Sharif Digital Repository

One of the key issues in the operations of on orbit servicing to unmanned satellites is to provide a safe and reliable docking process. In this thesis, the dynamic behavior of a flexible probe in the central docking mechanism of unmanned satellites is investigated. For this purpose, first a dynamic analysis software has been applied to build a three dimensional model with the assumption of flexible clamped beam as a shock absorber, finally, the impact phenomone is simulated. therefore, in addition to solving a three-dimensional problem and studying the impact phenomenon between chaser and target satellite, it is possible to consider the parameters such as the type of connection between the... 

In this research, the thermohydraulic parameters of the reactor of Bushehr power plant have been compared between the activation or not of the emergency gas extraction (YR) system by the operator during the LB-LOCA accident, without access to the active part of the ECCS. Bushehr nuclear power plant reactor is of VVER-1000 type and has a primary and secondary circuit, which is completely modeled in this research. After the complete review and understanding of the primary circuit and its systems, the information required for modeling has been collected from the existing documents of the power plant, and after that, the modeling and sizing of the heart components and the four main rings and the... 

Steel structure with saddle connections constitutes a portion of the old steel structures in Iran. During past strong ground motions such as Manjil and Bam earthquakes, these structures were vulnerable and experienced significant damages. These structures were widely used due to their easy installation. However, according to their unpromising behavior, they need an appropriate lateral force-resisting system. A concrete shear wall is one of the suitable lateral force resisting systems that can improve the behavior of steel frames with saddle connections. To find the coefficients of seismic performance factors including response modification factor, overstrength factor, and deflection... 

In this study, the behavior of cantilevered HSS beams under cyclic bending loading are modeled in order to study the buckling and post buckling behavior have been investigated by Finite Element method.The analytical results are fairly in good agreement with the experimental results. The analysis demonstrates that when local buckling occurs in near of connection area, subsequently, the strain grows severely that is entitled as strain rise and then, is caused fracture. As a result, local buckling limits the ability of these members to form stable plastic hinges and the behavior is highly dependent on the width-thickness (b/t) and the depth-thickness ratio (h/t).Also, the thesis has been tried... 

Due to the inelasticity of the ground and geometric expansion, seismic waves are reduced by moving away from the center of wave propagation, which is called the attenuation of seismic waves. Therefore, the ground motions that occur at the site of the structures are different from the ground motions that are emitted from the source. The upcoming study investigates the attenuation of seismic waves in the geographical area of Iran based on the accelerogram data of Iran. Considering the consecutive occurrence of moderate to large earthquakes in Iran, the development of Iran's accelerography network, and the need to update the attenuation relationships by considering the parameters effective in... 

The purpose of this research is to study the behavior of some kind of conventional and retrofitted Khorjini connections, such as stress and strain concentration and eventually strain-jumping phenomenon. Thus the software ABAQUS 2019 was used to fabricate the FEM models of the connections with experimental prototypes. In analytical studies, 21 specimens with different sizes of the connection components were analyzed. True stress-strain curves for steel and weld materials were used and damage initiation and revolution were considered in the weld material. Also cracking of the welds was considered by a micromechanical method. The main defects of the connection are severe initial stiffness... 

Since 1906, after the earthquake of Messina in Italy, Italian engineers start developing a new method for increasing the resistance of a structure during an earthquake. With the limitation of time and technology, this method was acceptable for the time period. By developing the accelerographs and seismographs and the methods to process big data, new methods are developed and are being used in designing structures; new technologies allow engineers to analyze the performance of structures with ease. The studies in this research indicates that achieving the safety indices in any design require utilizing all dynamic properties of a structure such as period, stiffness and damping. In this... 

Many regulations around the world use the Newmark method, directly or indirectly, in the design spectrum. Research on the Newmark design spectrum shows that this spectrum sometimes significantly differs from the earthquakes response spectra that have occurred; therefore, it is necessary to develop and introduce new design spectra by modifying the Newmark method to be more compatible with reality. The developed design spectra in seismic regulations around the world are directly affected by the records involved in their development. Thus, the appropriate design spectrum should be prepared based on the seismic characteristics of the faults of each country. Evaluation of the Iranian Seismic... 

The present study looks into the fracture of perforated steel plates and their sensitivity in ductile fracture. It also examines the effects of strain rise phenomenon in these specimens. The main employed fracture model is VGM, which was first introduced by Rice and Tracey, and later enhanced by Kanvinde et al.. The general methodology includes finite element simulation and lab experiments on perforated plates, to determine ductility, strain concentration in hole periphery and model sensitivity. Fot thid purpose 86 steel sheet specimen with different holes and cuts were manufactured and tested. With the acquired data, the impact of strain concentration on the load carrying capabilities and... 

The concurrent flow of oil and water is a common occurrence in the field of multiphase flow in different fields including petroleum industry. In oil and gas, production engineers often face a situation in which more than one phase is flowing through the producers. In such conditions an accurate assessment of pressure loss inside the well plays a vital role in efficient and effective production planning. Changes in well orientation, wellbore diameter, reservoir and fluid properties as well as fluid flow rates are among parameters in which will affect the flow patterns that can occur inside a well during its life time. These flow patterns are created as a result of a competition between... 

Casing design is one of the most expensive parts in the drilling of oil wells, and any cost reduction with the basic design of these casing strings will significantly reduce the total cost of the operation. In recent years, occurring scenarios-based casing design has become popular; Because in many cases, it eliminates non-occurring scenarios such as gas kick and saves on drilling costs. In this study, we have tried to investigate all scenarios that may occur during the lifetime of the well, whether drilling or production, and for each well, based on its own field information, possible scenarios for each casing part are selected separately and the applying loads are calculated. For this...