltage between substrate and deformable plate or beam, the deformable plate deflects toward the fixed substrate. The voltage at which the system becomes unstableis called pull-in voltage. Pull-in voltage is the most important characteristics of MEMS beyond which pull-in takes... 

In this thesis, the influence of nonideal boundary conditions on the vibration of a functionally graded beam excited by a moving oscillator on Pasternak-type viscoelastic foundation has been investigated. The beam has simply-supported boundary conditions and is assumed that the right-hand-side boundary conditions allows for small deflection, moment and axial force. The beam property gradient is assumed to be in the thickness direction and varies according to the power law distribution. The Hamilton's principle is utilized to obtain the governing equations of motion under the assumptions of Euler-Bernoulli beam theory. The equations of motion of the beam are solved using an... 

Epistemic logic gets its start with the recognition of the systematic properties of epistemic concepts. These properties make epistemic concepts amenable for formal study, and become our tools to present logical models for them.“Certainty” is one of these epistemic concepts for which no comprehensive logical model has been presented so far.
Among the logical models that have been presented for “Certainty”, there are two main models which are more comprehensive than the others and all the other models may be extendable to one of them. In this thesis, these two main logical models that have been proposed for the concept of certainty are introduced and described from a philosophical... 

Due to special characteristics, nowadays functionally graded materials are of great interest of researchers. Continuous change of properties in these materials,decreases undesirable phenomena such as stresscon centration. On the other hand knowing vibration parameters of structures such as natural frequencies, to avoid damage, is important. So far, many researches have been devoted to vibration analysis of structures, such as beams.In this dissertation, free vibration analysis of FGM beams, are investigated, using RKPM, a meshlesh method. The system of equations of motion is derived using Lagrange’s method under the assumption of Euler-Bernoulli beam theory. Buckling analysis of FGM beams... 

The ossicular chain of the human middle ear has a key role in sound conduction since it transfers vibrations from the tympanic membrane to the cochlea, connecting the outer and the inner part of the hearing organ. This study reports firstly a description of the main anatomical features of the middle ear to introduce a detailed survey of its biomechanics,focused on model development, with a collection of geometric, inertial and mechanical/material parameters. The joint issues are particularly discussed from the perspective of developing a model of the middle ear both explanatory and predictive. Such a survey underlines the remarkable dispersion of ... 

After Alzheimer and brain attack, the most common neurological disorder is epilepsy, which often involves seizures. In two-thirds of patients with epilepsy, the seizures can be controlled by antiepileptic drugs, and about 8% of patients can use epilepsy surgery; but unfortunately there is no acceptable treatment for the other 25% of these patients. Therefore preventing from epilepsy losses is a very important topic.
The gold standard for the diagnosis of the epilepsy is EEG monitoring. In this method, electrodes are placed on the scalp. Electrodes are uncomfortable to wear, and cause invasion to the patient, hence long-term monitoring and home monitoring is not feasible. In some... 

The purpose of this project is the analysis of free and forced vibrations of sandwich panels under moving loads. In order to analyze the problem, sandwich panels are modeled as composite square plates. By using third order shear deformation theory, equations of motion are derived. Equations of motion with six different boundary conditions are solved utilizing generalized differential quadrature method. Natural frequencies are obtained for simple cases reported in the literature.In addition, a sandwich panel under moving load with simply supported boundary conditions is analyzed and time series response of the middle point is obtained. The time series response is also studied parametrically... 

One of the main problems in human health, both in advanced societies and in growing societies, is a variety of cancers, one of which is brain tumor. One of the non-invasive methods of treating tumors is the use of ultrasound.HIFU (High Intensity Focused Ultrasound) therapy method is known as one of the most advanced surgical techniques in tumor ablation therapy. HIFU are produced and concentrated by powerful transducers. The two main mechanisms in HIFU are mechanical and thermal mechanisms, and the effects of these two mechanisms appear as thermal effects and cavitation. The fundamental mechanism in the HIFU is to absorb ultrasonic waves and to convert them into heat.The purpose of this... 

The injection process on cell is a very accurate and sensitive operation. This method is used for several new invented approaches such as tracytoplasmic Cell Injection or drug delivery. Controlling the injection force in micro scale is one of the problems of mentioned operations. Current huge and expensive laboratorial devices are helping the operators to do injection operation with :nore success. In this study a simple and novel microelectromechanical (MEMS) mechanism for doing injection process automatically on the biological cells is proposed. In order to controlling this device properly, we should model and simulate the operation condition from initial position to final condition. This... 

The ongoing Covid-19 pandemic has driven our attention to a simulation of virus dispersion to complete our understanding of airborne transmission. A myriad of studies have shown that respiratory diseases such as MERS, SARS, and COVID-19 can be transmitted by virus-laden droplets released during coughs, sneezing, and normal breathing. To mitigate and prevent the spread of such infectious diseases, investigation of the transmission routes is of great importance. This study has been fueled to harness the CFD tool to simulate the virus-laden droplets dispersion in hospitals inwards. Because of the limitations intertwined with experimental works such as the risk of infection of experimenters, and... 

According to the growing population and the need to make optimal use of available resources, the discussion of planning and scheduling in healthcare will be useful. One of the most expensive and lucrative sections in a hospital, which always spends a large percentage of renewable and non-renewable resources, is the Operating rooms (ORs). These ORs are the most important part of the hospital in terms of health and financial issues. In these scheduling problems, in order to be able to model the real situation, we needed to consider the recovery section integrated with the ORs. Also, the duration of surgery and stay in the recovery rooms are considered stochastic. In this study, we solve the... 

The need to supply energy of low voltage electronic circuits such as sensors and wireless systems has attracted many researchers in recent years. As a solution to this problem, the energy needed for electronic devices can be obtained from the surrounding environment. An important part of energy harvesters are the systems that use vibrating energy of mechanical devices known as vibration power generators. Most linear vibration generators are systems that operate in resonance mode. As the frequency of the environment moves away from the natural frequency of the generator, the amount of converted energy decreases significantly. For this reason, some solutions are needed to solve this problem. ... 

Quality of Experience (QoE) indicates the overall quality of one service such as Voice over IP (VoIP) from users' point of view by considering several systems, human, and contextual factors. QoE measurement and prediction are more challenging than Quality of Service (QoS) which is only related to network parameters. There exist various objective and subjective methods for QoE prediction. This research investigates various features affecting QoE by proposing a comprehensive subjective evaluation by employing a large number of users. We show that many unconsidered factors including speaker specifications and signal properties, such as signal-to-noise ratio (SNR), can affect QoE so that the SNR...