Sharif Digital Repository

Solute-solvent and solvent-solvent interactions were investigated in mixtures of ethylammonium propionate with methanol, ethanol, isopropanol and propanol. Solvatochromic parameters, including normalized polarity ( ), polarity/dipolarizability (p*), hydrogen-bond donor (a), and hydrogen-bond acceptor (ß) abilities, were determined in these mixtures. Parameters showed synergetic effects in mixtures of ionic liquid and alcohols due to the preferential solvation. General polarity shows an ideal behavior in all mixtures, polarity/dipolarizability exhibit increasing profile in all mixtures preferential salvation caused nonideal behavior for hydrogen-bond acceptor parameter Solvent... 

In this study insitu Al-Al3Ti-Al2O3 nanocomposite has been fabricated based on thermal decomposition of tialite (Al2TiO5) precursor in aluminium matrix through powder metallurgy method. Also the effect of high energy mechanical milling and hot extrusion on this procedure has been investigated. In the first step nano-structured tialite were synthesized through citrate sol gel methods. Then, different volume fraction of tialte was mixed with aluminium by high energy vibratory milling. The results of X-ray differaction analysis, scanning electron microscopy and differential thermal analysis showed that mechanical milling can degrade stability of tialite and cause strain-induced decomposition,... 

Nowadays environmental issues are of great importance and one of the most paramount issues is the quality of water, because clean water is vital to our existence. Besides different methods for water purification, water quality testing is a useful and needful tool. Traditional methods for determination of water quality parameters are mainly expensive, time consuming and require highly trained staff. In this study, we have described a centrifugal microfluidic platform (Lab- on – a- CD) for simultaneous determination of different physical and chemical parameters including Nitrite, Free Chlorine and pH. All of the processes from sample injection to detection are integrated on this low-cost and... 

Nowadays, cancer, which has been mentioned as the disease of the century, is the second leading cause of death throughout the world, and its incidence is constantly increasing. Isolation of circulating tumor cells is one of the most critical steps in diagnosing and controlling cancer progression. Due to the rarity of cancer cells compared to other cells in the blood sample, the isolation process requires optimal and high-precision devices. With the advent of inertial microfluidics, the ability to control the particles movement, the processing of blood samples as quickly and accurately as possible, and the viability of cells with a high percentage, introduced microfluidic systems as a... 

In wireless communication systems increasing the gain of antennas is seminal to increase in coverage and data transmission rate, and reducing the possible errors. One of the main factors for improving the antenna gain is matching the polarizations of the transmitter and the receiver antennas. Towards this end, both the transmitter and the receiver antennas should have the same axial ratio, specific direction and polarizations. As far as the flexibility of the direction angle between the transmitter and the receiver is concerned, the so-called circular polarization is preferred do the linear polarization. The antennas with circular polarizations are prominently utilized in satellites,... 

Microelectrode array technology is a broad platform for studying and characterization of the electrophysiological properties of excitable tissues derived from both brain and heart in vitro. Microelectrode arrays can either record or stimulate cells by accessing multiple sites of neural networks and cell tissues and detect signals from all sources around each electrode simultaneously. By using recorded signals, one can detect cell potential changes and its minor fluctuations. Unlike intracellular recording techniques, the noninvasive interface of microelectrode arrays with cells provides durable studying of neural networks and cell tissues. Using related microelectronics fabrication... 

This study has focused on the important problem of landing on a planet as an important current and future space mission. In this regard, dynamics modeling and integrated state estimation and control problems have been investigated in different views. To this aim, first a novel concurrent representation for translational and rotational kinematics has been developed based on the extension of modified Rodrigues parameters to dual space. This parameter set, called dual modified Rodrigues parameters (DMRP), is then utilized to establish an integrated roto-translational dynamic. The proposed DMRP-based kinematics and dynamics have been verified via comparison to traditional methods of... 

Nowdays a large number of companies are faced with Big Data processing. Due to the lack of budget or time, it may not be possible to process all the input data. Data variety is one of the main features of Big Data. Considering Data variety can help us to solve the problem of resource capacity. In this research, we focused on the impact of data variety on the performance of Big Data processing. In the first part, we offer a solution for increasing the performance of progressive Big Data processing. We provide a simple low-overhead mechanism to quickly assess the significance of each data portion, and show its effectiveness in finding the best ranking of data portions. We continue by... 

Currently, quantum noise stands as one of the foremost challenges in the realization of quantum algorithms and the development of quantum technologies. Consequently, finding methods to eliminate or reduce the impact of noise is imperative. This thesis explores the possibility of correcting the expectation values of observables on a quantum system, specifically a qubit quantum system experiences quantum noise, given partial knowledge of the noise. We begin by reviewing essential background information, including some of the most common methods for correcting noise, with a particular focus on the noise deconvolution technique. Subsequently, we introduce our method for correcting the... 

The prediction of deposition efficiency of submicron particles in the pulmonary alveoli has received special attention due to its importance for drug delivery systems, and for assessing air pollutants health risks. In this work, the pulmonary alveoli of a healthy human are idealized by a three dimensional honeycomb like configuration and a fluid-structure interaction analysis is performed to study the normal cyclic breathing hydrodynamics. A viscoelastic model is used for the mechanical behavior of alveolar wall tissue. In contrast to previous works in which the inlet flow rate is predefined, in this model a negative pressure is imposed on the outside surface of the alveolus which causes air... 

An acinus is defined as the complex of airways supplied by one first order respiratory or transitional bronchiole. In this part, the replenishment of oxygen at the alveolar surface occurs by a combination of convective air flow with diffusion of oxygen in the air. So for studying gas exchange in the lung, modeling gas species transport and exchange in an acinus is important. Due to lacking direct measurements of the distribution of oxygen (or carbon dioxide) concentration in the acinus, several mathematical models have been developed and studied by numerical simulations. But in none of them the influence of breathing pattern and the role of blood flow in restricting the gas exchange rate have... 

The increasing number of road accidents and fatalities have yielded the introduction of several solutions by related industries such as automobile manufacture. Proposed solutions can be classified into two categories: passive, such as airbags, and active such as ABS ad ITS-based technologies. Inter vehicles communication let the communication between vehicles(V2V) or between vehicles and road infrastructure (V2I) by relying on DSRC technology and standards. Intelligent Transportation System (ITS) has three main types of applications namely safety, traffic and commercial. Safety applications are the main goal of vehicular communication, and real time guarantee in safety applications is so... 

Reduction ships resistance is the major issues that always been about moving the ship into a water. In the course of research, many scientists have been interest to resistance reduction. It is important protect the body of ship against damage caused by sticking marine algae and crustaceans as protection against corrosive agents. Marine organisms such as algae, crustaceans and bacteria stick on submerged surfaces and increase the ship resistance. In this thesis resistance reduction using coating is evaluated. Foul release paint make smooth surface and low surface energy therefore ship with foul release coating experience lower drag contrast ship with another coating in the unfouled condition.... 

The present study examines both Direct Current (DC) and Alternating Current (AC) electroosmotic flows in a parallel plate microchannel. The method consists of a central finite difference scheme for spatial terms and a forward difference scheme for the temporal term. Asymmetric boundary conditions are assumed for Poison-Boltzmann equation used to determine the electric double layer (EDL) potential distribution. The potential distribution is then used to evaluate the velocity distribution for both DC and AC electroosmotic flows. The velocity distributions are obtained by applying slip boundary conditions on the walls to account for probable hydrophobicity of the surfaces. After determining the... 

In positioning and navigation, Sonar with utilization of sound waves in water environments is similar to the role of Radar in not watered (irrigated) environments. In the Sonar field, modeling and simulation of propagation of sound waves in the undersea environment is a fundamental and very important topic. Nowadays simulation is significant tool that allow to the researchers to predict the quality of Sonar function respect to the experimental conditions. For simulation and modeling of sound wave propagation are used two different methods; Wave theory and Ray theory. In the wave theory, because of the large volume of data, the interpretation of the results is hard. Also in this method cannot... 

In this thesis, the potential flow including unsteady partial cavitation around axisymmetric bodies are studied using a boundary element method (BEM) based on potential theory. For this purpose the wetted surface of the body and cavity surface are divided (approximated) to panels. Then, by applying the Green’s third identity and expressing this theory in potential flow around every surface, cavitation can be modeled by distributing the source and the dipole rings on cavity/body surface. In order to approaching this goal we introduced dipole rings distribution on the cavity and body surfaces and source rings distribution on the cavity surface. In this work the cavitation number is assumed to... 

Atherosclerosis is one of the most important and common causes of death in the world. Atherosclerosis typically affects medium and large arteries in the body and it leads to plaque formation in arterial wall. The first stage of plaque formation has been related to accumulation of low density lipoproteins in arterial wall.
The purpose of this research is presenting a four-layer model to describe the LDL transport in the arterial wall. The endothelium, intima, internal elastic lamina (IEL) and media are all treated as macroscopically homogeneous porous media and the volume-averaged porous media equations are employed to model various layers. The physiological parameters within the various... 

Nowadays providing services beyond the expected performance of users has become the most competition among telecommunication companies. Increase data rate at which a user is able to use a wireless system, you know that most of these companies are competing with each other. However, due to limited power to be sent to a transmitter, the first proposal to increase the data rate of wireless data transmission has a wider bandwidth. This results in increased bandwidth demand and thus sales by the government. During these years, many researchers have tried to increase efficiency in the use of broadband transceiver. These systems due to the wide band signal transmission and high-resolution mass... 

In this research, we consider the problem of guarding orthogonal polygon with sliding cameras. This problem is originated from the well-known Art Gallery problem. In the Art Gallery problem the goal is to guard the polygon with minimum number of guards. Each guard is considered as a point and can guard all the points inside the polygon that are in its visibility area. In sliding camera version, each guard is modeld as a horizontal or vertical segment which is entirely in the polygon. The guarding area of each camera is defined by its segment and its power. In 0-transmitter model, the guarding area of each camera is limited by the edges of polygon, but in the k-transmitter model cameras can...