Sharif Digital Repository

A numerical study on mixing/segregation phenomena in a pressurized fluidized bed with large particles of Geldart D type of binary density but same diameter with high velocity gas was performed by the use of discrete particle simulation. Particle mixtures are composed of spherical particles with 2mm diameter and 1g/cm3 flotsam density and different jetsam densities of 1.25, 2 and 2.5g/cm3 with jetsam volume fraction of 0.5. The particles are initially packed approaching perfect mixing state in a rectangular bed and then fluidized by gas uniformly injected at the bottom of the bed. Effect of increase of pressure and density ratio was investigated and mixing/segregation behavior is discussed in... 

This research focuses on a sensitivity analysis of accumulators configuration in a Large Break Loss of Coolant Accident (LB-LOCA) in Bushehr Nuclear Power Plant (BNPP). In this way, primary and secondary side components are modeled using RELAP5/MOD3.3 code. Having modeled the BNPP in a steady state hot full power operation, the thermal hydraulic consequences of a LB-LOCA in the reactor inlet is considered and sensitivity analysis for four major different configurations of accumulators are studied in detail. It is shown that any arrangement of accumulators in the Reactor Pressure Chamber (RPC) or Reactor Collection Chambers (RCC) leads to variation of fuel and clad temperatures during the... 

In this article, the vibration frequency of an orthotropic nanoplate under the effect of temperature change is investigated. Using nonlocal elasticity theory, governing equations are derived. Based on the generalized differential quadrature method for cantilever and propped cantilever boundary conditions, the frequencies of orthotropic nanoplates are considered and the obtained results are compared with valid reported results in the literature. The effects of temperature variation, small scale, different boundary conditions, aspect ratio, and length on natural nondimensional frequencies are studied. The present analysis is applicable for the design of rotating and nonrotating nano-devices... 

The nanostructures under rotation have high promising future to be used in nanomachines, nano-motors and nano-turbines. They are also one of the topics of interests and it is new in designing of rotating nano-systems. In this paper, the scaledependent vibration analysis of a nanoplate with consideration of the axial force due to the rotation has been investigated. The governing equation and boundary conditions are derived using the Hamilton's principle based on nonlocal elasticity theory. The boundary conditions of the nanoplate are considered as free-free in y direction and two clamped-free (cantilever plate) and clamped-simply (propped cantilever) in x direction. The equations have been... 

Gas-oil gravity drainage that takes place in the gas-invaded zone of fractured reservoirs is the main production mechanism of gas-cap drive fractured reservoirs as well as fractured reservoirs subjected to gas injection. Interaction of neighboring matrix blocks through reinfiltration and capillary continuity effects controls the efficiency of gravity drainage. Existence of capillary continuity between adjacent matrix block is likely to increase the ultimate recovery significantly. Liquid bridge formed in fractures has a significant role in maintaining the capillary continuity between two neighboring matrix blocks. The degree of capillary continuity is proportional to capillary pressure in... 

Background: Tetrabrombisphenol A (TBBPA) is one of the major brominated flame retardants (BFRs) used in waste mobile phone printed circuit boards (WMPPCB) that accounts for approximately 60% of the total BFR market. Methods: The potential of TBBPA removal from WMPPCB leached solution was investigated using micelle-enhanced ultrafiltration (MEUF) in the presence of cationic, anionic, and nonionic surfactants. The efficiency of several parameters including surfactant concentration, transmembrane pressure (TMP), pH, and TBBPA concentration, was evaluated to improve the MEUF. The optimal conditions were used to assess the MEUF for removing TBBPA in a real sample. Results: The cationic surfactant... 

Energy and economy play a substantial role in environmental issues such as the emission of greenhouse gases. CO2 is one of the greenhouses that is hugely produced in industrial processes and other human being activities. The major share of CO2 emission is related to the energy-related activities. As a result, modeling the amount of produced CO2 by utilization of different energy sources must be considered. Moreover, by considering economic indicators such as gross domestic product, the accuracy of the model could be improved. In the present work, artificial neural network (ANN) with two transfer functions including normalized radial basis and tansig is used to model CO2 production of... 

Static recrystallization and microstructural changes in austenitic stainless steel 304L were studied. The rolling experiments at 200 °C were carried out, and then, annealing treatment was made at temperatures ranging between 500 and 830 °C. A model was also developed to simulate the kinetics of non-isothermal recrystallization within the rolled steel. The distribution of plastic strains during rolling was predicted utilizing an elastic–plastic finite element formulation performed in ABAQUS/Explicit, while the predicted results were used to generate the as-rolled microstructure and to estimate the stored energy. Finally, microstructural–thermal model based on cellular automata was developed... 

In this work, non-isothermal annealing of cold-rolled 304L austenitic stainless steel was studied at temperatures ranging between 400 and 800 °C. In the first place, a dual-phase structure containing work-hardened austenite and strain-induced martensite was produced by means of multi-pass plate rolling, and then, the deformed steel was subjected to annealing heat treatments. To determine the distribution of stored strain energy in the rolling operations, an elastic–plastic finite-element modeling was conducted. Afterwards, an artificial neural network technique was coupled with the thermal-cellular automata model for prediction of martensite reversion, temperature history, and... 

A new conceptual framework of collective orientation in team contexts has recently been proposed in terms of vertical and horizontal dimensions of idiocentrism and allocentrism. A two-phase longitudinal study of 270 university students engaged in 86 academic groups partly confirmed the conceptualization by identifying four interpretable factors: vertical and horizontal idiocentrism, horizontal allocentrism, and avoiding arguments. The results of exploratory and confirmatory factor analyses and a structural model of relationships between the four dimensions in both phases of the study are reported in this article. © 2007 Sage Publications