Sharif Digital Repository

Since 1906, after the earthquake of Messina in Italy, Italian engineers start developing a new method for increasing the resistance of a structure during an earthquake. With the limitation of time and technology, this method was acceptable for the time period. By developing the accelerographs and seismographs and the methods to process big data, new methods are developed and are being used in designing structures; new technologies allow engineers to analyze the performance of structures with ease. The studies in this research indicates that achieving the safety indices in any design require utilizing all dynamic properties of a structure such as period, stiffness and damping. In this... 

Many regulations around the world use the Newmark method, directly or indirectly, in the design spectrum. Research on the Newmark design spectrum shows that this spectrum sometimes significantly differs from the earthquakes response spectra that have occurred; therefore, it is necessary to develop and introduce new design spectra by modifying the Newmark method to be more compatible with reality. The developed design spectra in seismic regulations around the world are directly affected by the records involved in their development. Thus, the appropriate design spectrum should be prepared based on the seismic characteristics of the faults of each country. Evaluation of the Iranian Seismic... 

One of the key issues in the operations of on orbit servicing to unmanned satellites is to provide a safe and reliable docking process. In this thesis, the dynamic behavior of a flexible probe in the central docking mechanism of unmanned satellites is investigated. For this purpose, first a dynamic analysis software has been applied to build a three dimensional model with the assumption of flexible clamped beam as a shock absorber, finally, the impact phenomone is simulated. therefore, in addition to solving a three-dimensional problem and studying the impact phenomenon between chaser and target satellite, it is possible to consider the parameters such as the type of connection between the... 

The present study looks into the fracture of perforated steel plates and their sensitivity in ductile fracture. It also examines the effects of strain rise phenomenon in these specimens. The main employed fracture model is VGM, which was first introduced by Rice and Tracey, and later enhanced by Kanvinde et al.. The general methodology includes finite element simulation and lab experiments on perforated plates, to determine ductility, strain concentration in hole periphery and model sensitivity. Fot thid purpose 86 steel sheet specimen with different holes and cuts were manufactured and tested. With the acquired data, the impact of strain concentration on the load carrying capabilities and... 

In this research, the thermohydraulic parameters of the reactor of Bushehr power plant have been compared between the activation or not of the emergency gas extraction (YR) system by the operator during the LB-LOCA accident, without access to the active part of the ECCS. Bushehr nuclear power plant reactor is of VVER-1000 type and has a primary and secondary circuit, which is completely modeled in this research. After the complete review and understanding of the primary circuit and its systems, the information required for modeling has been collected from the existing documents of the power plant, and after that, the modeling and sizing of the heart components and the four main rings and the... 

High-quality online services demand reliable and fast packet delivery at the network layer. However, clear evidence documents the existence of compromised routers in the ISP and enterprise networks, threatening network availability and reliability. A compromised router can stealthily drop, modify, inject, or delay packets in the forwarding path to launch Denial-of-Service, surveillance, man-in-the-middle attacks, etc. So researches tried to create intrusion detection methods to identify adversarial routers and switches. To this end, data-plane fault localization (FL) aims to identify faulty links and is an effective means of achieving high network availability. FL protocols use... 

Confining nematic liquid crystal between two curved boundary conditions while the nematic molecules have a degenerate planar anchoring leads to complex and beautiful textures of molecular disparagement(defect) in the bulk and on the surfaces. Such the liquid crystal shells are made with double-emulsion techniques in microfluidic devices have provided applications for micro-scale colloidal linkers.In this work, we have numerically minimized the elastic energy in one-constant approximation in present of Fournier’s degenerate surface potential with finite element method. The nematic shell is confined between two spherical surfaces that we have studied the final energies and their related... 

A liquid crystal is a state of matter composed of highly anisotropic building blocks. When liquid crystals are exposed to surfaces with given shapes and anchoring conditions, the orientation of their molecules gets spatially disordered and topological defects may form in the system. The interplay between liquid crystals and the geometry and topology of the colloidal particles has motivated extensive recent studies.In this thesis, we present the numerical modeling results for two faceted colloidal particles in a thermotropic nematic liquid crystal. To obtain the equilibrium nematic field with a finiteelement method, we numerically minimize the free energy of the system that based on the... 

Providing high bandwidth network infrastructures for ever increasing need of data transport is of great importance. The underling infrastructure for many communication services such as GSM/3G/4G mobile networks and Internet services is Synchronous Digital Hierarchy (SDH) optical transport systems. SDH are standardized protocols that multiplex multiple lower rate digital bit streams, such as E1 and Ethernet, and transfer them synchronously over optical fiber using lasers or LEDs. In addition to high data transfer rates, flexible network management and protection mechanisms have great importance, hence are part of SDH standards. In order to obtain flexible network architecture and protected... 

Development of Smart Grid and deployment of smart meters in large scale has raised a lot of concerns regarding customers’ privacy. Consequently, several schemes have been proposed to overcome the above mentioned issue. These schemes mainly rely on data aggregation as a method of protecting users’ privacy from the grid operators. However, the main problem with most of these schemes is the fact that they require a large amount of processing power at the meter side. This, together with the fact that smart meters don’t usually have a powerful processor, can cause the unavailability of smart meter data at the required time for operators of the grid, and at the same time disables smart meters from... 

Secure routing is a major key to service maintenance in wireless ad hoc networks. Ad hoc nature exposes the network to several types of node misbehavior or attacks. Wormhole attack is one of the most severe active attacks to mobile ad hoc networks. Noting the resource limitations in such networks, nodes may have a tendency to behave selfishly. Selfish behavior can have drastic impacts on network performance. We have proposed a Misbehavior-Tolerant Multipath Routing protocol (MTMR) which detects and punishes all types of misbehavior such as selfish behavior, wormhole, sinkhole and grey-hole attacks. The protocol utilizes a proactive approach to enforce cooperation. In addition, it uses a... 

Steel structure with saddle connections constitutes a portion of the old steel structures in Iran. During past strong ground motions such as Manjil and Bam earthquakes, these structures were vulnerable and experienced significant damages. These structures were widely used due to their easy installation. However, according to their unpromising behavior, they need an appropriate lateral force-resisting system. A concrete shear wall is one of the suitable lateral force resisting systems that can improve the behavior of steel frames with saddle connections. To find the coefficients of seismic performance factors including response modification factor, overstrength factor, and deflection... 

In this study, the behavior of cantilevered HSS beams under cyclic bending loading are modeled in order to study the buckling and post buckling behavior have been investigated by Finite Element method.The analytical results are fairly in good agreement with the experimental results. The analysis demonstrates that when local buckling occurs in near of connection area, subsequently, the strain grows severely that is entitled as strain rise and then, is caused fracture. As a result, local buckling limits the ability of these members to form stable plastic hinges and the behavior is highly dependent on the width-thickness (b/t) and the depth-thickness ratio (h/t).Also, the thesis has been tried... 

Dynamic spectrum access with the aid of cognitive radio (CR) technology is a viable solution to spectrum scarcity. There are many military and emergency applications that require the use of cognitive radio ad-hoc networks (CRAHNs). In these net- works, nodes must first find each other in a wide spectrum and then exchange their desired data. The process of finding each other in a multichannel environment is a challenging task and is usually known as rendezvous. Since rendezvous is the first step in communication, disrupting will disable the nodes from establishing proper communication sessions. That results in a drastic degrade in the performance of the network. Therefore, it is important to... 

Spray-wall impingement is one of the phenomenon that associated in different subject such as spray cooling, combustion chamber and gas turbine. With the impingement of spray to the wall, liquid film begins to form. Wall film characteristics is still an important subject to study. Due to the various stages of liquid film formation from injection of spray till spray-wall impingement, the investigation of this phenomenon is far more complicated. This paper is meant to provide detailed data on spray-wall impingement and wall film formation physics with the help of computational analysis of OpenFOAM . A Lagrangian-Eulerian method based on discrete phase model (DPM) was employed to model... 

Light propagation through turbid media, such as biological tissues, experience scattering due to inhomogeneous distribution of refractive indices of their microscopic structure. Scattering and diffusion of light not only limit many optical imaging techniques, but are also big challenges for telecommunication, spectroscopy, and other optical techniques. Recently many new imaging methods are developed that work in strongly scattering media such as optical coherence tomography, diffusion tomography, and laser speckle velocimetry. In this thesis, we have studied how wavefront shaping techniques can tackle the problem of scattering. By spatially shaping the wavefront of the incident beam, using...