Sharif Digital Repository

Today, structural Health monitoring is a major concern in the engineering community. Multisite fatigue damage, hidden cracks and corrosion in hard-to-reach locations are among the major flaws encountered in today's extensive diagnosis and/or prognosis of aircraft structures. Ultrasonic waves, lamb waves are particularly advantageous because of their propagation at large distances with little damp in thin-wall structures. In this paper a new rectangular shape array of embedded piezoelectric sensors is developed to detect some damages in large planar structures. An artificial neural network is trained to identify the damage state and its location. Output signals of each sensor due to various... 

Because damage identification results based on the Lamb waves propagation approach can be influenced by varying environmental and operational conditions, development of a robust monitoring system with no need of the prior measured data of the structure has gained much attention recently. The instantaneous baseline damage detection technique is one of the promising methods that overcome the mentioned obstacles. For this, the material properties, electromechanical characteristics, and the geometric features must be identical. Also, sensor distances in similar paths and the geometric dimensions of the transducers must be the same. So, implementing the instantaneous baseline damage... 

In recent years, new Structural Health Monitoring (SHM) methodologies with a concept of "instantaneous baseline damage detection" are being developed by many researchers. In this context, this paper uses a new method to identify multiple damage in the aluminum plate. For this goal use from spars PZWS sensor network to generate and received guided waves. Ultrasonic waves are generated and measured from all possible different pairs of excitation and sensing transducers. For feature extraction of received signals used from continues wavelet transform. A probabilistic damage diagnostic algorithm based on correlation analysis was investigated to locate single or multiple damages. In this study,... 

Structural health monitoring (SHM) has been adopted in the aircraft and civil industries over the last two decades. The ultrasonic guided wave propagation technique is a promising damage detection approach in airplane thin wall structures because of their long distance traveling ability and low attenuation. In fact, by efficiently designing the pattern of sensors one can effectively pick up the changes that happen in propagated signals due to presence of any kind of structural damage. This detection approach could be effectively assisted by numerical simulation techniques like finite-element modeling. To obtain a damage detection algorithm based on instantaneous baseline data, the... 

Considering the space of constant-weight sequences as the reference set for every optical orthogonal code (OOC) design algorithm, we propose a classification method that preserves the correlation properties of sequences. First, we introduce the circulant matrix representation of optical orthogonal codes and, based on the spectrum of circulant matrices, we define the spectral classification of the set Sn,w of all (0, 1)-sequences with length n, weight w, and the first chip 1. Then, as a method for spectrally classifying the set Sn,w, we discuss an algebraic structure called multiplicative group action. Using the above multiplicative group action, we define an equivalence relation on Sn,w in... 

In this paper we investigate the Shannon capacity of single and parallel Poisson channels in different scenarios. At first, by examining the capacity equation of the single Poisson channel, the minimum average power that maximizes the capacity is found. Then, applying the method of Lagrange multipliers on the capacity expression of the parallel Poisson channel, we obtain the optimum power allocation maximizing the parallel Poisson channel capacity  

Achieving high densification parameter is an essential factor for metal-based composites to represent excellent mechanical characteristics. Among various compaction methods, double-pressing double-sintering (DPDS) has gained the attraction of researchers to fabricate metal-matrix composites (MMCs) as an efficient technique over the last decade. In this process, the powder will be pre-pressed and then pre-sintered; it helps reduce work hardening and prepare the sample for better densification in the next pressing and sintering step. By employing the above-mentioned method, carbon nanotube (CNT) reinforced aluminum nanocomposites; ZrB2 reinforced copper nanocomposites; and CNT reinforced... 

Electrochemical sensing performance of two-dimensional hexagonal boron nitride (2D h-BN) has traditionally been suppressed by their intrinsic electrical insulation and deficient electron transportation mechanism. However, the excellent electrocatalytic activity, high specific surface area, N- and B-active edges, structural defects, adjustable band gap through interaction with other nanomaterials, and chemical functionalization, makes 2D h-BN ideal for many sensing applications. Therefore, finding a pathway to modulate the electronic properties of 2D h-BN while the intrinsic characteristics are well preserved, will evolve a new generation of highly sensitive and selective electrochemical... 

Two-dimensional transition metal dichalcogenides (TMDs) offer fascinating opportunities for fundamental nanoscale science and various technological applications. They are a promising platform for next generation optoelectronics and energy harvesting devices due to their exceptional characteristics at the nanoscale, such as tunable bandgap and strong light-matter interactions. The performance of TMD-based devices is mainly governed by the structure, composition, size, defects, and the state of their interfaces. Many properties of TMDs are influenced by the method of synthesis so numerous studies have focused on processing high-quality TMDs with controlled physicochemical properties.... 

Cell survival during the early stages of transplantation and before new blood vessels formation is a major challenge in translational applications of 3D bioprinted tissues. Supplementing oxygen (O2) to transplanted cells via an O2 generating source such as calcium peroxide (CPO) is an attractive approach to ensure cell viability. Calcium peroxide also produces calcium hydroxide that reduces the viscosity of bioinks, which is a limiting factor for bioprinting. Therefore, adapting this solution into 3D bioprinting is of significant importance. In this study, a gelatin methacryloyl (GelMA) bioink that is optimized in terms of pH and viscosity is developed. The improved rheological properties... 

Microchannels in hydrogels play an essential role in enabling a smart contact lens. However, microchannels have rarely been created in commercial hydrogel contact lenses due to their sensitivity to conventional microfabrication techniques. Here, we report the fabrication of microchannels in poly(2-hydroxyethyl methacrylate) (poly(HEMA)) hydrogels that are used in commercial contact lenses with a three-dimensional (3D) printed mold. We investigated the corresponding capillary flow behaviors in these microchannels. We observed different capillary flow regimes in these microchannels, depending on their hydration level. In particular, we found that a peristaltic pressure could reinstate flow in... 

Background: Combating viral hepatitis is part of the UN Sustainable Development Goals (SDGs), and WHO has put forth hepatitis B elimination targets in its Global Health Sector Strategy on Viral Hepatitis (WHO-GHSS) and Interim Guidance for Country Validation of Viral Hepatitis Elimination (WHO Interim Guidance). We estimated the global, regional, and national prevalence of hepatitis B virus (HBV), as well as mortality and disability-adjusted life-years (DALYs) due to HBV, as part of the Global Burden of Diseases, Injuries, and Risk Factors Study (GBD) 2019. This included estimates for 194 WHO member states, for which we compared our estimates to WHO elimination targets. Methods: The primary...