Influence of cathode roughness on the performance of F8BT based organic-inorganic light emitting diodes

, Article Organic Electronics: physics, materials, applications ; Volume 16 , 2015 , Pages 87-94 ; 15661199 (ISSN) Alehdaghi, H ; Marandi, M ; Irajizad, A ; Taghavinia, N ; Sharif University of Technology

Elsevier 2015

Abstract

Hybrid light emitting diodes (HyLED) with a structure of FTO/ZnO/F8BT/MoO3/Au/Ag is fabricated and the influence of surface roughness of cathode (FTO/ZnO) is investigated. The roughness of FTO could be decreased from 9.2 nm to 2.2 nm using a mild polishing process. The ZnO film, deposited by spray pyrolysis, functions as an electron injection layer. The roughness of the FTO/ZnO surface is found also highly dependent on the ZnO thickness. For thin ZnO films (20 nm), polishing results in better efficacy and power efficiency of LED devices, with nearly a two times improvement. For thick ZnO films (210 nm), the overall FTO/ZnO roughness is almost independent of the FTO roughness, hence both...

Facile synthesis of gradient alloyed ZnxCd1- xS nanocrystals using a microwave-assisted method

, Article Journal of Alloys and Compounds ; Volume 586 , 2014 , Pages 380-384 Alehdaghi, H ; Marandi, M ; Molaei, M ; Iraji-zad, A ; Taghavinia, N ; Sharif University of Technology

2014

Abstract

We have synthesized ZnxCd1-xS nanocrystals (NCs) using a microwave assisted method. Zn(Ac)2, CdSO4 and Na2S2O3 were used as the precursors and thioglycerol (TG) was used as the capping agent. Na2S 2O3 is a photo and heat sensitive material, which supplies S species needed for the reaction upon dissociation. In this facile method, microwave irradiation provides the activation energy for the dissociation of Na2S2O3 in and leads to the formation of ZnxCd1-xS NCs in 2 min. The question that to what extent Zn is incorporated into CdS structure was addressed using UV-Vis spectroscopy, X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). Our results showed that the real value of x in...

Synthesis of ZnCdS Luminescent Nanoparticles for Hybrid Light Emitting Diode

, M.Sc. Thesis Sharif University of Technology Alehdaghi, Hassan (Author) ; Taghavinia, Nima (Supervisor) ; Irajizad, Azam (Supervisor)

Abstract

In recent decade energy crisis causes research on luminescent devises gains special importance. Particularly, hybrid LEDs (organic- nanocrystal) have been studied by a number of researches due to their advantages. Easy fabrication and narrow spectrum of radiation are mentioned as the most important benefits. The emissive layer is the most important part in these diodes which made of semiconductor nanoparticles. There are a variety of chemical methods for synthesis of semiconductor nanoparticles. We focus on aqueous method for nanoparticles synthesis because of its advantages. Alloyed semiconductor nanoparticles of ZnxCd1-xS were selected for this research work. The manifest features of the...

Investigating the different conditions on solution processed MoOx thin film in long lifetime fluorescent polymer light emitting diodes

, Article Materials Chemistry and Physics ; Volume 204 , 2018 , Pages 262-268 ; 02540584 (ISSN) Alehdaghi, H ; Marandi, M ; Irajizad, A ; Taghavinia, N ; Jang, J ; Zare, H ; Sharif University of Technology

Elsevier Ltd 2018

Abstract

Transition metal oxides are being more frequently used as hole injection layer (HIL) in organic light emitting diodes (OLEDs), in place of polymer HILs such as PEDOT:PSS. The very thin films of the metal oxide HILs are usually deposited using vapor deposition, in order to create uniform films. Here, we report OLEDs fabricated using solution processed MoOx films as the HIL and super yellow as the emissive layer. The performance of the devices is comparable to PEDOT:PSS based devices, while the stability tests show the lifetime of MoOx-based devices is 4 × 106 h, about 40 times longer than PEDOT:PSS devices, at typical working condition. X-ray photoelectron spectroscopy (XPS) indicates both...

Utilizing Metal Oxide as Hole/Electron Injection layer in Hybrid Light Emitting Diode

, Ph.D. Dissertation Sharif University of Technology Alehdaghi, Hassan (Author) ; Taghavinia, Nima (Supervisor) ; Irajizad, Azam (Supervisor) ; Marandi, Maziar (Supervisor)

Abstract

Organic light emitting diodes (OLEDs) are one of the main subjects of research in the organic electronic advanced technology. There are many advantages for OLEDs like self-emitting, high efficiency, wide vision angle, high contrast, and rapid response time. The main challenge in this area is the long-time stability of performance in air ambiance. Although the encapsulation process could overcome the instability problem, it increases the final cost. In this project, metal oxides have been utilized for the injection of electrons and holes in hybrid light emitting diodes (HyLEDs). In the first stage, inverted structure of HyLEDs with ZnO and MgxZn1-xO layers was fabricated and characterized....

Structural Design of a Launch Vehicle with Reusable First Stage

, M.Sc. Thesis Sharif University of Technology Hassan Jamaklu (Author) ; Haddadpour, Hassan (Supervisor)

Abstract

Aerodynamics loads and aeroheating during reentry, are one of the challenging issues in designing One of the main challenges in the design and application of reusable spacecrafts is the aerodynamic and thermal loads acting on their structures during reentry into the atmosphere. For this reason, all the concepts/prototypes presented in the 20th century were either not fully reusable, or were partially canceled, or did not have economic justification. In this report, the aerodynamic loads on the first stage of a launch vehicle during the launch and return phases have been investigated. Due to the fact that the main part of the first stage of the vehicle includes fuel and oxidizer tanks, the...

Optimal Trajectory Correction for Hazardous Near-Earth Asteroids

, M.Sc. Thesis Sharif University of Technology Farsi, Salman (Author) ; Zohoor, Hassan (Supervisor) ; Sayyadi, Hassan (Supervisor)

Abstract

The collision of moderately large asteroids and comets also referred to as Near-Earth Objects (NEO's) with earth would have catastrophic consequences. Such events have occurred in the past and may occur again in the future. However, for the first time in known history, humanity may have the technology required to counter this threat. Methods studied for mitigation of this hazard are based on deflecting asteroid's trajectory and are normally divided into two basic categories: high energy impulsive methods, and long-duration low-thrust methods. Two parts of mission to be optimized are the trajectory of spacecraft to reach the target and the deflection strategy which could be analyzed by the...

A revised version of ACO for cutting stock problem [electronic resource]

, Article International Journal of Industrial Engineering ; Vol 15, No 4 (2008), Pages 341-348 Eshghi, K. (Kourosh) ; Javanshir, Hassan ; Sharif University of Technology

Abstract

The one-dimensional cutting stock problem has many applications in industries and during the past few years has been one of the centers of attention among the researchers in the field of applied operations research. In this paper, a revised version of Ant Colony Optimization (ACO) technique is presented to solve this problem. This paper is a sequel to the previous ACO algorithm presented by the authors. In this algorithm, according to some probabilistic rules, artificial ants will select cutting patterns and generate a feasible solution. Computational results show the high efficiency and accuracy of the proposed algorithm for solving one- dimensional cutting stock problem

Control of Car-Like Multi Robots for Following and Hunting of Moving Target

, M.Sc. Thesis Sharif University of Technology Kouhi Gilvan, Hamed (Author) ; Sayyaadi, Hassan (Supervisor) ; Salarieh, Hassan (Co-Advisor)

Abstract

The main purpose of the present thesis is to establish a decentralized controller for some car–like multi robots to follow and hunt moving targets. Robots are very similar to actual cars considering geometric dimensions, mass and moment of inertia and so on; and outputs of the controller are steering-wheel and driving-wheel torques appropriately. Dynamics of the moving target is so that it escapes from the robots. Robots are equipped with antenna for getting wireless sensory signals, including range and bearing sensors. Kalman filter is used for estimation the target relative position and speed and robots state variables. The controller is designed for doing the above mentioned group...

Stock Price Forecasting Using Neural Networks and Fuzzy Logic

, M.Sc. Thesis Sharif University of Technology Alizadeh, Parisa (Author) ; Shavandi, Hassan (Supervisor)

Abstract

This research proposes a novel hybrid method for stock price index forecasting relying on technical analysis, the fundamental analysis of capital market, neural networks technology, and fuzzy logic. The new method shows a good performance comparing complicated and time-consuming forecasting methods. Several factors influence stock price; for example, an important one is the previous trend of stock price. Fortunately, by developing technical analysis and introducing the various indices of this method the maximum use of historical data is made in order to forecast future prices. Another kind of factors is macro-economic variables that their influence on the long-term trends of the stock...

Control of a Group of Mobile Manipulators for Cooperative object Transportation

, M.Sc. Thesis Sharif University of Technology Babaee, Mohammad (Author) ; Sayyadi, Hassan (Supervisor)

Abstract

In this thesis control of wheeled mobile manipulators for cooperative object transportation is investigated. Full dynamic model of a mobile manipulator with a three wheeled mobile base and a three DOF manipulator is derived using Gibbs-Appell method. Input-output linearization technique is used to control individual robots. Transporting the object is divided into two steps, first robots use a decentralized behavior-based method to approach and surround the object. Then virtual structure method is used to control the robots to transport the object cooperatively. Simulation results with three robots handling an object are presented to show the effectiveness of proposed method

Dynamic and Control of Tethered Satellite Systems

, M.Sc. Thesis Sharif University of Technology Yousefian, Peyman (Author) ; Salarieh, Hassan (Supervisor)

Abstract

In this work dynamic behavior of a two body TSS with main satellite as rigid body is studied and effects of tether elasticity and tension on the satellite dynamic are indicated in station keeping phase and circular orbit. Also a simplified modeling is introduced which could be used in nonlinear controller design. Lagrange and extended Lagrange method is used to derive equations of motion. It is shown that longitudinal vibration of tether has small effect on satellite attitude and angular velocity and because of high frequency it can be decoupled from satellite dynamic. In the simplified model, orbital motion is decoupled from equations of TSS and main satellite dynamic. Effect of decoupling...

Analysis of Control of Nonlinear Switched Systems

, M.Sc. Thesis Sharif University of Technology Toorani, Amin (Author) ; Zohoor, Hassan (Supervisor)

Abstract

Separate analysis of modern systems by continuous or discrete theories is not possible, because they cannot solely express the detailed descriptions of a system. As a result of this, researchers are motivated to study hybrid systems. Specific class of hybrid systems which consists of several continuous subsystems and a rule that specifies how to switch between them, is called a switched system. Recently, many studies have been done on the stability and control of switched systems. In this regard, the goal of present study is presenting applications of switched systems using two control methods. The first application is control of a chemical reactor system with multiple modes. We presented...

Design and Analysis of a Cable Based Robot Similar to a Human Hand

, M.Sc. Thesis Sharif University of Technology Abyaneh, Soroush (Author) ; Zohoor, Hassan (Supervisor)

Abstract

The application of manipulators is becoming more and more popular in objects handling especially when it is desired to have access to remote areas in destructive or hazardous taskspaces. For this purpose, a hand-like mechanism must be designed to be used as an end-effector, which can grasp objects. In this paper a cable driven grasping mechanism has been presented. In the proposed mechanism each finger consists of three phalanxes which are actuated by a single motor. Also, locking and unlocking constraints are used in the mechanism in order to generate an anthropomorphic motion, in which, the order of reaching phalanxes to the object is sequential, in such a way that each phalanx starts...

Data Integration with Multiple Ontologies in Semantic Sensor Web

, M.Sc. Thesis Sharif University of Technology Sadeghi, Shahrouz (Author) ; Abolhassani, Hassan (Supervisor)

Abstract

Sensor Observation Service (SOS) which is defined by Open Geospatial Consortium (OGC) Sensor Web Enablement group is a Web service specification in order to standardize the way sensors and sensor data are discovered and accessed on the Sensor Web. Multiple instances of this service can be implemented around the world, providing huge amount of data every moment. Each of these services operates in specific domain of knowledge (thematic), spatial and temporal dimensions. One way to reveal the underlying data over all of them is to provide an architecture for data integration to allow the user to query sensor data without the knowledge of the infrastructure components. In this research, a novel...

Crack Detection on Rotary Elements Using Vibration Analysis

, M.Sc. Thesis Sharif University of Technology Ari, Mostafa (Author) ; Sayyaddi, Hassan (Supervisor)

Abstract

Rotating machinery are found in most industrial units, that are highly susceptible to transverse cross sectional cracks due to fatigue. The vibration pattern of a rotor system reflects the mechanical parameter changes in the system. These vibrations can be used for identifying the cracks and appropriate actions can be taken to prevent more damage to the system. The dynamic behavior of cracked rotor is a subject of considerable current interest. Several researchers have developed models of cracked rotor systems. Therefore, In this thesis, the influence of the presence of transverse cracks in a simple Jeffcott rotor is analyzed. In first, on the basis of fracture mechanics, the direct and...

Positioning, Tracking and Shape Control in Micro-Beams Via Electrostatic Actuators and Incomplete State Feedback

, M.Sc. Thesis Sharif University of Technology Karami, Farzad (Author) ; Salarieh, Hassan (Supervisor)

Abstract

Systems that are electrostatically actuated have found a vast role in MEMS application. This technology is used in optical systems, sensors, micro switches, and deformable mirrors. Raising the use of these systems in fields that needs better performance highlighted the need to accurate study of dynamics and control of electrostatic actuated systems in micro scale. This work is dedicated to design of an estimation and control system for a micro-beam that is actuated by electrostatic. After a comprehensive survey on pervious works that are done on dynamic, applications, fabrication and control of these systems dynamic of the system is fully derived. The environmental factors like fringing...

Study of Dynamic Behavior and Characteristics of shaking Table Using Analytical and Experimental Models

, M.Sc. Thesis Sharif University of Technology Farzanian, Khashayar (Author) ; Moghaddam, Hassan (Supervisor)

Abstract

It is more than a century to study qualitative and quantitative behavior of structures against earthquakes will be benefited from laboratory studies. In fact, the best method for observing the behavior of a structure during an earthquake is earthquake simulation on the structure. Today, the most effective way to do these tests is simulating of earthquake by using of Shaking Table. The shaking table consists of three main parts: electronic, hydraulic and mechanical. The accuracy of earthquake simulation’s results are very important. In recent years, numerous studies on the dynamic behavior of the above components and the interactions between these components are performed. In this study, we...

Surveying Philosophical Arguments on "Origination of The Universe" based on the views of: W.L.Craig, Q.Smith and Allamah S.M.H Al-Tabatabaie

, M.Sc. Thesis Sharif University of Technology Zare, Roozbeh (Author) ; Hosseini, Hassan (Supervisor)

Abstract

The problem of Origination of The Universe is one of the most important issues in the history of philosophy whether in western edition or in Islamic thought. The most problematic aspect of the Origination is Temporal Origination. From about 30 years ago as a result of the works of a famous American philosopher William Lane Craig, the debate between temporality and Eternity of the Universe became a fresh topic in western philosophy. In this research we want to survey the philosophical arguments for and against the temporality of the Universe based on the views of: W.L.Craig, Q.Smith and Allamah S.M.H Al-Tabatabaie.

Strengthening of Liquid Storage Tanks by Frictional Damper

, M.Sc. Thesis Sharif University of Technology Kaboodanian, Hamid (Author) ; Moghaddam, Hassan (Supervisor)

Abstract

Considering the role of fluid storage tanks within or after an earthquake and the irreparable damages from their destruction that arise from the nature of the fluids of flammable or toxic nature stored in those tanks, it is very important to ensure stability and durability of the tanks when an earthquake is occurring. One of the most important damages to storage tanks within the past earthquakes has been lack of stability of their walls taking place in the form of elephant buckling. A certain storage tank was subject to a case study in this research and the tank's body, foundation, anchorages, the tread between the fluid and tank's body and between the bottom sheet and foundation were...