Loading...
Search for: alimohammadi--maryam
0.111 seconds

    Fluence Map Optimization in IMRT Planning under Uncertainty

    , M.Sc. Thesis Sharif University of Technology Alimohammadi, Maryam (Author) ; Rafiee, Majid (Supervisor)
    Abstract
    Cancer is one of the main causes of death among all people around the world. This shows that more and more attention should be paid to cure cancer. One of the most common cancer treatments is radiation therapy. Among all radiation therapy treatments, Intensity-Modulated Radiation Therapy is a very effective and flexible ways to treat cancer. There are numerous mathematical problems to find the perfect treatment plan. One of these mathematical problems is Fluence Map Optimization in which we try to find the best dose intensity for each tumor and surrounding organs. The main purpose in this problem is to minimize the number of cancerous cells which are being destroyed while minimizing the... 

    Seismic Risk Assessment of Tehran Masonry School Buildings

    , M.Sc. Thesis Sharif University of Technology Alimohammadi, Hassan (Author) ; Bakhshi, Ali (Supervisor)
    Abstract
    This thesis aims to assess the seismic risk of the community of schools with masonry buildings in the Tehran metropolitan in the next 50 years and to prioritize the buildings of this community for seismic retrofit based on the optimal mitigation of risk of the community. Tehran is among the largest cities with the highest level of seismic risk in the world, and Masonry buildings are among the structures with poor seismic performance; Therefore, it is essential to conduct a comprehensive and accurate evaluation of the seismic risk of schools, as one of the most critical and sensitive occupancies, in this region and with this type of structure. It is also very beneficial to reduce the seismic... 

    Experimental and numerical investigation of the effect of a speed bump on car noise emission level

    , Article Applied Acoustics ; Volume 68, Issue 11-12 , 2007 , Pages 1346-1356 ; 0003682X (ISSN) Behzad, M ; Hodaei, M ; Alimohammadi, I ; Sharif University of Technology
    2007
    Abstract
    The noise emission level associated with two types of speed reducers has been investigated numerically and experimentally for different dimensions and different speeds of vehicle (20, 40 and 60 km/h) and zero acceleration. Numerical analysis has been performed using an FEM method in the ANSYS environment. The experiments show that for a bump of height 0.04 m, the peak noise level is increased by between 1 and 14 dB (A) whereas, for bump of height 0.055 m, the peak noise level increases by between 1 and 19 dB (A). There is an excellent agreement between the numerical and experimental results. © 2006 Elsevier Ltd. All rights reserved  

    Surface modification of polyether ether ketone implant with a novel nanocomposite coating containing poly (vinylidene fluoride) toward improving piezoelectric and bioactivity performance

    , Article Colloids and Surfaces B: Biointerfaces ; Volume 222 , 2023 ; 09277765 (ISSN) Alimohammadi, M ; Ramazani S. A., A ; Sharif University of Technology
    Elsevier B.V  2023
    Abstract
    Polyether ether ketone (PEEK) is an appropriate biomaterial for orthopedic implant applications due to its superior mechanical properties, chemical resistance, nontoxicity, and Magnetic resonance imaging (MRI) compatibility. Unfortunately, the inherent bio-inertness of PEEK restricted its application and required some modification to provide better bioactivity. Besides it, the generated electrical signals in the bone due to its piezoelectricity features have a vital role in regulating bone repair and regeneration. We aimed to modify the surface of PEEK with a dual-functionality nanocomposite that provides surface bioactivity and simulates the piezoelectricity of bone. So, we introduced a... 

    3d Design of a Microfluidic Chip for Anticancer Drugs Screening

    , M.Sc. Thesis Sharif University of Technology Hashemi, Maryam Sadat (Author) ; Mashayekhan, Shohreh (Supervisor) ; Saadatmand, Maryam (Supervisor)
    Abstract
    Nowadays, advanced and inexpensive pre-clinical methods for investigating the effects of anti-cancer drugs are expanding. One of the latest three-dimensional laboratory modeling for evaluating the effects of drugs is the use of tumor-on-chip technology, which actually models the physiological system of the body through three-dimensional scaffolds, multicellular cultures, and shaped vascular systems. In this study, three-dimensional culture of cancer cells was performed in the form of spheroids. A chip of U-shaped microstructures with and without gaps was used to trap cells and form cancer spheroids. We simulated the simultaneous effect of drug and oxygen concentration distribution inside the... 

    Studying Synchronization Control in Complex Systems

    , M.Sc. Thesis Sharif University of Technology Alimohammadi, Hamidreza (Author) ; Rahimi Tabar, Mohammad Reza (Supervisor)
    Abstract
    In this thesis, we review recent advances on controlling of complex systems. We provide in details, the concepts of synchronizability and synchronization controllability.Then we will investigate synchronization controllability under different pinning schemes, and propose a new pinning strategy to increase controllability and consequently decrease the number of required pinned nodes (known as driver nodes) to assure a stable synchronized state. We also study the network characteristics of resulted sequence of driver nodes. Finally, we will employ our proposed schemes to study the controllability of complex networks of chaotic Rossler oscillators  

    Falcaria vulgaris leaves extract as an eco-friendly corrosion inhibitor for mild steel in hydrochloric acid media

    , Article Scientific Reports ; Volume 13, Issue 1 , 2023 ; 20452322 (ISSN) Alimohammadi, M ; Ghaderi, M ; Ramazani Saadatabadi, A ; Mahdavian, M ; Sharif University of Technology
    Nature Research  2023
    Abstract
    Undoubtedly, metal corrosion is one of the most challenging problems faced by industries. Introducing corrosion inhibitors is a reasonable approach to protecting the metal surface. Due to environmental concerns and the toxicity of industrial organic corrosion inhibitors, researchers are continually exploring acceptable replacements. The current study focused on the application of Falcaria Vulgaris (FV) leaves extract to mitigate mild steel (MS) corrosion in a 1 M HCl environment. The polarization findings demonstrated that the corrosion current density decreased from 264.0 µA/cm2 (for the sample submerged in the blank solution) to 20.4 µA/cm2 when the optimal concentration of 800 ppm of FV... 

    Intelligent Force Control for Hydraulic Manipulator within the Impedance Control Framework

    , M.Sc. Thesis Sharif University of Technology Alimohammadi, Hossein (Author) ; Khayyat, Amir Ali Akbar (Supervisor)
    Abstract
    The main concept of this thesis is to simulate, develop, and analyze the performance of force control method by applying to a Unimate MK-II hydraulic manipulator. In this investigation, simulation studies are based on the concept of impedance control technique. Position-based formulation of impedance control is employed. First in this research, a PID controller is employed and is shown to be capable of performing position control task precisely despite the fact that inertia, joint stiction, valve deadband and other nonlinearities are presented. Although trajectory tracking is performed well after several investigations, we have concluded that the impedance control cannot perform a desirable... 

    Model Checking of Stochastic Activity Networks

    , M.Sc. Thesis Sharif University of Technology Maryam Bagheri (Author) ; Movaghar, Ali (Supervisor)
    Abstract
    Modeling and performance evaluation of the real time distributed systems is a significant problem. Stochastic activity network is one of the high level models used for this purpose. This network is an extension of generalized stochastic Petri net which is more powerful and flexible than other Petri net extensions. Checking the satisfiability of properties such as performance, dependability and user's expected properties is considerable in these models. Thus, using the approaches and generating modeling and model checking tools with the mentioned purpose is attractive. A model checker automatically checks the correctness of the system behaviors as properties against the model by getting the... 

    Robust Estimation and Control of a Planet Lander

    , M.Sc. Thesis Sharif University of Technology Ahmadvand, Reza (Author) ; Kiani, Maryam (Supervisor)
    Abstract
    This study has focused on the important problem of landing on a planet as an important current and future space mission. In this regard, dynamics modeling and integrated state estimation and control problems have been investigated in different views. To this aim, first a novel concurrent representation for translational and rotational kinematics has been developed based on the extension of modified Rodrigues parameters to dual space. This parameter set, called dual modified Rodrigues parameters (DMRP), is then utilized to establish an integrated roto-translational dynamic. The proposed DMRP-based kinematics and dynamics have been verified via comparison to traditional methods of... 

    Optimal Energy Trading in a Smart Grid Based on Extremum-seeking Algorithm

    , M.Sc. Thesis Sharif University of Technology Asgari, Houman (Author) ; Babazadeh, Maryam (Supervisor)
    Abstract
    Prevalent deployment of Distributed Energy Resources(DERs) in the demand side of electrical energy grids has several advantages such as greenhouse gases emission reduction, mitigation of power losses in the distribution grids and abatement of the dependency on the wholesale generation companies. At the same time, it paves the way for the advent of local interactive energy trading frameworks. In the following thesis, a distributed data-driven algorithm is developed for market-clearing in a community-based local energy market. The social welfare maximization is considered as the objective of the energy trading. The production and demand of electricity are the decision variables of sellers and... 

    Design of Microfluidic Chip for 3D Cell Culture

    , M.Sc. Thesis Sharif University of Technology Ghobadi, Faezeh (Author) ; Saadatmand, Maryam (Supervisor)
    Abstract
    Understanding biological systems requires extensive knowledge of individual parameters, and to study the processes of cell differentiation and cell behavior, a suitable environment must be created with the physiological conditions of the human body. For this purpose, with the knowledge of microfluidics, a microenvironment can be provided to study the behavior of cells on a small scale. The use of bone tissue model microfluidic chips is an alternative and new method in which it is possible to study the behavior of cells to differentiate into bone and to examine the toxicity of drugs, which in itself can help in the effective and successful treatment of these cases show. Therefore, in this... 

    Navigation and Control of a Free-Flying Satellite for Cargo Transportation and Placement in Intra-Vehicular Environment

    , M.Sc. Thesis Sharif University of Technology Moosavi, Farzan (Author) ; Kiani, Maryam (Supervisor)
    Abstract
    The main topic of this research is the navigation and control of a free-flying satellite with a robot manipulator while transferring and placing cargo on a space station. After connecting the cargo module, astronauts and robots need to deliver the available loads to the desired modules in a space station. Capturing an object or cargo is a critical issue studied extensively so far. However, delivery and placing of the cargo at the target point have not been investigated yet, to the best of the author’s knowledge; hence, this is a primary motivation for conducting the proposed research. After capturing the payload, the position and attitude of the manipulator with respect to the station’s... 

    Fabrication the Hydrogel Microfibers Using Bioprinter with Application in Cardiovascular Model

    , M.Sc. Thesis Sharif University of Technology Heidari, Faranak (Author) ; Saadatmand, Maryam (Supervisor)
    Abstract
    Cardiovascular disease (CVD) currently remains a considerable challenge for clinical treatments. CVDs account for N17.5 million deaths per year and will predictably increase to 23.6 million by 2030. The main purpose is to create human model systems to study the effect of disease mutations or drug treatment on the heart. In addition, engineered cardiac tissues are considered promising candidates to be transplanted to improve the function of diseased hearts. For engineered active tissues/organs, 3D bioprinting can fabricate complex tissue architecture with a spatiotemporal distribution of bioactive substances (cells, growth factors, and others) to better guide tissue regeneration. However,... 

    Utilizing Gaussian Processes to Learn Dynamics of Unknown Torques Acting on a Spacecraft

    , M.Sc. Thesis Sharif University of Technology Baradaran, Behdad (Author) ; Kiani, Maryam (Supervisor)
    Abstract
    Accurate and fast attitude estimation of a rigid body plays an essential role in the performance of a vehicle’s control system, especially aerospace vehicles. Ample works have been done to increase the accuracy and speed of the attitude estimation process, but all have been developed according to a model-based approach. This approach assumes that the torques acting on the body have a known dynamical model that is used for the attitude estimation. The purpose of the present research is to estimate the attitude via a model-free approach, i. e. dynamics of the torques acting on the body are no longer assumed to be known, and its learning is the next step. Thus, the problem formulation of this... 

    Stabilization and Pole-Placement by Structurally-Constrained Controllers: A Graph-Theoretic Approach

    , M.Sc. Thesis Sharif University of Technology Moushaee, Pegah (Author) ; Babazadeh, Maryam (Supervisor)
    Abstract
    This thesis presents a new approach to design structural output feedback controllers with stabilization and pole-placement at desired points on the S plane. It is assumed that the linear time-invariant system has no fixed mode corresponding to the specified control structure, outside the desired region of the closed-loop poles, such that the structural controller design problem is theoretically feasible. To this end, the structural output controller design problem is first transformed into a structurally equivalent problem based on the solution of a set of discrete linear programs. Then, by using the resultant structure, a new method is proposed for designing static and dynamic control loops... 

    Fabrication of Thick Scaffold with Microfluidic Channels by Bioprinter

    , M.Sc. Thesis Sharif University of Technology Khalighi, Sadaf (Author) ; Saadatmand, Maryam (Supervisor)
    Abstract
    Cardiovascular diseases are among the leading causes of death worldwide. For instance, in 2015, almost 31% of the world’s mortality rate was due to these causes. One of these diseases is cardiac coronary vessels’ occlusion which leads to the insufficient blood supply to the heart tissue and cardiomyocytes death after Myocardial Infarction (MI). After MI, a hierarchy of events in the heart tissue changes heart muscle and forms cardiac fibrosis. This fibrotic tissue does not have the native one’s properties and function, so it will cause cardiac arrest and patient death. Therefore, it is obvious that vascular network plays a crucial role in the heart function. The importance of cardiac... 

    Optimal Control of Unknown Interconnected Systems via Distributed Learning

    , M.Sc. Thesis Sharif University of Technology Farjadnasab, Milad (Author) ; Babazadeh, Maryam (Supervisor)
    Abstract
    This thesis addresses the problem of optimal distributed control of unknown interconnected systems. In order to deal with this problem, a data-driven learning framework for finding the optimal centralized and the suboptimal distributed controllers has been developed via convex optimization.First of all, the linear quadratic regulation (LQR) problem is formulated into a nonconvex optimization problem. Using Lagrangian duality theories, a semidefinite program is then developed that requires information about the system dynamics. It is shown that the optimal solution to this problem is independent of the initial conditions and represents the Q-function, an important concept in reinforcement... 

    Fixed-Time Consensus Control of Unknown Multi-Agent Systems Based on Distributed Reinforcement Learning

    , M.Sc. Thesis Sharif University of Technology Delshad, Aria (Author) ; Babazadeh, Maryam (Supervisor)
    Abstract
    This thesis introduces a distributed backstepping control strategy based on reinforcement learning to achieve fixed-time consensus in high-order nonlinear multi-agent systems. Each agent, whether a leader or a follower, is modeled using a strict feedback approach, incorporating uncertainties as unknown nonlinear functions and disturbance signals across all state variables. The communication network among agents can be either directed or undirected, with a fixed topology. Each follower employs a control law derived from actor-critic networks, utilizing only the outputs from neighboring agents. The proposed method combines virtual and actual backstepping control laws, formulated from two key... 

    Application of Machine Learning Algorithms in Analysis and Prediction of Football Goalkeepers Performance and their Valuation in the Transfer Market

    , M.Sc. Thesis Sharif University of Technology Zabihi, Matin (Author) ; Radman, Maryam (Supervisor)
    Abstract
    Football transformation into an industry with extraordinary financial flow has made this popular sport an attractive field for sports analysts. The development of the computer science and data science has led to the emergence of a concept called football match analysis. The goalkeepers, as a unique member of football teams and regrading their unique features and characteristics, play a crucial role in the outcome of competitions and the success of the teams. Therefore, analysis of various aspects of their performance is one of the essential issues in the application of data science in football. In this research, three separate parts have been studied. In the first part, by using pre-match...