Sharif Digital Repository

Corrosion of lead silicate glass (LSG) contacting 0.5 M aqueous nitric acid (HNO 3) was investigated via scanning electron microscopy, energy-dispersive spectroscopy, inductively coupled plasma analysis, and weight-loss measurement to determine the respective contributions of the ion-exchange vs. the hydrolysis reactions. The LSG having X M ≡ Pb+K+Na/Si mole ratios of less than 0.7 showed very little weight loss with no Si network deterioration. At X M > 0.7, the mechanism changed into the hydrolysis, which caused the formation of a networkless gel layer resting at the solid/liquid interface. Addition of titania (TiO 2) and zirconia (ZrO 2) had disparate effects: X M < 0.7 improved corrosion... 

Low Grade Heat Driven Multi-effect Distillation and Desalination describes the development of advanced multi-effect evaporation technologies that are driven by low grade sensible heat, including process waste heat in refineries, heat rejection from diesel generators or microturbines, and solar and geothermal energy. The technologies discussed can be applied to desalination in remote areas, purifying produced water in oil-and-gas industries, and to re-concentrate process liquor in refineries.
This book is ideal for researchers, engineering scientists, graduate students, and industrial practitioners working in the desalination, petrochemical, and mineral refining sectors, helping them... 

Presence of bubbles affects quality of the lead silicate glass (LSG) samples. This paper presents the most recent results obtained on formation and collapse of bubbles in LSG melts. Main sources of the bubbles are dissolved gases and redox reactions. A foamy layer full of bubbles rapidly forms at top of the molten phase. Effect of viscosity and density of the melt on content and ascension rate of the bubbles are investigated. Number and mean diameter of the bubbles and thickness of the top bubbly layer are calculated from gas volume measurements and image analysis via J software  

Tailoring band gap energies and band alignment types of heterogeneous photocatalysts is critical for their performance in particular applications. Here, by performing calculations in the framework of density functional theory, we study the role of interface in control and tuning band gap and band alignment characteristics of two-dimensional van der Waals (vdW) heterostructures of monolayers of triazine graphitic carbon nitride (tg-C3N4) and Janus tungsten sulfide selenide (WSSe) by varying either S or Se atomic layers. Then we investigate how the vdW heterostructures (i.e., tg-C3N4/SWSe and tg-C3N4/SeWS) over both tg-C3N4 and WSSe surface sides can serve as an efficient water-splitting... 

The formation of atomic nanoclusters on suspended graphene sheets has been investigated by employing a molecular dynamics simulation at finite temperature. Our systematic study is based on temperature-dependent molecular dynamics simulations of some transition and alkali atoms on suspended graphene sheets. We find that the transition atoms aggregate and make various size nanoclusters distributed randomly on graphene surfaces. We also report that most alkali atoms make one atomic layer on graphene sheets. Interestingly, the potassium atoms almost deposit regularly on the surface at low temperature. We expect from this behavior that the electrical conductivity of a suspended graphene doped by... 

It is well known that the ballistic deposition and the restricted solid-on-solid models belong to the same universality class, having the same roughness and growth exponents. In this paper, we determine some new statistical properties of the two models, such as the Kramers-Moyal coefficients and the Markov length scale, and show them to be distinct for the two models. © 2008 IOP Publishing Ltd  

We study the conductance of disordered graphene superlattices with short-range structural correlations. The system consists of electron- and hole-doped graphenes of various thicknesses, which fluctuate randomly around their mean value. The effect of the randomness on the probability of transmission through the system of various sizes is studied. We show that in a disordered superlattice the quasiparticle that approaches the barrier interface almost perpendicularly transmits through the system. The conductivity of the finite-size system is computed and shown that the conductance vanishes when the sample size becomes very large, whereas for some specific structures the conductance tends to a... 

In this paper optimization of energy consumption in an electric vehicle is presented. The main idea of this optimization is based on selecting the best gear level in driving the vehicle. Two algorithms for optimization are introduced which are based on fuzzy rules and fuzzy controllers. In first algorithm, fuzzy controller simulates energy consumption in different gear levels, and chooses the optimum gear level. While in second method, fuzzy controller detects the optimum gear level by measuring the vehicle's average speed and acceleration. To investigate the performance of these controllers, a model of TOSAN vehicle is developed and the controllers outputs are checked in simulation of TOSAN... 

Node localization is of paramount importance to different wireless sensor network (WSN) applications. This paper investigates the received signal strength (RSS) based localization problem with unknown path-loss model parameters. Most works in RSS localization assume the transmit power and path-loss exponent (PLE) are known that is not a realistic assumption in some cases. However this paper, assumes the transmit power and the PLE are both unknown and a novel algorithm for sensor location is proposed. The algorithm is based on the generalized total least-squares (GTLS) method and gives an explicit solution for the localization problem. The performance of the proposed method is compared with... 

Measurement of partial discharges (PDs) current pulses is found to be one of the most efficient methods to evaluate the high voltage electrical equipment insulation condition. Generators, transformers, cables and transmission lines are especially tested for the presence of PDs. In AC, the solution is well known. Phase-resolved method can be used to detect and determine partial discharge activities. Although phase-resolved method works well under AC voltage; due to lack of a cyclic variation in DC voltage and current this cannot be used when studying partial discharges in DC voltage systems. Therefore, other methods are employed to interpret the partial discharge in DC. For this purpose, the... 

Over the last two decades there have been numerous reports from different seismically active regions of the world that thermal infrared (TIR) anomalies can be identified around the epicentral areas before major earthquakes [e.g. (Tronin et al., 2002)]. The TIR anomalies reportedly appear as early as 14 to 7 days before the seismic events and affect areas as large as 1000s to 100,000s km2 in size. Our case study for detection of TIRs using NOAA-AVHRR data(Band 4) is an Ms = 5.1 earthquake that occurred on 14th October 2004 near Ravar in Kerman province located in Loot and Tabas deserts, southeast-central Iran. The area is part of the Golbaf-Sirj seismogenic zone. It includes major faults... 

In this paper, we investigate the statistical and scaling properties of the California earthquakes' inter-events over a period of the recent 40 years. To detect long-term correlations behavior, we apply detrended fluctuation analysis (DFA), which can systematically detect and overcome nonstationarities in the data set at all time scales. We calculate for various earthquakes with magnitudes larger than a given M. The results indicate that the Hurst exponent decreases with increasing M; characterized by a Hurst exponent, which is given by, H = 0:34 + 1:53/M, indicating that for events with very large magnitudes M, the Hurst exponent decreases to 0:50, which is for independent events. © Versita...