Sharif Digital Repository

Parkinson's is a disease caused by a disorder in the central nervous system of the body. There is no definite cure for this disease, but one of the ways to prevent the progress of this disease is to use movement therapy. One of the goals of designing wearable systems consisting of inertial sensors is to make it possible to perform this movement therapy from a distance. The purpose of the present study and research is to use the approach of simple and complex activities in order to increase the accuracy in the detection of activities and also to solve the problems of the previous system, with the help of creating the ability to detect complex meaningful activities for Parkinson's patients. In... 

In the recent decades, Polymer Electrolyte Membrane Fuel Cells (PEFC) have been known as an appropriate type of fuel cells, due to being electrochemical converter and clean energy generator with high power density and having low operation temperature and launch time. Palatine is one of the major materials that are used in electro-catalysts of fuel cell. Due to shortage of palatine resources and its high price, fuel cell production is not economical. To achieve economic conditions for production of fuel cell, two major methods are proposed:
1) Reduction of the employed amount of palatine in electro-catalyst
2) Full replacement of palatine with cheap materials
In the current... 

In this work a new innovative microfluidic system for the selection of motile sperms was developed. The novel aspect of this work is based on the fact the motile sperms follow microchannel walls. Immotile sperms are not able to follow curved paths and therefore their movement toward the outlet gets hindered and most of them could not reach to the outlet. But motile sperms, moving alongside the microchannel walls, reach to the outlet and get separated from the immotile ones. After designing, 3 microfluidic chips having curved microchannels with curvature radius of 150, 300 and 600 micrometer and one with a straight microchannel were fabricated using photolithography and soft lithography.... 

In recent years, the reductive dehalogenation of the chlorinated hydrocarbons using nanoscale zerovalent iron (nZVI) represents a promising approach for underground remediation. Regarding commercialization of this technique, instability and unknown nature of nZVI particle are still challenging tasks that should be considered.
In the current work, Nanoscale zero-valent iron (nZVI) and palladized iron (Pd/Fe) bimetallic particles were synthesized and employed to react with chlorinated compound (PCE) in water to investigate its degradation behaviors. The results show that the reactant ratio, stabilizer amount and temperature are the main parameters with the considerable effect on PCE... 

The oxidation-reduction (redox) responsive micelle system is based on a diselenide-containing triblock copolymer, poly(ε-caprolactone)-bis(diselenide-methoxy poly(ethylene glycol)/poly(ethylene glycol)-folate) [PCL-(SeSe-mPEG/PEG-FA)2]. Resulting in the development of tumor-targeted delivery for hydrophobic anticancer drugs. The diselenide bond, as redox-sensitive linkage, was designed, so it is located at the hydrophilic/hydrophobic hinge to allow complete micelles collapse and efficient drug release, in redox environments. The amphiphilic block copolymers self-assembled into micelles at concentrations above the critical micelle concentration (CMC) in an aqueous environment. Dynamic light... 

In this thesis, we give necessary and sufficient conditions for a simplicial com- plex with small codimension to satisfy the Serre’s condition (Sr) as well as the CMt property. We also give a connection between being (Sr) and being CMt. Also, we focus on the dimension of dual modules of local cohomology of Stanley– Reisner rings to obtain a new vector which contains important information on the Serre’s condition (Sr) and the CMt property as well as the depth of Stanley–Reisner rings. We prove some results in this regard including lower bounds for the depth of Stanley–Reisner rings. Further, we give a characterization of (d − 1)-dimensional simplicial complexes with codimension two which are... 

The main goal of this thesis is the design and development of a rehabilitation device for helping patients “to improve blood circulation” & retain and recover their abilities if possible that were lost during the stroke or a accident like that (my research in karaj/iran shows that it is possible by just movement of the specific body part). The focus is on hand in this thesis because Injuries to the hand are common and can be very debilitating since our hands are our primary means for interacting with our world. For rehabilitation in case of human hand there are several practices that should be done for patients either in home or in a rehabilitation center, time and money that is supposed to... 

In the past few decades, shaking tables are widely used to evaluate system response of structures under seismic excitations. These devices are used without any fundamental research performed on a shaking table system as an entity model. In most of these studies for simplicity, it is assumed that there exist no considerable vibration and displacement around the shaking tables, and no attention is paid to the peripheral substances such as soil settled under the foundation.
In this thesis, result of ambient vibration test on shaking table system (solid deck, concrete foundation and soil layer) has been presented. Precise sensors known as low frequency and high accuracy accelerometers have... 

Out of several ground improvement techniques available, stone columns have been widely used. This technique has been successfully applied to increase the bearing capacity and to reduce the settlement for foundation of structures like liquid storage tanks, earthen embankments, raft foundations, etc., where a relatively large settlement is permissible. This technique has, generally, been proven successful in increasing the stiffness of weak soils, upgrading their safe bearing capacity, and reducing their total and differential settlements, as well as speeding up their consolidation process. The beneficial effects of stone column installation in weak deposits is manifested in the form of... 

Laminar forced convection flow through a channel partially filled with a porous material was numerically studied in this thesis. The Navier-Stokes and Brinkman-Forchheimer equations were used to model the fluid flow in the free and porous regions, respectively. Coupling of the pressure and velocity fields was resolved using the SIMPLEC algorithm. The local thermal equilibrium was adopted in the energy equation. The effects of the thermal conductivity ratio, Darcy number, porosity, Reynolds number and height of the porous insert on velocity and temperature field were investigated. The results show that the flow behavior and its associated heat transfer are susceptible to the variation of the... 

In the present study, a new version of haptic devices is presented in which user’s hand is in contact with the device just while collision with virtual surface. In this system, the position of user’s finger can be traced by using a camera and the haptic device follows user’s finger at the distance of about two centimeters. While the haptic device approaches to the virtual surface, gradually reduces its speed and stops about two centimeters distant of virtual plane. Then user’s hand collides with the haptic device which is static. Greater fidelity, transparency, more stability and also no need to large actuators are of the advantages of this system. In this project, first we present a new... 

In this thesis we try to find optimized parameters for imaging and manipulation of a biosample with AFM. For this we have prepared a numerous Molecular Dynamics simulation and find some reliable result. So, first we have focused on imaging process in Non contact mode (the less harmful mode). Then we headed into the manipulation process. The main problem about manipulating a biosample is the environment. In imaging section, the process of imaging a biomolecule by AFM is modeled using molecular dynamics simulations. Since the large normal force exerted by the tip on the biosample in contact and tapping modes may damage the sample structure and produce irreversible deformation, the non-contact... 

Results of previous studies on silt and clay indicated that variations in the small strain shear modulus, Gmax, during drying had a non-linear increasing trend with matric suction with greater values upon wetting. However, due to different material properties and inter-particle forces, different behaviour in Gmax is expected for sand. Although considerable research has been devoted in recent years to characterize the behaviour of Gmax of sand during drying, rather less attention has been paid to the effect of hydraulic hysteresis on Gmax and its variations during wetting. In the study presented herein, an effort was made to characterize the variation of Gmax for specimens of sand during... 

Abstract The problem of competetive facility location can be defined as follows: There are a number of customers in the form of points in space, and two players arrange a number of facilities in the form of points in space, given some limitations, respectively. Each customer’s connection to each facility has a cost for the customer and an advantage for the facility, and each customer wants to be connected to at most one of the facilities which has the lowest cost for him. The goal is to find the strategy of placing the facilities and determining the cost which the facility receives from the customer, in such a way that the player’s profit is maximised.In this thesis, we first sought to... 

Zero knowledge proofs allow a person (prover) to convince another person (verifier) that he has performed a specific computation on a secret data correctly, and has obtained a true answer, without having to disclose the secret data. QAP (Quadratic Arithmetic Program) based zkSNARKs (zero knowledge Succinct Non-interactive Argument of Knowledge) are a type of zero knowledge proof. They have several properties that make them attractive in practice, e.g. verifier's work is very easy. So they are used in many areas such as Blockchain and cloud computing. But yet prover's work in QAP based zkSNARKs is heavy, therefore, it may not be possible for a prover with limited processing resource to run...