Sharif Digital Repository

In this paper, a 4-DOF robotic arm for tool handling in laparoscopic surgery is introduced. The robot provides sufficient force to handle endoscopic tools used for large organ manipulation and is capable of measuring the tool-tissue forces. The RCM constraint is achieved using a spherical mechanism and roll and insertion motions are provided using time pulley and spindle-drive, respectively. The forward and inverse kinematics of the robot was solved and the dimensions of its links were determined, using particle swarm optimization method, so that the maximum kinematic and dynamic performance could be achieved  

The currently available robotic systems rely on rigid heart stabilizers to perform totally endoscopic coronary artery bypass (TECAB) surgery on beating hearts. Although such stabilizers facilitate the anastomosis procedure by immobilizing the heart and holding the surgery site steady, they can cause damage to the heart tissue and rupture of the capillary vessels, due to applying relatively large pressures on the epicardium. In this paper, we propose an advanced robotic approach to perform TECAB on a beating heart with minimal invasiveness. The idea comes from the fact that the main pulsations of the heart occur as excursions in normal direction, i.e., perpendicular to the heart surface. We... 

A new non-symmetric 5R-SPM is introduced and a geometrical approach is developed to analyze its configurations and singularities. The proposed methodology determines the type of configuration of a 5R-SPM, i.e. regular, singular, or out-of-workspace and also the type of singularity, i.e. instantaneous or finite, only based on geometric parameters and without solving verbose kinematic equations. It also provides insights into the workspace and singularities of 5R-SPMs, in the preliminary stage of design. The mechanism was analyzed by both the new geometrical approach and conventional methods for comparison. The geometrical approach could intuitively detect all the singularities observed by the... 

Color quantization is a technique for processing and reduction colors in image. The purposes of color quantization are displaying images on limited hardware, reduction use of storage media and accelerating image sending time. In this paper a hybrid algorithm of GA and Particle Swarm Optimization algorithms with FCM algorithm is proposed. Finally, some of color quantization algorithms are reviewed and compared with proposed algorithm. The results demonstrate Superior performance of proposed algorithm in comparison with other color quantization algorithms  

Calibrating the inverse kinematics of complex robots is often a challenging task. Finding analytical solutions is not always possible and the convergence of numerical methods is not guaranteed. The model-free approaches, based on machine learning and artificial intelligence, are fast and easy to work, however, they need a huge amount of experimental training data to provide acceptable results. In this article, we proposed a hybrid method to benefit the advantage of both model-based and model-free approaches. The forward kinematics of the robot is calibrated using a model-based approach, and its inverse kinematics using a neural network. Hence, while there is no need to solve the nonlinear... 

To have a complete model of a thunniform Fish-Robot, models of both body and tail are required. The dynamic model of the body is developed according to the parameters of a thunniform Fish-Robot built in MIT University, while, as the main part of this paper, the dynamic model of the tail is developed using fuzzy logic. Using experimental data and table look-up scheme, a fuzzy black box is introduced that gives the value of thrust force generated for any value of the Fish-Robot's input parameters: frequency of tail oscillation, amplitude of tail oscillation and speed of the Fish-Robot. In the second part, a trajectory fuzzy controller is designed for the Fish-Robot. The output of trajectory... 

To have a complete model of a thunniform Fish-Robot, models of both body and tail are required. The dynamic model of the body is developed according to the parameters of a thunniform Fish-Robot built in MIT University, while, as the main part of this paper, the dynamic model of the tail is developed using fuzzy logic. Using experimental data and table look-up scheme, a fuzzy black box is introduced that gives the value of thrust force generated for any value of the Fish-Robot's input parameters: frequency of tail oscillation, amplitude of tail oscillation and speed of the Fish-Robot. In the second part, a trajectory fuzzy controller is designed for the Fish-Robot. The output of trajectory... 

Comparison of the traditional linear heating method of TPD with an original stepwise heating scheme was reported for the first time. Stepwise heating TPD was carried out by keeping the temperature constant as soon as ammonia desorption signal rises until the signal returns to the baseline. More ammonia desorption peaks on a SAPO-34 catalyst were identified using TPD with stepwise heating. The effect of temperature ramp on desorption peak broadening in TPD curve was also addressed. The more distinct ammonia desorption peaks in stepwise TPD indicates that ammonia adsorbs in about five or six different ways on SAPO-34, and attribution of different adsorptions may be explained considering some... 

Most part of Iran is dominated by arid and semi-arid areas due to low annual rainfall. The need for production of fresh water from brackish water is considerably high, especially in dry regions. In this study 1 month daily-based experimental data from a solar still site has been reported. The technical and operational problems of this site which finally contributed to the total cease of the site are described. Then a detailed analysis is investigated on progress of a prototype which constructed in order to solve the site's problems. The results of 1 month of experimental data of the final design showed that the last prototype could be used to solve the current problems of the site. The... 

Hydrocracking is one of the most versatile petroleum refining processes for production of valuable products including gasoline, gas oil, and jet fuel. In this paper, a five-parameter continuous lumping model was used for kinetic modeling of hydrocracking of vacuum gas oil (VGO). The model parameters were estimated from industrial data obtained from a fixed bed reactor operating at an average temperature of 400°C and residence time of 0.3 h. Product distributions were obtained in terms of the weight fraction of various boiling point cuts. The model parameters were estimated using the Nelder-Mead optimization procedure and were correlated with temperature. Comparison of experimental and... 

Purpose - The purpose of this paper is to present an improved methodology for design of custom-made hip prostheses, through integration of advanced image processing, computer aided design (CAD) and additive manufacturing (AM) technologies. Design/methodology/approach - The proposed methodology for design of custom-made hip prostheses is based on an independent design criterion for each of the intra-medullary and extra-medullary portions of the prosthesis. The intra-medullar part of the prosthesis is designed using a more accurate and detailed description of the 3D geometry of the femoral intra-medullary cavity, including the septum calcar ridge, so that an improved fill and fit performance... 

In this letter, we propose a method for real-time high density impulse noise suppression from images. In our method, we first apply an impulse detector to identify the corrupted pixels and then employ an innovative weighted-average filter to restore them. The filter takes the nearest neighboring interpolated image as the initial image and computes the weights according to the relative positions of the corrupted and uncorrupted pixels. Experimental results show that the proposed method outperforms the best existing methods in both PSNR measure and visual quality and is quite suitable for real-time applications  

The disposal of used tires is a major environmental problem. With increasing interest on recovery of wastes, pyrolysis is considered as an alternative process for recovering some of the value in scrap tires. An accurate kinetic model is required to predict product yields during thermal or catalytic pyrolysis of scrap tires. Pyrolysis products contain a variety of hydrocarbons over a wide boiling range. A common approach for kinetic modeling of such complex systems is lumping where each lump is defined by a boiling point range. Available experimental data for thermal and catalytic pyrolysis of scrap tires from the literature were used to evaluate two types of lumping models; discrete and... 

Compared with flat linear structures, tubular linear machines do not face edge effects, making their performance better than their flat counterparts. In this article, a novel linear variable-reluctance resolver with tubular configuration is proposed. To optimize the design of an electromagnetic structure, modeling methods are used. Thus, in this article, an analytical model for the proposed resolver is presented. This model is based on the magnetic equivalent circuit (MEC) method and is considerably less time-consuming than finite element analysis (FEA), yet provides accurate results. A conformal mapping is employed to compute the permeance of the air-gap. The proposed model is then utilized... 

In Brukner and Zeilinger's interpretation of quantum mechanics, information is introduced as the most fundamental notion and the finiteness of information is considered as an essential feature of quantum systems. They also define a new measure of information which is inherently different from the Shannon information and try to show that the latter is not useful in defining the information content in a quantum object. Here, we show that there are serious problems in their approach which make their efforts unsatisfactory. The finiteness of information does not explain how objective results appear in experiments and what an instantaneous change in the so-called information vector (or catalog of... 

Low silicon content SAPO-34 was successfully synthesized using the conventional hydrothermal crystallization in the static condition. Effects of different synthesis conditions including crystallization temperature and the silicon source were investigated through X-ray diffraction patterns. It was concluded that the silicon source had a significant effect on silicon incorporation into the alumino-phosphate building blocks in the course of crystallization. Using precipitated silica instead of silica sol resulted in the formation of impurities of alumino-phosphates phases whose crystalline structures collapse at the high temperature of calcination. For the low silicon SAPO-34 synthesis, the...